i hope that someone is able to help, as it does not look healthy at all.........
thank you
power loss and memory dump help!
Started by
audiostorm
, May 15 2006 04:47 PM
#1
Posted 15 May 2006 - 04:47 PM
audiostorm
-
- Member
-
- 1 posts
New Member
i hope that someone is able to help, as it does not look healthy at all.........
thank you
#2
Posted 15 May 2006 - 06:02 PM
Retired Tech
-
- Retired Staff
-
- 20,563 posts
Retired Staff
Items in blue which are underlined are clickable to give more information about the process
Click start then run, type prefetch then press enter, click edit then select all, right click any file then click delete, confirm delete
Click start, all programmes, accessories, system tools to run disc clean up, then from system tools, run disc defragmenter.
Click start then run, type sfc /scannow then press enter, you need the XP CD and Windows File Protection will show a blue onscreen progress bar, when the bar goes, reboot
If you do not have an XP CD you can borrow a same version as was originally installed XP CD, if you downloaded SP2 then you need an SP1 XP CD
Click start then run, type chkdsk /f /r then press enter, type Y to confirm for next boot, press enter then reboot.
Windows will appear to load normally then either the monitor will show progress or the screen will go blank, do not disturb this.
This will take an hour or so before it gets to the desktop.
Download and install Tune Up 2006 Trial
Run Tune Up Disc Clean Up
Run Tune Up Registry Clean Up
Click Optimize and Improve to run Reg Defrag, which will take a few minutes and need a reboot. You should disable the antivirus programme to run this and check it is running after the reboot
After the reboot, click optimize then system optimizer to optimize the computer, select computer with an internet connection from the drop down menu, this also requires a reboot
After the reboot, click optimize then system optimizer to accelerate downloads, select the speed just above your actual connection speed, this requires a reboot
After the reboot, click optimize then system optimizer to run system advisor
How to use Event Viewer to view and manage Event Logs in Windows XP
Event Viewer
In Windows XP, an event is any significant occurrence in the system or in a program that requires users to be notified, or an entry added to a log. The Event Log Service records application, security, and system events in Event Viewer. With the event logs in Event Viewer, you can obtain information about your hardware, software, and system components, and monitor security events on a local or remote computer. Event logs can help you identify and diagnose the source of current system problems, or help you predict potential system problems.
Event Log Types
A Windows XP-based computer records events in the following three logs:
Application log
The application log contains events logged by programs. For example, a database program may record a file error in the application log. Events that are written to the application log are determined by the developers of the software program.
Security log
The security log records events such as valid and invalid logon attempts, as well as events related to resource use, such as the creating, opening, or deleting of files. For example, when logon auditing is enabled, an event is recorded in the security log each time a user attempts to log on to the computer. You must be logged on as Administrator or as a member of the Administrators group in order to turn on, use, and specify which events are recorded in the security log.
System log
The system log contains events logged by Windows XP system components. For example, if a driver fails to load during startup, an event is recorded in the system log. Windows XP predetermines the events that are logged by system components.
How to View Event Logs
To open Event Viewer, follow these steps:
1. Click Start, and then click Control Panel. Click Performance and Maintenance, then click Administrative Tools, and then double-click Computer Management. Or, open the MMC containing the Event Viewer snap-in.
2. In the console tree, click Event Viewer.
The Application, Security, and System logs are displayed in the Event Viewer window.
How to View Event Details
To view the details of an event, follow these steps:
1. Click Start, and then click Control Panel. Click Performance and Maintenance, then click Administrative Tools, and then double-click Computer Management. Or, open the MMC containing the Event Viewer snap-in.
2. In the console tree, expand Event Viewer, and then click the log that contains the event that you want to view.
3. In the details pane, double-click the event that you want to view.
The Event Properties dialog box containing header information and a description of the event is displayed.
To copy the details of the event, click the Copy button, then open a new document in the program in which you want to paste the event (for example, Microsoft Word), and then click Paste on the Edit menu.
To view the description of the previous or next event, click the UP ARROW or DOWN ARROW.
How to Interpret an Event
Each log entry is classified by type, and contains header information, and a description of the event.
Event Header
The event header contains the following information about the event:
Date - The date the event occurred.
