MiniToolBox by Farbar Version: 08-11-2012 Ran by JC-DEVO (administrator) on 08-11-2012 at 20:35:20 Microsoft Windows XP Home Edition Service Pack 3 (X86) Boot Mode: Normal *************************************************************************** ========================= IE Proxy Settings: ============================== Proxy is not enabled. No Proxy Server is set. ========================= FF Proxy Settings: ============================== ========================= Hosts content: ================================= 127.0.0.1 localhost ========================= IP Configuration: ================================ 1394 Net Adapter = 1394 Connection 2 (Connected) Broadcom 802.11g Network Adapter = Wireless Network Connection 27 (Media disconnected) Broadcom 802.11g Network Adapter = Wireless Network Connection 31 (Media disconnected) # ---------------------------------- # Interface IP Configuration # ---------------------------------- pushd interface ip # Interface IP Configuration for "Wireless Network Connection 31" set address name="Wireless Network Connection 31" source=dhcp set dns name="Wireless Network Connection 31" source=dhcp register=PRIMARY set wins name="Wireless Network Connection 31" source=dhcp # Interface IP Configuration for "Wireless Network Connection 27" set address name="Wireless Network Connection 27" source=dhcp set dns name="Wireless Network Connection 27" source=dhcp register=PRIMARY set wins name="Wireless Network Connection 27" source=dhcp popd # End of interface IP configuration Windows IP Configuration Host Name . . . . . . . . . . . . : music-f0e908da9 Primary Dns Suffix . . . . . . . : Node Type . . . . . . . . . . . . : Broadcast IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : No Ethernet adapter Wireless Network Connection 31: Media State . . . . . . . . . . . : Media disconnected Description . . . . . . . . . . . : Broadcom 802.11g Network Adapter #5 Physical Address. . . . . . . . . : 00-14-A5-57-65-D6 Ethernet adapter Wireless Network Connection 27: Media State . . . . . . . . . . . : Media disconnected Description . . . . . . . . . . . : Broadcom 802.11g Network Adapter Physical Address. . . . . . . . . : 00-14-A5-57-65-D6 Server: UnKnown Address: 127.0.0.1 Ping request could not find host google.com. Please check the name and try again. Server: UnKnown Address: 127.0.0.1 Ping request could not find host yahoo.com. Please check the name and try again. Server: UnKnown Address: 127.0.0.1 Ping request could not find host bleepingcomputer.com. Please check the name and try again. Pinging 127.0.0.1 with 32 bytes of data: Reply from 127.0.0.1: bytes=32 time<1ms TTL=128 Reply from 127.0.0.1: bytes=32 time<1ms TTL=128 Ping statistics for 127.0.0.1: Packets: Sent = 2, Received = 2, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 0ms, Maximum = 0ms, Average = 0ms =========================================================================== Interface List 0x1 ........................... MS TCP Loopback interface 0x2 ...00 14 a5 57 65 d6 ...... Broadcom 802.11g Network Adapter #5 - McAfee Core NDIS Intermediate Filter Miniport 0x3 ...00 14 a5 57 65 d6 ...... Broadcom 802.11g Network Adapter - McAfee Core NDIS Intermediate Filter Miniport =========================================================================== =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 127.0.0.0 255.0.0.0 127.0.0.1 127.0.0.1 1 255.255.255.255 255.255.255.255 255.255.255.255 3 1 255.255.255.255 255.255.255.255 255.255.255.255 2 1 =========================================================================== Persistent Routes: None ========================= Winsock entries ===================================== Catalog5 01 C:\Windows\System32\mswsock.dll [245248] (Microsoft Corporation) Catalog5 02 C:\Windows\System32\winrnr.dll [16896] (Microsoft Corporation) Catalog5 03 C:\Windows\System32\mswsock.dll [245248] (Microsoft Corporation) Catalog9 01 C:\Windows\system32\mswsock.dll [245248] (Microsoft Corporation) Catalog9 02 C:\Windows\system32\mswsock.dll [245248] (Microsoft Corporation) Catalog9 03 C:\Windows\system32\mswsock.dll [245248] (Microsoft Corporation) Catalog9 04 C:\Windows\system32\rsvpsp.dll [92672] (Microsoft Corporation) Catalog9 05 C:\Windows\system32\rsvpsp.dll [92672] (Microsoft Corporation) Catalog9 06 C:\Windows\system32\mswsock.dll [245248] (Microsoft Corporation) Catalog9 07 C:\Windows\system32\mswsock.dll [245248] (Microsoft Corporation) Catalog9 08 C:\Windows\system32\mswsock.dll [245248] (Microsoft Corporation) Catalog9 09 C:\Windows\system32\mswsock.dll [245248] (Microsoft Corporation) Catalog9 10 C:\Windows\system32\mswsock.dll [245248] (Microsoft Corporation) Catalog9 11 C:\Windows\system32\mswsock.dll [245248] (Microsoft Corporation) Catalog9 12 C:\Windows\system32\mswsock.dll [245248] (Microsoft Corporation) Catalog9 13 C:\Windows\system32\mswsock.dll [245248] (Microsoft Corporation) Catalog9 14 C:\Windows\system32\mswsock.dll [245248] (Microsoft Corporation) Catalog9 15 C:\Windows\system32\mswsock.dll [245248] (Microsoft Corporation) Catalog9 16 C:\Windows\system32\mswsock.dll [245248] (Microsoft Corporation) Catalog9 17 C:\Windows\system32\mswsock.dll [245248] (Microsoft Corporation) Catalog9 18 C:\Windows\system32\mswsock.dll [245248] (Microsoft Corporation) Catalog9 19 C:\Windows\system32\mswsock.dll [245248] (Microsoft Corporation) Catalog9 20 C:\Windows\system32\mswsock.dll [245248] (Microsoft Corporation) Catalog9 21 C:\Windows\system32\mswsock.dll [245248] (Microsoft Corporation) Catalog9 22 C:\Windows\system32\mswsock.dll [245248] (Microsoft Corporation) Catalog9 23 C:\Windows\system32\mswsock.dll [245248] (Microsoft Corporation) Catalog9 24 C:\Windows\system32\mswsock.dll [245248] (Microsoft Corporation) Catalog9 25 C:\Windows\system32\mswsock.dll [245248] (Microsoft Corporation) Catalog9 26 C:\Windows\system32\mswsock.dll [245248] (Microsoft Corporation) Catalog9 27 C:\Windows\system32\mswsock.dll [245248] (Microsoft Corporation) Catalog9 28 C:\Windows\system32\mswsock.dll [245248] (Microsoft Corporation) Catalog9 