[wannabe1]

Spacecowboy is very good...

I use WAP and it seems to be very effective.

If you get a chance, check the jumpers on the cd-rom drive and see if it's set to master or slave. No rush...as long as the machine is running properly, we'll just keep plugging away at the pause issue...

[Advertisements]

Spacecowboy is very good...

I use WAP and it seems to be very effective.

If you get a chance, check the jumpers on the cd-rom drive and see if it's set to master or slave. No rush...as long as the machine is running properly, we'll just keep plugging away at the pause issue...

Hi wannabe1
Thanks for that I'll check the jumpers in the morning after the kids go to school Thanks again for your help your the best I hope you got to relax a little this weekend.


Cheyenne 09

Edited by cheyenne 09, 20 August 2006 - 05:02 PM.

[cheyenne 09]

Spacecowboy is very good...

I use WAP and it seems to be very effective.

If you get a chance, check the jumpers on the cd-rom drive and see if it's set to master or slave. No rush...as long as the machine is running properly, we'll just keep plugging away at the pause issue...

Hi wannabe1
Thanks for that I'll check the jumpers in the morning after the kids go to school Thanks again for your help your the best I hope you got to relax a little this weekend.


Cheyenne 09

Edited by cheyenne 09, 20 August 2006 - 05:02 PM.

[cheyenne 09]

Hi wannabe1
I had a look at the back of the CD-ROM it is set up like this. if I stand at the back of it on my left is three sockets the first two are empty the third has three pins the first one has the jumper the other two are empty and there are two larger sockets the first has the ribbon in it and next socket has the power cable that's what you wanted does this help let me know. Thanks again your the Greatest


Cheyenne 09

Edited by cheyenne 09, 24 August 2006 - 07:37 AM.

[wannabe1]

Sounds like it's set to cable select. Try moving the jumper to the far right pins...these should be the master settings. The drive IS connected to the end connector on the cable, right?

[cheyenne 09]

Hi wannabe1
I have moved the jumper from left to right and just above on the right it has the letters m,a so this where I plugged the jumper in. so is there anything else that i can do.Thanks again

Cheyenne 09

[wannabe1]

I take it you still have the delay in booting?

[cheyenne 09]

I take it you still have the delay in booting?

Hi wannabe1
that's a yes thanks again

Cheyenne 09

[cheyenne 09]

Hi wannabe1
I still have my pausing problem on the dell screen. I haven't been logged in here at the same time as you for a little while anyway I hope alls well with you and your family. Thanks again for all your help your the greatest


Cheyenne 09