Edited by Battery55, 08 May 2006 - 04:08 PM.
is the headphone jack going to produce the same quality as line-in?
Posted 08 May 2006 - 04:04 PM
Posted 08 May 2006 - 06:21 PM
8th May 2006
My line-in jack wont take the plug all the way in, it only goes in enough to give sound to the right speaker. I am hooking my 2.1 system with a subwoofer into my headphone jack, and I was wondering if I would get the same quality?
The Line IN Jack is for connecting a Tape Recorder or other Audio Sources It should be Light Blue Color Jack. If the Input Jack will not fully engage then it is probably for MONO and you probably will only have the Right Speaker Operation [??] - I would expect the MIC IN would be the Mono Jack [??]
Where are these Jacks located Front or Rear of PC [??] If you are using the Front Jacks There may be a wiring Problem Verify with your Manual [??] The Rear Jacks are Hard Wired from Factory while the Front Jacks are set at dealer -
Line In = Light Blue Jack
Line Out [Speaker] = Lime Green Jack
MIC = Pink Jack
Usually the Headset Jack is on CD Player or On a Speaker but could be included on a Front Panel Option I suppose [??]
Edited by Jack123, 09 May 2006 - 05:09 PM.
Posted 08 May 2006 - 09:09 PM
Posted 09 May 2006 - 05:45 PM
9th May 2006
I meant Line-out, I'm hooking speakers up to the headphones jack on my front panel as opposed to the lime green line-out. Will I have any change in quality?
That is a technical question Which requires a review of the technical specifications of
1- Audio Card
2- Speakers System
See Audio Links
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users