29 C:\Windows\system32\mswsock.dll [245248] (Microsoft Corporation) Catalog9 30 C:\Windows\system32\mswsock.dll [245248] (Microsoft Corporation) Catalog9 31 C:\Windows\system32\mswsock.dll [245248] (Microsoft Corporation) Catalog9 32 C:\Windows\system32\mswsock.dll [245248] (Microsoft Corporation) Catalog9 33 C:\Windows\system32\mswsock.dll [245248] (Microsoft Corporation) Catalog9 34 C:\Windows\system32\mswsock.dll [245248] (Microsoft Corporation) Catalog9 35 C:\Windows\system32\mswsock.dll [245248] (Microsoft Corporation) Catalog9 36 C:\Windows\system32\mswsock.dll [245248] (Microsoft Corporation) Catalog9 37 C:\Windows\system32\mswsock.dll [245248] (Microsoft Corporation) Catalog9 38 C:\Windows\system32\mswsock.dll [245248] (Microsoft Corporation) Catalog9 39 C:\Windows\system32\mswsock.dll [245248] (Microsoft Corporation) Catalog9 40 C:\Windows\system32\mswsock.dll [245248] (Microsoft Corporation) Catalog9 41 C:\Windows\system32\mswsock.dll [245248] (Microsoft Corporation) Catalog9 42 C:\Windows\system32\mswsock.dll [245248] (Microsoft Corporation) Catalog9 43 C:\Windows\system32\mswsock.dll [245248] (Microsoft Corporation) Catalog9 44 C:\Windows\system32\mswsock.dll [245248] (Microsoft Corporation) Catalog9 45 C:\Windows\system32\mswsock.dll [245248] (Microsoft Corporation) Catalog9 46 C:\Windows\system32\mswsock.dll [245248] (Microsoft Corporation) Catalog9 47 C:\Windows\system32\mswsock.dll [245248] (Microsoft Corporation) Catalog9 48 C:\Windows\system32\mswsock.dll [245248] (Microsoft Corporation) Catalog9 49 C:\Windows\system32\mswsock.dll [245248] (Microsoft Corporation) Catalog9 50 C:\Windows\system32\mswsock.dll [245248] (Microsoft Corporation) Catalog9 51 C:\Windows\system32\mswsock.dll [245248] (Microsoft Corporation) Catalog9 52 C:\Windows\system32\mswsock.dll [245248] (Microsoft Corporation) Catalog9 53 C:\Windows\system32\mswsock.dll [245248] (Microsoft Corporation) Catalog9 54 C:\Windows\system32\mswsock.dll [245248] (Microsoft Corporation) Catalog9 55 C:\Windows\system32\mswsock.dll [245248] (Microsoft Corporation) Catalog9 56 C:\Windows\system32\mswsock.dll [245248] (Microsoft Corporation) Catalog9 57 C:\Windows\system32\mswsock.dll [245248] (Microsoft Corporation) Catalog9 58 C:\Windows\system32\mswsock.dll [245248] (Microsoft Corporation) Catalog9 59 C:\Windows\system32\mswsock.dll [245248] (Microsoft Corporation) Catalog9 60 C:\Windows\system32\mswsock.dll [245248] (Microsoft Corporation) Catalog9 61 C:\Windows\system32\mswsock.dll [245248] (Microsoft Corporation) Catalog9 62 C:\Windows\system32\mswsock.dll [245248] (Microsoft Corporation) Catalog9 63 C:\Windows\system32\mswsock.dll [245248] (Microsoft Corporation) Catalog9 64 C:\Windows\system32\mswsock.dll [245248] (Microsoft Corporation) Catalog9 65 C:\Windows\system32\mswsock.dll [245248] (Microsoft Corporation) Catalog9 66 C:\Windows\system32\mswsock.dll [245248] (Microsoft Corporation) Catalog9 67 C:\Windows\system32\mswsock.dll [245248] (Microsoft Corporation) Catalog9 68 C:\Windows\system32\mswsock.dll [245248] (Microsoft Corporation) Catalog9 69 C:\Windows\system32\mswsock.dll [245248] (Microsoft Corporation) Catalog9 70 C:\Windows\system32\mswsock.dll [245248] (Microsoft Corporation) Catalog9 71 C:\Windows\system32\mswsock.dll [245248] (Microsoft Corporation) Catalog9 72 C:\Windows\system32\mswsock.dll [245248] (Microsoft Corporation) Catalog9 73 C:\Windows\system32\mswsock.dll [245248] (Microsoft Corporation) ========================= Event log errors: =============================== Application errors: ================== Error: (11/08/2012 07:59:04 PM) (Source: Application Error) (User: ) Description: Faulting application mcshield.exe, version 14.4.0.387, faulting module unknown, version 0.0.0.0, fault address 0x120021c9. Processing media-specific event for [mcshield.exe!ws!] Error: (11/08/2012 07:58:51 PM) (Source: McLogEvent) (User: NT AUTHORITY) Description: VSCORE.14.4.0.387 Exception Code : 0XC0000005 Exception Address : 0X120021C9 Exception Parameters : 2 Param 1 = 00000000 Param 2 = 0X120021C9 More information : Error: (11/08/2012 07:57:45 PM) (Source: Application Error) (User: ) Description: Faulting application McSvHost.exe, version 2.0.230.0, faulting module unknown, version 0.0.0.0, fault address 0x01310296. Processing media-specific event for [McSvHost.exe!ws!] Error: (11/07/2012 06:48:10 AM) (Source: McLogEvent) (User: NT AUTHORITY) Description: C:\Program Files\Common Files\McAfee\SystemCore\mcshield.exe900003164 (0xc5c)0x7C90E514 Build VSCORE.14.4.0.387 / 5400.1158 Object being scanned = \Device\HarddiskVolume1\Program Files\McAfee\VirusScan\MVsCfg.dll by C:\Program Files\Malwarebytes' Anti-Malware\mbamservice.exe 4(0)(0) 4(0)(0) 7200(0)(0) 7595(0)(0) 7005(0)(0) 7004(0)(0) 5006(0)(0) 5004(0)(0) Error: (10/26/2012 07:42:54 PM) (Source: crypt32) (User: ) Description: Failed auto update retrieval of third-party root list sequence number from: with error: This network connection does not exist. Error: (10/26/2012 07:42:54 PM) (Source: crypt32) (User: ) Description: Failed auto update retrieval of third-party root list sequence number from: with error: This network connection does not exist. Error: (10/26/2012 07:42:54 PM) (Source: crypt32) (User: ) Description: Failed auto update retrieval of third-party root list sequence number from: with error: This network connection does not exist. Error: (10/26/2012 07:42:54 PM) (Source: crypt32) (User: ) Description: Failed auto update retrieval of third-party root list sequence number from: with error: This network connection does not exist. Error: (10/26/2012 07:42:54 PM) (Source: crypt32) (User: ) Description: Failed auto update retrieval of third-party root list sequence number from: with error: This network connection does not exist. Error: (10/26/2012 07:42:54 PM) (Source: crypt32) (User: ) Description: Failed auto update retrieval of third-party root list sequence number from: with error: This network connection does not exist. System errors: ============= Error: (11/08/2012 08:01:13 PM) (Source: 0) (User: ) Description: IRQARB80 Error: (11/08/2012 08:01:13 PM) (Source: 0) (User: ) Description: IRQARB70 Error: (11/08/2012 08:01:13 PM) (Source: 0) (User: ) Description: IRQARB60 Error: (11/08/2012 08:01:13 PM) (Source: 0) (User: ) Description: IRQARB50 Error: (11/08/2012 08:01:13 PM) (Source: 0) (User: ) Description: IRQARB30 Error: (11/08/2012 08:01:13 PM) (Source: 0) (User: ) Description: IRQARB20 Error: (11/08/2012 08:01:13 PM) (Source: 0) (User: ) Description: IRQARB10 Error: (11/08/2012 08:00:57 PM) (Source: 0) (User: ) Description: IRQARB80 Error: (11/08/2012 08:00:57 PM) (Source: 0) (User: ) Description: IRQARB70 Error: (11/08/2012 08:00:57 PM) (Source: 0) (User: ) Description: IRQARB60 Microsoft Office Sessions: ========================= Error: (11/08/2012 07:59:04 PM) (Source: Application Error)(User: ) Description: mcshield.exe14.4.0.387unknown0.0.0.0120021c9 Error: (11/08/2012 07:58:51 PM) (Source: McLogEvent)(User: NT AUTHORITY) Description: VSCORE.14.4.0.387 Exception Code : 0XC0000005 Exception Address : 0X120021C9 Exception Parameters : 2 Param 1 = 00000000 Param 2 = 0X120021C9 More information : Error: (11/08/2012 07:57:45 PM) (Source: Application Error)(User: ) Description: McSvHost.exe2.0.230.0unknown0.0.0.001310296 Error: (11/07/2012 06:48:10 AM) (Source: McLogEvent)(User: NT AUTHORITY) Description: C:\Program Files\Common Files\McAfee\SystemCore\mcshield.exe900003164 (0xc5c)0x7C90E514 Build VSCORE.14.4.0.387 / 5400.1158 Object being scanned = \Device\HarddiskVolume1\Program Files\McAfee\VirusScan\MVsCfg.dll by C:\Program Files\Malwarebytes' Anti-Malware\mbamservice.exe 4(0)(0) 4(0)(0) 7200(0)(0) 7595(0)(0) 7005(0)(0) 7004(0)(0) 5006(0)(0) 5004(0)(0) Error: (10/26/2012 07:42:54 PM) (Source: crypt32)(User: ) Description: http://www.download.windowsupdate.com/msdownload/update/v3/static/trustedr/en/authrootseq.txtThis network connection does not exist. Error: (10/26/2012 07:42:54 PM) (Source: crypt32)(User: ) Description: http://www.download.windowsupdate.com/msdownload/update/v3/static/trustedr/en/authrootseq.txtThis network connection does not exist. Error: (10/26/2012 07:42:54 PM) (Source: crypt32)(User: ) Description: http://www.download.windowsupdate.com/msdownload/update/v3/static/trustedr/en/authrootseq.txtThis network connection does not exist. Error: (10/26/2012 07:42:54 PM) (Source: crypt32)(User: ) Description: http://www.download.windowsupdate.com/msdownload/update/v3/static/trustedr/en/authrootseq.txtThis network connection does not exist. Error: (10/26/2012 07:42:54 PM) (Source: crypt32)(User: ) Description: http://www.download.windowsupdate.com/msdownload/update/v3/static/trustedr/en/authrootseq.txtThis network connection does not exist. Error: (10/26/2012 07:42:54 PM) (Source: crypt32)(User: ) Description: http://www.download.windowsupdate.com/msdownload/update/v3/static/trustedr/en/authrootseq.txtThis network connection does not exist. =========================== Installed Programs ============================ ACE Mega CoDecS Pack (Version: 6.03.0911) Adobe Flash Player 11 ActiveX (Version: 11.4.402.287) Adobe Flash Player 11 Plugin (Version: 11.4.402.287) ATI - Software Uninstall Utility (Version: 6.14.10.1010) ATI Control Panel (Version: 6.14.10.5134) ATI Display Driver (Version: 8.082-041130a-020223C-Gateway) CCleaner (Version: 3.19) Conexant AC-Link Audio Malwarebytes Anti-Malware version 1.60.0.1800 (Version: 1.60.0.1800) Microsoft Compression Client Pack 1.0 for Windows XP (Version: 1) Microsoft Office Access MUI (English) 2010 (Version: 14.0.4763.1000) Microsoft Office Access Setup Metadata MUI (English) 2010 (Version: 14.0.4763.1000) Microsoft Office Excel MUI (English) 2010 (Version: 14.0.4763.1000) Microsoft Office Groove MUI (English) 2010 (Version: 14.0.4763.1000) Microsoft Office InfoPath MUI (English) 2010 (Version: 14.0.4763.1000) Microsoft Office OneNote MUI (English) 2010 (Version: 14.0.4763.1000) Microsoft Office Outlook MUI (English) 2010 (Version: 14.0.4763.1000) Microsoft Office PowerPoint MUI (English) 2010 (Version: 14.0.4763.1000) Microsoft Office Professional Plus 2010 (Version: 14.0.4763.1000) Microsoft Office Proof (English) 2010 (Version: 14.0.4763.1000) Microsoft Office Proof (French) 2010 (Version: 14.0.4763.1000) Microsoft Office Proof (Spanish) 2010 (Version: 14.0.4763.1000) Microsoft Office Proofing (English) 2010 (Version: 14.0.4763.1000) Microsoft Office Publisher MUI (English) 2010 (Version: 14.0.4763.1000) Microsoft Office Shared MUI (English) 2010 (Version: 14.0.4763.1000) Microsoft Office Shared Setup Metadata MUI (English) 2010 (Version: 14.0.4763.1000) Microsoft Office Word MUI (English) 2010 (Version: 14.0.4763.1000) Microsoft Software Update for Web Folders (English) 14 (Version: 14.0.4763.1000) Microsoft User-Mode Driver Framework Feature Pack 1.0 Mozilla Firefox 16.0.1 (x86 en-US) (Version: 16.0.1) Mozilla Maintenance Service (Version: 16.0.1) Soft Data Fax Modem with SmartCP Texas Instruments PCIxx21/x515 drivers. (Version: 1.09.0000) Texas Instruments PCIxx21/x515/xx12 drivers. (Version: 1.21.0000) TIPCI (Version: 1.21.0000) TIxx21 (Version: 1.09.0000) Update for Windows Internet Explorer 8 (KB2598845) (Version: 1) Update for Windows XP (KB2345886) (Version: 1) Update for Windows XP (KB2467659) (Version: 1) Update for Windows XP (KB2661254-v2) (Version: 2) Update for Windows XP (KB2736233) (Version: 1) Update for Windows XP (KB2749655) (Version: 1) Update for Windows XP (KB898461) (Version: 1) Update for Windows XP (KB951978) (Version: 1) Update for Windows XP (KB955759) (Version: 1) Update for Windows XP (KB968389) (Version: 1) Update for Windows XP (KB971029) (Version: 1) Update for Windows XP (KB973815) (Version: 1) VirtualDJ PRO Full (Version: 7.0.3) WebFldrs XP (Version: 9.50.7523) Windows Genuine Advantage Validation Tool (KB892130) Windows Genuine Advantage Validation Tool (KB892130) (Version: 1.7.0069.2) Windows Internet Explorer 8 (Version: 20090308.140743) Windows Media Format 11 runtime Windows Media Player 11 ========================= Devices: ================================ Name: Broadcom 