I `inherited' a Pentium 4 Intel WinXP computer that, although it will recognize a 1/2 GBFujiFilm Flash Drive, will not recognize a 1 GBLexar Jump Drive (JDSP1GB-04-500C).
I have called Lexar several times about this (an email to Support brought no response). Their suggestions were:
1] Go to Device Manager. Uninstall the "Unknown Device", unplug the Jumpdrive and restart the system and plug it back in.
2] Assign a Drive Letter: Go to Control Panel, Disk Management, Assign a new drive letter, find the device and make the assignment
Neither solution worked, followed as I described them here. It did not even show up in"Assign a new drive letter."
The basic info about the computer is (mostly from Everest Home edition):
SYSTEM:
Computer P4 1.4 GHZ 256 MEGS RAM 40 GIG HD
Operating System Microsoft Windows XP Professional 5.1.2600 (WinXP Retail)
OS Service Pack Service Pack 1
[NOTE: BEING OFFLINE FOR A LONG TIME THE WINDOWS UPDATES ARE FAR BEHIND]
DirectX 4.09.00.0902 (DirectX 9.0b)
Motherboard:
CPU Type Intel Pentium 4, 1400 MHz (14 x 100)
Motherboard Name Intel Garibaldi D850GB (5 PCI, 1 AGP, 4 RIMM)
Motherboard Chipset Intel Tehama i850
System Memory 256 MB (PC800 RDRAM)
BIOS Type AMI (10/08/01)
Display:
Video Adapter Xpert 2000 (32 MB)
3D Accelerator ATI Rage128 4x
Storage:
IDE Controller Intel® 82801BA Ultra ATA Controller
Floppy Drive Floppy disk drive
Disk Drive ST340824A (40 GB, 7200 RPM, Ultra-ATA/100)
Disk Drive Fujifilm USB Drive USB Device (47 MB, USB)
Optical Drive SONY CDU5211 (52x CD-ROM)
SMART Hard Disks Status OK
Partitions:
C: (NTFS) 34161 MB (28738 MB free)
D: (NTFS) 4000 MB (3977 MB free)
Total Size 37.3 GB (31.9 GB free)
Network:
Network Adapter 3Com EtherLink 10/100 PCI For Complete PC Management NIC
(3C905C-TX)
Peripherals (selected):
USB1 Controller Intel 82801BA ICH2 - USB Controller 1 [B-1]
USB1 Controller Intel 82801BA ICH2 - USB Controller 2 [B-1]
STARTUP (from MSconfig):
Item..................Command..........Location
atiptixx...............atiptixx.exe
..................................................HKLM\SOFTWARE\Microsoft\CurrentVersion\Run
TCAUDIAG..........TCAUDIAG -off
..................................................HKLM\SOFTWARE\Microsoft\CurrentVersion\Run
vptray..................C:\PROGRA~1\SYMANT~1\vptray
..................................................HKLM\SOFTWARE\Microsoft\CurrentVersion\Run
msmsgs..............."C:\Program files\messenger\msmsgs,exe" /background
..................................................HKCU\SOFTWARE\Microsoft\CurrentVersion\Run
ctfmon..................C:\WINDOWS\System32\ctfmon.exe
..................................................HKCU\SOFTWARE\Microsoft\CurrentVersion\Run
{Aquarius Soft C:\PROGRA~1\AQUAARI~1\PCSHUT~1\assdtray.exe
PC Shutdown Tray Icon................Common Startup}
PROCESSES:
assdtray.exe......C:\Program Files\Aquarius Soft\PC Shutdown\assdtray.exe
atiptaxx.exe......C:\WINDOWS\System32\atiptaxx.exe
csrss.exe..........C:\WINDOWS\system32\csrss.exe
ctfmon.exe........C:\WINDOWS\System32\ctfmon.exe
DefWatch.exe.....C:\PROGRA~1\SYMANT~1\SYMANT~1\DefWatch.exe
Explorer.EXE......C:\WINDOWS\Explorer.EXE
lsass.exe..........C:\WINDOWS\system32\lsass.exe
mdm.exe..........C:\Program Files\Common Files\Microsoft Shared\VS7Debug\mdm.exe
msmsgs.exe.......C:\Program Files\Messenger\msmsgs.exe
PrcView.exe.......C:\TOOLS\Process Viewer\PrcView.exe
Rtvscan.exe........C:\PROGRA~1\SYMANT~1\SYMANT~1\Rtvscan.exe
services.exe........C:\WINDOWS\system32\services.exe
smss.exe...........C:\WINDOWS\System32\smss.exe
spoolsv.exe........C:\WINDOWS\system32\spoolsv.exe
svchost.exe........C:\WINDOWS\system32\svchost.exe
svchost.exe........C:\WINDOWS\System32\svchost.exe
svchost.exe........C:\WINDOWS\System32\svchost.exe
svchost.exe........C:\WINDOWS\System32\svchost.exe
svchost.exe........C:\Program Files\Aquarius Soft\PC Shutdown\svchost.exe
vptray.exe..........C:\PROGRA~1\SYMANT~1\SYMANT~1\vptray.exe
winlogon.exe.......C:\WINDOWS\system32\winlogon.exe
It was connected through a network. I will reconnect it through a dialup or ADSL light.
The info about the problem and the computer's USB ports and handling of the Lexar and the FujiFilm, as written to Lexar:
=========================================================
Dear Lexar Support,
I have a 1 GB Lexar JumpDrive (JDSP1GB-04-500C). I have recently acquired a Pentium IV, 1.5FHz computer with Windows XP Professional version 2002. I have used the Lexar in every computer (all WIN 2000 or WIN XP) I have come across without a problem. This computer only recognizes it as an "Unknown Device" on a USB port.
The computer has two USB ports.
Device Manager Details:
____________________________________________________________
The computer's Device Manager reports two USB host Controllers:
Device: Intel(rl 82801BA/BAM USB Universal Host Controller - 2442
using I/O range EF40-EF5F and IRQ 19. No conflicts reported.
Device: Intel(rl 82801BA/BAM USB Universal Host Controller - 2444
using I/O Range EF80-EF9F and IRQ 23. No conflicts reported.
They both use the drivers:
Windows\system32\drivers\usbhub.sys version 5.1.2600.1243 (xpsp2.030702-2125)
Windows\system32\drivers\usbport.sys version 5.1.2600.1243 (xpsp2.030702-2125)
Windows\system32\drivers\usbuhci.sys version 5.1.2600.1243 (xpsp2.030702-2125)
Windows\system32\drivers\usbui.dll version 5.1.2600.0 (xpclent.010817-1148)
It reports two USB Root Hubs. Under USB Root Hub Properties...
It reports these drivers:
Windows\system32\drivers\mlnxfltr.sys version 5.1.2600.0 by WinDDK
Windows\system32\drivers\usbd.sys version 5.1.2600.0 (XPXlient.010817-1148)
Windows\system32\drivers\usbhub.sys version 5.1.2600.1243 (xpsp2.030702-2125)
It reports the Lexar as an:
Unknown Device
with Power Required as 0 mA.
It reports (for example) another USB Flash Drive (a Fuji 500 MB) as a:
USB Mass Storage Device
with Power Required as 178mA.
This Fuji is reported as using the driver:
Windows\system32\drivers\USBSTOR.SYS version 5.1.2600.1106 (xpsp1.020828-1920)
===========================================================
Thank you for any insight or help.
Regards,
SS