Time - The time the event occurred.
User - The user name of the user that was logged on when the event occurred.
Computer - The name of the computer where the event occurred.
Event ID - An event number that identifies the event type. The Event ID can be used by product support representatives to help understand what occurred in the system.
Source - The source of the event. This can be the name of a program, a system component, or an individual component of a large program.
Type - The type of event. This can be one of the following five types: Error, Warning, Information, Success Audit, or Failure Audit.
Category - A classification of the event by the event source. This is primarily used in the security log.
Event Types
The description of each event that is logged depends on the type of event. Each event in a log can be classified into one of the following types:
Information
An event that describes the successful operation of a task, such as an application, driver, or service. For example, an Information event is logged when a network driver loads successfully.
Warning
An event that is not necessarily significant, however, may indicate the possible occurrence of a future problem. For example, a Warning message is logged when disk space starts to run low.
Error
An event that describes a significant problem, such as the failure of a critical task. Error events may involve data loss or loss of functionality. For example, an Error event is logged if a service fails to load during startup.
Success Audit (Security log)
An event that describes the successful completion of an audited security event. For example, a Success Audit event is logged when a user logs on to the computer.
Failure Audit (Security log)
An event that describes an audited security event that did not complete successfully. For example, a Failure Audit may be logged when a user cannot access a network drive.
How to Find Events in a Log
The default view of event logs is to list all its entries. If you want to find a specific event, or view a subset of events, you can either search the log, or you can apply a filter to the log data.
How to Search for a Specific Log Event
To search for a specific log event, follow these steps:
1. Click Start, and then click Control Panel. Click Performance and Maintenance, then click Administrative Tools, and then double-click Computer Management. Or, open the MMC containing the Event Viewer snap-in.
2. In the console tree, expand Event Viewer, and then click the log that contains the event that you want to view.
3. On the View menu, click Find.
4. Specify the options for the event that you want to view in the Find dialog box, and then click Find Next.
The event that matches your search criteria is highlighted in the details pane. Click Find Next to locate the next occurrence of an event as defined by your search criteria.
How to Filter Log Events
To filter log events, follow these steps:
1. Click Start, and then click Control Panel. Click Performance and Maintenance, then click Administrative Tools, and then double-click Computer Management. Or, open the MMC containing the Event Viewer snap-in.
2. In the console tree, expand Event Viewer, and then click the log that contains the event that you want to view.
3. On the View menu, click Filter.
4. Click the Filter tab (if it is not already selected).
5. Specify the filter options that you want, and then click OK.
Only events that match your filter criteria are displayed in the details pane.
To return the view to display all log entries, click Filter on the View menu, and then click Restore Defaults.
How to Manage Log Contents
By default, the initial maximum of size of a log is set to 512 KB, and when this size is reached, new events overwrite older events as needed. Depending on your requirements, you can change these settings, or clear a log of its contents.
How to Set Log Size and Overwrite Options
To specify log size and overwrite options, follow these steps:
1. Click Start, and then click Control Panel. Click Performance and Maintenance, then click Administrative Tools, and then double-click Computer Management. Or, open the MMC containing the Event Viewer snap-in.
2. In the console tree, expand Event Viewer, and then right-click the log in which you want to set size and overwrite options.
3. Under Log size, type the size that you want in the Maximum log size box.
4. Under When maximum log size is reached, click the overwrite option that you want.
5. If you want to clear the log contents, click Clear Log.
6. Click OK.
How to Archive a Log
If you want to save your log data, you can archive event logs in any of the following formats:
Log-file format (.evt)
Text-file format (.txt)
Comma-delimited text-file format (.csv)
To archive a log, follow these steps:
1. Click Start, and then click Control Panel. Click Performance and Maintenance, then click Administrative Tools, and then double-click Computer Management. Or, open the MMC containing the Event Viewer snap-in.
2. In the console tree, expand Event Viewer, and then right-click the log in which you want to archive, and then click Save Log File As.
3. Specify a file name and location where you want to save the file. In the Save as type box, click the format that you want, and then click Save.
The log file is saved in the format that you specified.