802.11g Network Adapter #2 Description: Broadcom 802.11g Network Adapter Class Guid: {4D36E972-E325-11CE-BFC1-08002BE10318} Manufacturer: Broadcom Service: BCM43XX Problem: : This device cannot find enough free resources that it can use. If you want to use this device, you will need to disable one of the other devices on this system. (Code12) Resolution: Two devices have been assigned the same input/output (I/O) ports, the same interrupt, or the same Direct Memory Access channel (either by the BIOS, the operating system, or a combination of the two). This error message can also appear if the BIOS did not allocate enough resources to the device (for example, if a universal serial bus (USB) controller does not get an interrupt from the BIOS because of a corrupt Multiprocessor System (MPS) table). You can use Device Manager to determine where the conflict is and disable the conflicting device. On the "General Properties" tab of the device, click "Troubleshoot" to start the troubleshooting wizard. Name: Broadcom 802.11g Network Adapter #3 Description: Broadcom 802.11g Network Adapter Class Guid: {4D36E972-E325-11CE-BFC1-08002BE10318} Manufacturer: Broadcom Service: BCM43XX Problem: : This device cannot find enough free resources that it can use. If you want to use this device, you will need to disable one of the other devices on this system. (Code12) Resolution: Two devices have been assigned the same input/output (I/O) ports, the same interrupt, or the same Direct Memory Access channel (either by the BIOS, the operating system, or a combination of the two). This error message can also appear if the BIOS did not allocate enough resources to the device (for example, if a universal serial bus (USB) controller does not get an interrupt from the BIOS because of a corrupt Multiprocessor System (MPS) table). You can use Device Manager to determine where the conflict is and disable the conflicting device. On the "General Properties" tab of the device, click "Troubleshoot" to start the troubleshooting wizard. Name: Broadcom 802.11g Network Adapter #4 Description: Broadcom 802.11g Network Adapter Class Guid: {4D36E972-E325-11CE-BFC1-08002BE10318} Manufacturer: Broadcom Service: BCM43XX Problem: : This device cannot find enough free resources that it can use. If you want to use this device, you will need to disable one of the other devices on this system. (Code12) Resolution: Two devices have been assigned the same input/output (I/O) ports, the same interrupt, or the same Direct Memory Access channel (either by the BIOS, the operating system, or a combination of the two). This error message can also appear if the BIOS did not allocate enough resources to the device (for example, if a universal serial bus (USB) controller does not get an interrupt from the BIOS because of a corrupt Multiprocessor System (MPS) table). You can use Device Manager to determine where the conflict is and disable the conflicting device. On the "General Properties" tab of the device, click "Troubleshoot" to start the troubleshooting wizard. Name: Broadcom 802.11g Network Adapter #6 Description: Broadcom 802.11g Network Adapter Class Guid: {4D36E972-E325-11CE-BFC1-08002BE10318} Manufacturer: Broadcom Service: BCM43XX Problem: : This device cannot find enough free resources that it can use. If you want to use this device, you will need to disable one of the other devices on this system. (Code12) Resolution: Two devices have been assigned the same input/output (I/O) ports, the same interrupt, or the same Direct Memory Access channel (either by the BIOS, the operating system, or a combination of the two). This error message can also appear if the BIOS did not allocate enough resources to the device (for example, if a universal serial bus (USB) controller does not get an interrupt from the BIOS because of a corrupt Multiprocessor System (MPS) table). You can use Device Manager to determine where the conflict is and disable the conflicting device. On the "General Properties" tab of the device, click "Troubleshoot" to start the troubleshooting wizard. Name: Broadcom 802.11g Network Adapter #7 Description: Broadcom 802.11g Network Adapter Class Guid: {4D36E972-E325-11CE-BFC1-08002BE10318} Manufacturer: Broadcom Service: BCM43XX Problem: : This device cannot find enough free resources that it can use. If you want to use this device, you will need to disable one of the other devices on this system. (Code12) Resolution: Two devices have been assigned the same input/output (I/O) ports, the same interrupt, or the same Direct Memory Access channel (either by the BIOS, the operating system, or a combination of the two). This error message can also appear if the BIOS did not allocate enough resources to the device (for example, if a universal serial bus (USB) controller does not get an interrupt from the BIOS because of a corrupt Multiprocessor System (MPS) table). You can use Device Manager to determine where the conflict is and disable the conflicting device. On the "General Properties" tab of the device, click "Troubleshoot" to start the troubleshooting wizard. Name: Broadcom 802.11g Network Adapter #8 Description: Broadcom 802.11g Network Adapter Class Guid: {4D36E972-E325-11CE-BFC1-08002BE10318} Manufacturer: Broadcom Service: BCM43XX Problem: : This device cannot find enough free resources that it can use. If you want to use this device, you will need to disable one of the other devices on this system. (Code12) Resolution: Two devices have been assigned the same input/output (I/O) ports, the same interrupt, or the same Direct Memory Access channel (either by the BIOS, the operating system, or a combination of the two). This error message can also appear if the BIOS did not allocate enough resources to the device (for example, if a universal serial bus (USB) controller does not get an interrupt from the BIOS because of a corrupt Multiprocessor System (MPS) table). You can use Device Manager to determine where the conflict is and disable the conflicting device. On the "General Properties" tab of the device, click "Troubleshoot" to start the troubleshooting wizard. Name: Broadcom 802.11g Network Adapter #9 Description: Broadcom 802.11g Network Adapter Class Guid: {4D36E972-E325-11CE-BFC1-08002BE10318} Manufacturer: Broadcom Service: BCM43XX Problem: : This device cannot find enough free resources that it can use. If you want to use this device, you will need to disable one of the other devices on this system. (Code12) Resolution: Two devices have been assigned the same input/output (I/O) ports, the same interrupt, or the same Direct Memory Access channel (either by the BIOS, the operating system, or a combination of the two). This error message can also appear if the BIOS did not allocate enough resources to the device (for example, if a universal serial bus (USB) controller does not get an interrupt from the BIOS because of a corrupt Multiprocessor System (MPS) table). You can use Device Manager to determine where the conflict is and disable the conflicting device. On the "General Properties" tab of the device, click "Troubleshoot" to start the troubleshooting wizard. Name: Broadcom 802.11g Network Adapter #10 Description: Broadcom 802.11g Network Adapter Class Guid: {4D36E972-E325-11CE-BFC1-08002BE10318} Manufacturer: Broadcom Service: BCM43XX Problem: : This device cannot find enough free resources that it can use. If you want to use this device, you will need to disable one of the other devices on this system. (Code12) Resolution: Two devices have been assigned the same input/output (I/O) ports, the same interrupt, or the same Direct Memory Access channel (either by the BIOS, the operating system, or a combination of the two). This error message can also appear if the BIOS did not allocate enough resources to the device (for example, if a universal serial bus (USB) controller does not get an interrupt from the BIOS because of a corrupt Multiprocessor System (MPS) table). You can use Device Manager to determine where the conflict is and disable the conflicting device. On the "General Properties" tab of the device, click "Troubleshoot" to start the troubleshooting wizard. Name: Broadcom 802.11g Network Adapter #11 Description: Broadcom 802.11g Network Adapter Class Guid: {4D36E972-E325-11CE-BFC1-08002BE10318} Manufacturer: Broadcom Service: BCM43XX Problem: : This device cannot find enough free resources that it can use. If you want to use this device, you will need to disable one of the other devices on this system. (Code12) Resolution: Two devices have been assigned the same input/output (I/O) ports, the same interrupt, or the same Direct Memory Access channel (either by the BIOS, the operating system, or a combination of the two). This error message can also appear if the BIOS did not allocate enough resources to the device (for example, if a universal serial bus (USB) controller does not get an interrupt from the BIOS because of a corrupt Multiprocessor System (MPS) table). You can use Device Manager to determine where the conflict is and disable the conflicting device. On the "General Properties" tab of the device, click "Troubleshoot" to start the troubleshooting wizard. Name: Broadcom 802.11g Network Adapter #12 Description: Broadcom 802.11g Network Adapter Class Guid: {4D36E972-E325-11CE-BFC1-08002BE10318} Manufacturer: Broadcom Service: BCM43XX Problem: : This device cannot find enough free resources that it can use. If you want to use this device, you will need to disable one of the other devices on this system. (Code12) Resolution: Two devices have been assigned the same input/output (I/O) ports, the same interrupt, or the same Direct Memory Access channel (either by the BIOS, the operating system, or a combination of the two). This error message can also appear if the BIOS did not allocate enough resources to the device (for example, if a universal serial bus (USB) controller does not get an interrupt from the BIOS because of a corrupt Multiprocessor System (MPS) table). You can use Device Manager to determine where the conflict is and disable the conflicting device. On the "General Properties" tab of the device, click "Troubleshoot" to start the troubleshooting wizard. Name: Broadcom 802.11g Network Adapter #13 Description: Broadcom 802.11g Network Adapter Class Guid: {4D36E972-E325-11CE-BFC1-08002BE10318} Manufacturer: Broadcom Service: BCM43XX Problem: : This device cannot find enough free resources that it can use. If you want to use this device, you will need to disable one of the other devices on this system. (Code12) Resolution: Two devices have been assigned the same input/output (I/O) ports, the same interrupt, or the same Direct Memory Access channel (either by the BIOS, the operating system, or a combination of the two). This error message can also appear if the BIOS did not allocate enough resources to the device (for example, if a universal serial bus (USB) controller does not get an interrupt from the BIOS because of a corrupt Multiprocessor System (MPS) table). You can use Device Manager to determine where the conflict is and disable the conflicting device. On the "General Properties" tab of the device, click "Troubleshoot" to start the troubleshooting wizard. Name: Broadcom 802.11g Network Adapter #14 Description: Broadcom 802.11g Network Adapter Class Guid: {4D36E972-E325-11CE-BFC1-08002BE10318} Manufacturer: Broadcom Service: BCM43XX Problem: : This device cannot find enough free resources that it can use. If you want to use this device, you will need to disable one of the other devices on this system. (Code12) Resolution: Two devices have been assigned the same input/output (I/O) ports, the same interrupt, or the same Direct Memory Access channel (either by the BIOS, the operating system, or a combination of the two). This error message can also appear if the BIOS did not allocate enough resources to the device (for example, if a universal serial bus (USB) controller does not get an interrupt from the BIOS because of a corrupt Multiprocessor System (MPS) table). You can use Device Manager to determine where the conflict is and disable