everst log text file Below, as instructed in my Initial sound problem post.

plus, i get a Runtime error 372 for malware bytes- anti maleware program so it wont open for me

This post has been edited by Cazatuz: Jun 4 2009, 09:47 AM

reading my previous forum post will help you to understand this one...

http://www.geekstogo.com/forum/Please-Help...ll-t240747.html

This post has been edited by Cazatuz: May 31 2009, 01:31 PM

some 1 please respond please I really need help!!

help

Can I Get some help Here??

Cazatuz, bumping your post repeatedly will only delay getting help, as our helpers respond to those posts with no replies. When you repeatedly bump your topic, it appears that you're getting help. If it's been more than 3 days and you're still waiting, you may post in the Waiting Room. In the meantime, please watch your language - this is a family friendly site and obscenities will not be tolerated.

Hello Cazatuz

Welcome to G2Go.
=====================

• Download OTL to your desktop.
• Double click on the icon to run it. Make sure all other windows are closed and to let it run uninterrupted.
• When the window appears, underneath Output at the top change it to Minimal Output.
• Under the Standard Registry box change it to All.
• Check the boxes beside LOP Check and Purity Check.
• Click the Run Scan button. Do not change any settings unless otherwise told to do so. The scan wont take long.
  
  • When the scan completes, it will open two notepad windows. OTListIt.Txt and Extras.Txt. These are saved in the same location as OTListIt2.
  • Please copy (Edit->Select All, Edit->Copy) the contents of these files, one at a time, and post it with your next reply.

===========
Download This file. Note its name and save it to your root folder, such as C:\.

• Disconnect from the Internet and close all running programs.
• Temporarily disable any real-time active protection so your security program drivers will not conflict with this file.
• Click on this link to see a list of programs that should be disabled.
• Double-click on the downloaded file to start the program. (If running Vista, right click on it and select "Run as an Administrator")
• Allow the driver to load if asked.
• You may be prompted to scan immediately if it detects rootkit activity.
• If you are prompted to scan your system click "Yes" to begin the scan.
• If not prompted, click the "Rootkit/Malware" tab.
• On the right-side, all items to be scanned should be checked by default except for "Show All". Leave that box unchecked.
• Select all drives that are connected to your system to be scanned.
• Click the Scan button to begin. (Please be patient as it can take some time to complete)
• When the scan is finished, click Save to save the scan results to your Desktop.
• Save the file as Results.log and copy/paste the contents in your next reply.
• Exit the program and re-enable all active protection when done.