REFERENCES
For more information about a specific event or error, visit the following Microsoft Web site:
http://www.microsoft...entserrors.mspx
For additional information about how to use Event Viewer, see Event Viewer Help. (In the Event Viewer snap-in or Computer Management window, on the Action menu, click Help).
APPLIES TO
Microsoft Windows XP Home Edition
Microsoft Windows XP Professional
Click start then run, type prefetch then press enter, click edit then select all, right click any file then click delete, confirm delete
Click start, all programmes, accessories, system tools to run disc clean up, then from system tools, run disc defragmenter.
Click start then run, type sfc /scannow then press enter, you need the XP CD and Windows File Protection will show a blue onscreen progress bar, when the bar goes, reboot
If you do not have an XP CD you can borrow a same version as was originally installed XP CD, if you downloaded SP2 then you need an SP1 XP CD
Click start then run, type chkdsk /f /r then press enter, type Y to confirm for next boot, press enter then reboot.
Windows will appear to load normally then either the monitor will show progress or the screen will go blank, do not disturb this.
This will take an hour or so before it gets to the desktop.
Download and install Tune Up 2006 Trial
Run Tune Up Disc Clean Up
Run Tune Up Registry Clean Up
Click Optimize and Improve to run Reg Defrag, which will take a few minutes and need a reboot. You should disable the antivirus programme to run this and check it is running after the reboot
After the reboot, click optimize then system optimizer to optimize the computer, select computer with an internet connection from the drop down menu, this also requires a reboot
After the reboot, click optimize then system optimizer to accelerate downloads, select the speed just above your actual connection speed, this requires a reboot
After the reboot, click optimize then system optimizer to run system advisor
How to use Event Viewer to view and manage Event Logs in Windows XP
Event Viewer
In Windows XP, an event is any significant occurrence in the system or in a program that requires users to be notified, or an entry added to a log. The Event Log Service records application, security, and system events in Event Viewer. With the event logs in Event Viewer, you can obtain information about your hardware, software, and system components, and monitor security events on a local or remote computer. Event logs can help you identify and diagnose the source of current system problems, or help you predict potential system problems.
Event Log Types
A Windows XP-based computer records events in the following three logs:
Application log
The application log contains events logged by programs. For example, a database program may record a file error in the application log. Events that are written to the application log are determined by the developers of the software program.
Security log
The security log records events such as valid and invalid logon attempts, as well as events related to resource use, such as the creating, opening, or deleting of files. For example, when logon auditing is enabled, an event is recorded in the security log each time a user attempts to log on to the computer. You must be logged on as Administrator or as a member of the Administrators group in order to turn on, use, and specify which events are recorded in the security log.
System log
The system log contains events logged by Windows XP system components. For example, if a driver fails to load during startup, an event is recorded in the system log. Windows XP predetermines the events that are logged by system components.
How to View Event Logs
To open Event Viewer, follow these steps:
1. Click Start, and then click Control Panel. Click Performance and Maintenance, then click Administrative Tools, and then double-click Computer Management. Or, open the MMC containing the Event Viewer snap-in.
2. In the console tree, click Event Viewer.
The Application, Security, and System logs are displayed in the Event Viewer window.
How to View Event Details
To view the details of an event, follow these steps:
1. Click Start, and then click Control Panel. Click Performance and Maintenance, then click Administrative Tools, and then double-click Computer Management. Or, open the MMC containing the Event Viewer snap-in.
2. In the console tree, expand Event Viewer, and then click the log that contains the event that you want to view.
3. In the details pane, double-click the event that you want to view.
The Event Properties dialog box containing header information and a description of the event is displayed.
To copy the details of the event, click the Copy button, then open a new document in the program in which you want to paste the event (for example, Microsoft Word), and then click Paste on the Edit menu.
To view the description of the previous or next event, click the UP ARROW or DOWN ARROW.
How to Interpret an Event
Each log entry is classified by type, and contains header information, and a description of the event.
Event Header
The event header contains the following information about the event:
Date - The date the event occurred.
Time - The time the event occurred.
User - The user name of the user that was logged on when the event occurred.
Computer - The name of the computer where the event occurred.
Event ID - An event number that identifies the event type. The Event ID can be used by product support representatives to help understand what occurred in the system.
Source - The source of the event. This can be the name of a program, a system component, or an individual component of a large program.