the conflicting device. On the "General Properties" tab of the device, click "Troubleshoot" to start the troubleshooting wizard. Name: Broadcom 802.11g Network Adapter #15 Description: Broadcom 802.11g Network Adapter Class Guid: {4D36E972-E325-11CE-BFC1-08002BE10318} Manufacturer: Broadcom Service: BCM43XX Problem: : This device cannot find enough free resources that it can use. If you want to use this device, you will need to disable one of the other devices on this system. (Code12) Resolution: Two devices have been assigned the same input/output (I/O) ports, the same interrupt, or the same Direct Memory Access channel (either by the BIOS, the operating system, or a combination of the two). This error message can also appear if the BIOS did not allocate enough resources to the device (for example, if a universal serial bus (USB) controller does not get an interrupt from the BIOS because of a corrupt Multiprocessor System (MPS) table). You can use Device Manager to determine where the conflict is and disable the conflicting device. On the "General Properties" tab of the device, click "Troubleshoot" to start the troubleshooting wizard. Name: Broadcom 802.11g Network Adapter #16 Description: Broadcom 802.11g Network Adapter Class Guid: {4D36E972-E325-11CE-BFC1-08002BE10318} Manufacturer: Broadcom Service: BCM43XX Problem: : This device cannot find enough free resources that it can use. If you want to use this device, you will need to disable one of the other devices on this system. (Code12) Resolution: Two devices have been assigned the same input/output (I/O) ports, the same interrupt, or the same Direct Memory Access channel (either by the BIOS, the operating system, or a combination of the two). This error message can also appear if the BIOS did not allocate enough resources to the device (for example, if a universal serial bus (USB) controller does not get an interrupt from the BIOS because of a corrupt Multiprocessor System (MPS) table). You can use Device Manager to determine where the conflict is and disable the conflicting device. On the "General Properties" tab of the device, click "Troubleshoot" to start the troubleshooting wizard. Name: Broadcom 802.11g Network Adapter #17 Description: Broadcom 802.11g Network Adapter Class Guid: {4D36E972-E325-11CE-BFC1-08002BE10318} Manufacturer: Broadcom Service: BCM43XX Problem: : This device cannot find enough free resources that it can use. If you want to use this device, you will need to disable one of the other devices on this system. (Code12) Resolution: Two devices have been assigned the same input/output (I/O) ports, the same interrupt, or the same Direct Memory Access channel (either by the BIOS, the operating system, or a combination of the two). This error message can also appear if the BIOS did not allocate enough resources to the device (for example, if a universal serial bus (USB) controller does not get an interrupt from the BIOS because of a corrupt Multiprocessor System (MPS) table). You can use Device Manager to determine where the conflict is and disable the conflicting device. On the "General Properties" tab of the device, click "Troubleshoot" to start the troubleshooting wizard. Name: Broadcom 802.11g Network Adapter #18 Description: Broadcom 802.11g Network Adapter Class Guid: {4D36E972-E325-11CE-BFC1-08002BE10318} Manufacturer: Broadcom Service: BCM43XX Problem: : This device cannot find enough free resources that it can use. If you want to use this device, you will need to disable one of the other devices on this system. (Code12) Resolution: Two devices have been assigned the same input/output (I/O) ports, the same interrupt, or the same Direct Memory Access channel (either by the BIOS, the operating system, or a combination of the two). This error message can also appear if the BIOS did not allocate enough resources to the device (for example, if a universal serial bus (USB) controller does not get an interrupt from the BIOS because of a corrupt Multiprocessor System (MPS) table). You can use Device Manager to determine where the conflict is and disable the conflicting device. On the "General Properties" tab of the device, click "Troubleshoot" to start the troubleshooting wizard. Name: Broadcom 802.11g Network Adapter #19 Description: Broadcom 802.11g Network Adapter Class Guid: {4D36E972-E325-11CE-BFC1-08002BE10318} Manufacturer: Broadcom Service: BCM43XX Problem: : This device cannot find enough free resources that it can use. If you want to use this device, you will need to disable one of the other devices on this system. (Code12) Resolution: Two devices have been assigned the same input/output (I/O) ports, the same interrupt, or the same Direct Memory Access channel (either by the BIOS, the operating system, or a combination of the two). This error message can also appear if the BIOS did not allocate enough resources to the device (for example, if a universal serial bus (USB) controller does not get an interrupt from the BIOS because of a corrupt Multiprocessor System (MPS) table). You can use Device Manager to determine where the conflict is and disable the conflicting device. On the "General Properties" tab of the device, click "Troubleshoot" to start the troubleshooting wizard. Name: Broadcom 802.11g Network Adapter #20 Description: Broadcom 802.11g Network Adapter Class Guid: {4D36E972-E325-11CE-BFC1-08002BE10318} Manufacturer: Broadcom Service: BCM43XX Problem: : This device cannot find enough free resources that it can use. If you want to use this device, you will need to disable one of the other devices on this system. (Code12) Resolution: Two devices have been assigned the same input/output (I/O) ports, the same interrupt, or the same Direct Memory Access channel (either by the BIOS, the operating system, or a combination of the two). This error message can also appear if the BIOS did not allocate enough resources to the device (for example, if a universal serial bus (USB) controller does not get an interrupt from the BIOS because of a corrupt Multiprocessor System (MPS) table). You