[stevecraig12]

i was given a computer, and now i want to go thru and make sure all the bios settings are correct, and enable bus mastering, but this motherboard doesn't say what to press, it just shows a compaq sign. i want to also add a dvd-rom, a Matshita DVD-Rom SR-8583. I am going to try to change the jumper settings on the optical drives, but i still need to know how to get the bios settings.

thanks


Motherboard Website and Specs: http://www.fic.com.t...amp;model_id=44

[Advertisements]

Compaq boards are usually press F10 to get into system setup, or just alternate between F1, F2 and DEL. These bioses are often non-standard so don't expect to see an option for bus mastering.

[Neil Jones]

Compaq boards are usually press F10 to get into system setup, or just alternate between F1, F2 and DEL. These bioses are often non-standard so don't expect to see an option for bus mastering.

[stevecraig12]

thank you...i finally figured that out...
i have a usb keyboard, so it wasnt working before the computer turned on, so when i switched over to my ps2 keyboard, it worked

thanks again
and i didnt find a bus mastering feature