Type - The type of event. This can be one of the following five types: Error, Warning, Information, Success Audit, or Failure Audit.
Category - A classification of the event by the event source. This is primarily used in the security log.
Event Types
The description of each event that is logged depends on the type of event. Each event in a log can be classified into one of the following types:
Information
An event that describes the successful operation of a task, such as an application, driver, or service. For example, an Information event is logged when a network driver loads successfully.
Warning
An event that is not necessarily significant, however, may indicate the possible occurrence of a future problem. For example, a Warning message is logged when disk space starts to run low.
Error
An event that describes a significant problem, such as the failure of a critical task. Error events may involve data loss or loss of functionality. For example, an Error event is logged if a service fails to load during startup.
Success Audit (Security log)
An event that describes the successful completion of an audited security event. For example, a Success Audit event is logged when a user logs on to the computer.
Failure Audit (Security log)
An event that describes an audited security event that did not complete successfully. For example, a Failure Audit may be logged when a user cannot access a network drive.
How to Find Events in a Log
The default view of event logs is to list all its entries. If you want to find a specific event, or view a subset of events, you can either search the log, or you can apply a filter to the log data.
How to Search for a Specific Log Event
To search for a specific log event, follow these steps:
1. Click Start, and then click Control Panel. Click Performance and Maintenance, then click Administrative Tools, and then double-click Computer Management. Or, open the MMC containing the Event Viewer snap-in.
2. In the console tree, expand Event Viewer, and then click the log that contains the event that you want to view.
3. On the View menu, click Find.
4. Specify the options for the event that you want to view in the Find dialog box, and then click Find Next.
The event that matches your search criteria is highlighted in the details pane. Click Find Next to locate the next occurrence of an event as defined by your search criteria.
How to Filter Log Events
To filter log events, follow these steps:
1. Click Start, and then click Control Panel. Click Performance and Maintenance, then click Administrative Tools, and then double-click Computer Management. Or, open the MMC containing the Event Viewer snap-in.
2. In the console tree, expand Event Viewer, and then click the log that contains the event that you want to view.
3. On the View menu, click Filter.
4. Click the Filter tab (if it is not already selected).
5. Specify the filter options that you want, and then click OK.
Only events that match your filter criteria are displayed in the details pane.
To return the view to display all log entries, click Filter on the View menu, and then click Restore Defaults.
How to Manage Log Contents
By default, the initial maximum of size of a log is set to 512 KB, and when this size is reached, new events overwrite older events as needed. Depending on your requirements, you can change these settings, or clear a log of its contents.
How to Set Log Size and Overwrite Options
To specify log size and overwrite options, follow these steps:
1. Click Start, and then click Control Panel. Click Performance and Maintenance, then click Administrative Tools, and then double-click Computer Management. Or, open the MMC containing the Event Viewer snap-in.
2. In the console tree, expand Event Viewer, and then right-click the log in which you want to set size and overwrite options.
3. Under Log size, type the size that you want in the Maximum log size box.
4. Under When maximum log size is reached, click the overwrite option that you want.
5. If you want to clear the log contents, click Clear Log.
6. Click OK.
How to Archive a Log
If you want to save your log data, you can archive event logs in any of the following formats:
Log-file format (.evt)
Text-file format (.txt)
Comma-delimited text-file format (.csv)
To archive a log, follow these steps:
1. Click Start, and then click Control Panel. Click Performance and Maintenance, then click Administrative Tools, and then double-click Computer Management. Or, open the MMC containing the Event Viewer snap-in.
2. In the console tree, expand Event Viewer, and then right-click the log in which you want to archive, and then click Save Log File As.
3. Specify a file name and location where you want to save the file. In the Save as type box, click the format that you want, and then click Save.
The log file is saved in the format that you specified.
REFERENCES
For more information about a specific event or error, visit the following Microsoft Web site:
http://www.microsoft...entserrors.mspx
For additional information about how to use Event Viewer, see Event Viewer Help. (In the Event Viewer snap-in or Computer Management window, on the Action menu, click Help).
APPLIES TO
Microsoft Windows XP Home Edition
Microsoft Windows XP Professional
Similar Topics
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users
As Featured On:
Sign In
Create Account