can use Device Manager to determine where the conflict is and disable the conflicting device. On the "General Properties" tab of the device, click "Troubleshoot" to start the troubleshooting wizard. Name: Broadcom 802.11g Network Adapter #21 Description: Broadcom 802.11g Network Adapter Class Guid: {4D36E972-E325-11CE-BFC1-08002BE10318} Manufacturer: Broadcom Service: BCM43XX Problem: : This device cannot find enough free resources that it can use. If you want to use this device, you will need to disable one of the other devices on this system. (Code12) Resolution: Two devices have been assigned the same input/output (I/O) ports, the same interrupt, or the same Direct Memory Access channel (either by the BIOS, the operating system, or a combination of the two). This error message can also appear if the BIOS did not allocate enough resources to the device (for example, if a universal serial bus (USB) controller does not get an interrupt from the BIOS because of a corrupt Multiprocessor System (MPS) table). You can use Device Manager to determine where the conflict is and disable the conflicting device. On the "General Properties" tab of the device, click "Troubleshoot" to start the troubleshooting wizard. Name: Broadcom 802.11g Network Adapter #22 Description: Broadcom 802.11g Network Adapter Class Guid: {4D36E972-E325-11CE-BFC1-08002BE10318} Manufacturer: Broadcom Service: BCM43XX Problem: : This device cannot find enough free resources that it can use. If you want to use this device, you will need to disable one of the other devices on this system. (Code12) Resolution: Two devices have been assigned the same input/output (I/O) ports, the same interrupt, or the same Direct Memory Access channel (either by the BIOS, the operating system, or a combination of the two). This error message can also appear if the BIOS did not allocate enough resources to the device (for example, if a universal serial bus (USB) controller does not get an interrupt from the BIOS because of a corrupt Multiprocessor System (MPS) table). You can use Device Manager to determine where the conflict is and disable the conflicting device. On the "General Properties" tab of the device, click "Troubleshoot" to start the troubleshooting wizard. Name: Broadcom 802.11g Network Adapter #23 Description: Broadcom 802.11g Network Adapter Class Guid: {4D36E972-E325-11CE-BFC1-08002BE10318} Manufacturer: Broadcom Service: BCM43XX Problem: : This device cannot find enough free resources that it can use. If you want to use this device, you will need to disable one of the other devices on this system. (Code12) Resolution: Two devices have been assigned the same input/output (I/O) ports, the same interrupt, or the same Direct Memory Access channel (either by the BIOS, the operating system, or a combination of the two). This error message can also appear if the BIOS did not allocate enough resources to the device (for example, if a universal serial bus (USB) controller does not get an interrupt from the BIOS because of a corrupt Multiprocessor System (MPS) table). You can use Device Manager to determine where the conflict is and disable the conflicting device. On the "General Properties" tab of the device, click "Troubleshoot" to start the troubleshooting wizard. Name: Broadcom 802.11g Network Adapter #24 Description: Broadcom 802.11g Network Adapter Class Guid: {4D36E972-E325-11CE-BFC1-08002BE10318} Manufacturer: Broadcom Service: BCM43XX Problem: : This device cannot find enough free resources that it can use. If you want to use this device, you will need to disable one of the other devices on this system. (Code12) Resolution: Two devices have been assigned the same input/output (I/O) ports, the same interrupt, or the same Direct Memory Access channel (either by the BIOS, the operating system, or a combination of the two). This error message can also appear if the BIOS did not allocate enough resources to the device (for example, if a universal serial bus (USB) controller does not get an interrupt from the BIOS because of a corrupt Multiprocessor System (MPS) table). You can use Device Manager to determine where the conflict is and disable the conflicting device. On the "General Properties" tab of the device, click "Troubleshoot" to start the troubleshooting wizard. Name: Broadcom 802.11g Network Adapter #25 Description: Broadcom 802.11g Network Adapter Class Guid: {4D36E972-E325-11CE-BFC1-08002BE10318} Manufacturer: Broadcom Service: BCM43XX Problem: : This device cannot find enough free resources that it can use. If you want to use this device, you will need to disable one of the other devices on this system. (Code12) Resolution: Two devices have been assigned the same input/output (I/O) ports, the same interrupt, or the same Direct Memory Access channel (either by the BIOS, the operating system, or a combination of the two). This error message can also appear if the BIOS did not allocate enough resources to the device (for example, if a universal serial bus (USB) controller does not get an interrupt from the BIOS because of a corrupt Multiprocessor System (MPS) table). You can use Device Manager to determine where the conflict is and disable the conflicting device. On the "General Properties" tab of the device, click "Troubleshoot" to start the troubleshooting wizard. Name: Broadcom 802.11g Network Adapter #26 Description: Broadcom 802.11g Network Adapter Class Guid: {4D36E972-E325-11CE-BFC1-08002BE10318} Manufacturer: Broadcom Service: BCM43XX Problem: : This device cannot find enough free resources that it can use. If you want to use this device, you will need to disable one of the other devices on this system. (Code12) Resolution: Two devices have been assigned the same input/output (I/O) ports, the same interrupt, or the same Direct Memory Access channel (either by the BIOS, the operating system, or a combination of the two). This error message can also appear if the BIOS did not allocate enough resources to the device (for example, if a universal serial bus (USB) controller does not get an interrupt