Jump to content

Welcome to Geeks to Go - Register now for FREE

Need help with your computer or device? Want to learn new tech skills? You're in the right place!
Geeks to Go is a friendly community of tech experts who can solve any problem you have. Just create a free account and post your question. Our volunteers will reply quickly and guide you through the steps. Don't let tech troubles stop you. Join Geeks to Go now and get the support you need!

How it Works Create Account
Photo

computer won't boot past PCI Device Listing


  • Please log in to reply

#1
poppyal

poppyal

    Member

  • Member
  • PipPipPip
  • 161 posts
Hello! This is my first time here, so please bear with me if I goof.
When I turn on my system it only goes to the bottom of the screen that lists the PCI Devices. It then locks up and won't go any further.
Can anyone help with this? I usually understand computers pretty well, but this one has me stumped. Thanx.

I have since noticed that the floppy light and the hard drive light stays on.
I don't know what that means, but I know it's not right.

Edited by poppyal, 18 March 2006 - 07:53 PM.

  • 0

Advertisements


#2
Retired Tech

Retired Tech

    Retired Staff

  • Retired Staff
  • 20,563 posts
Boot the PC and keep tapping the delete key until you get set up, look for and load BIOS defaults / fail safe defaults, press F10 to save, type Y to confirm then press enter
  • 0

#3
poppyal

poppyal

    Member

  • Topic Starter
  • Member
  • PipPipPip
  • 161 posts

Boot the PC and keep tapping the delete key until you get set up, look for and load BIOS defaults / fail safe defaults, press F10 to save, type Y to confirm then press enter


Thanks for the reply. I've already tried your suggestion and it did not help. Thanx, again.
  • 0






Similar Topics

0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users

As Featured On:

Microsoft Yahoo BBC MSN PC Magazine Washington Post HP