from the BIOS because of a corrupt Multiprocessor System (MPS) table). You can use Device Manager to determine where the conflict is and disable the conflicting device. On the "General Properties" tab of the device, click "Troubleshoot" to start the troubleshooting wizard. Name: Broadcom 802.11g Network Adapter #27 Description: Broadcom 802.11g Network Adapter Class Guid: {4D36E972-E325-11CE-BFC1-08002BE10318} Manufacturer: Broadcom Service: BCM43XX Problem: : This device cannot find enough free resources that it can use. If you want to use this device, you will need to disable one of the other devices on this system. (Code12) Resolution: Two devices have been assigned the same input/output (I/O) ports, the same interrupt, or the same Direct Memory Access channel (either by the BIOS, the operating system, or a combination of the two). This error message can also appear if the BIOS did not allocate enough resources to the device (for example, if a universal serial bus (USB) controller does not get an interrupt from the BIOS because of a corrupt Multiprocessor System (MPS) table). You can use Device Manager to determine where the conflict is and disable the conflicting device. On the "General Properties" tab of the device, click "Troubleshoot" to start the troubleshooting wizard. Name: Broadcom 802.11g Network Adapter #28 Description: Broadcom 802.11g Network Adapter Class Guid: {4D36E972-E325-11CE-BFC1-08002BE10318} Manufacturer: Broadcom Service: BCM43XX Problem: : This device cannot find enough free resources that it can use. If you want to use this device, you will need to disable one of the other devices on this system. (Code12) Resolution: Two devices have been assigned the same input/output (I/O) ports, the same interrupt, or the same Direct Memory Access channel (either by the BIOS, the operating system, or a combination of the two). This error message can also appear if the BIOS did not allocate enough resources to the device (for example, if a universal serial bus (USB) controller does not get an interrupt from the BIOS because of a corrupt Multiprocessor System (MPS) table). You can use Device Manager to determine where the conflict is and disable the conflicting device. On the "General Properties" tab of the device, click "Troubleshoot" to start the troubleshooting wizard. Name: Broadcom 802.11g Network Adapter #29 Description: Broadcom 802.11g Network Adapter Class Guid: {4D36E972-E325-11CE-BFC1-08002BE10318} Manufacturer: Broadcom Service: BCM43XX Problem: : This device cannot find enough free resources that it can use. If you want to use this device, you will need to disable one of the other devices on this system. (Code12) Resolution: Two devices have been assigned the same input/output (I/O) ports, the same interrupt, or the same Direct Memory Access channel (either by the BIOS, the operating system, or a combination of the two). This error message can also appear if the BIOS did not allocate enough resources to the device (for example, if a universal serial bus (USB) controller does not get an interrupt from the BIOS because of a corrupt Multiprocessor System (MPS) table). You can use Device Manager to determine where the conflict is and disable the conflicting device. On the "General Properties" tab of the device, click "Troubleshoot" to start the troubleshooting wizard. Name: Broadcom 802.11g Network Adapter #30 Description: Broadcom 802.11g Network Adapter Class Guid: {4D36E972-E325-11CE-BFC1-08002BE10318} Manufacturer: Broadcom Service: BCM43XX Problem: : This device cannot find enough free resources that it can use. If you want to use this device, you will need to disable one of the other devices on this system. (Code12) Resolution: Two devices have been assigned the same input/output (I/O) ports, the same interrupt, or the same Direct Memory Access channel (either by the BIOS, the operating system, or a combination of the two). This error message can also appear if the BIOS did not allocate enough resources to the device (for example, if a universal serial bus (USB) controller does not get an interrupt from the BIOS because of a corrupt Multiprocessor System (MPS) table). You can use Device Manager to determine where the conflict is and disable the conflicting device. On the "General Properties" tab of the device, click "Troubleshoot" to start the troubleshooting wizard. Name: Broadcom 802.11g Network Adapter #31 Description: Broadcom 802.11g Network Adapter Class Guid: {4D36E972-E325-11CE-BFC1-08002BE10318} Manufacturer: Broadcom Service: BCM43XX Problem: : This device cannot find enough free resources that it can use. If you want to use this device, you will need to disable one of the other devices on this system. (Code12) Resolution: Two devices have been assigned the same input/output (I/O) ports, the same interrupt, or the same Direct Memory Access channel (either by the BIOS, the operating system, or a combination of the two). This error message can also appear if the BIOS did not allocate enough resources to the device (for example, if a universal serial bus (USB) controller does not get an interrupt from the BIOS because of a corrupt Multiprocessor System (MPS) table). You can use Device Manager to determine where the conflict is and disable the conflicting device. On the "General Properties" tab of the device, click "Troubleshoot" to start the troubleshooting wizard. ========================= Memory info: =================================== Percentage of memory in use: 20% Total physical RAM: 2046.42 MB Available physical RAM: 1616.7 MB Total Pagefile: 3939.39 MB Available Pagefile: 3673.1 MB Total Virtual: 2047.88 MB Available Virtual: 1971.3 MB ========================= Partitions: ===================================== 1 Drive c: () (Fixed) (Total:74.53 GB) (Free:66.09 GB) NTFS 3 Drive e: () (Removable) (Total:3.72 GB) (Free:3.62 GB) FAT32 ========================= Users: ======================================== User accounts for \\MUSIC-F0E908DA9 Administrator Guest HelpAssistant JC-DEVO SUPPORT_388945a0 **** End of log ****