[64boyzz]

HERE IS THE PROBLEM.

WHEN I FIRST INSTALL THE 2 CARDS IT WORK PREFECTLY, PLAY GAMES FINE . AFTER I SHUT IT DOWN FOR A WHILE AND TURN IT BACK ON IT WONT LOAD IN TO WINDOW. THE DE-BUG PORT SHOW 6D WHICH I LOOK IT UP ON THE MANNUAL BOARD BOOK AND IT SAY RERESERVED. I CLEAR THE CMOS AND IT WORK LOAD ME INTO WINDOW AND I WAS ALL HAPPY, BUT THE SAME THING HAPPEN WHEN I SHUT DOWN THE COMPUTER. SO I TRY TO CLEAR IT AGAIN AND THIS TIME IT DIDNT WORK. I TOOK THE SECOND CARD OUT AND IT'S THE SAME WONT LOAD INTO WINDOW. I'M STUCK ON THE EVGA LOGO WHEN I START MY COMPUTER.

HERE IS MY RIG:
EVGA NFORCE4 MOTHERBOARD, MODELS 133-K8-NF41-XX
133-K8-NF43-XX
AMD OPTERON 165-1.8 OC 2.6
1GHZ MEMORY RAM
2X 6800XT 128MB


PLEASE HELP ME!!!

[Advertisements]

HERE IS THE PROBLEM.

WHEN I FIRST INSTALL THE 2 CARDS IT WORK PREFECTLY, PLAY GAMES FINE . AFTER I SHUT IT DOWN FOR A WHILE AND TURN IT BACK ON IT WONT LOAD IN TO WINDOW. THE DE-BUG PORT SHOW 6D WHICH I LOOK IT UP ON THE MANNUAL BOARD BOOK AND IT SAY RERESERVED. I CLEAR THE CMOS AND IT WORK LOAD ME INTO WINDOW AND I WAS ALL HAPPY, BUT THE SAME THING HAPPEN WHEN I SHUT DOWN THE COMPUTER. SO I TRY TO CLEAR IT AGAIN AND THIS TIME IT DIDNT WORK. I TOOK THE SECOND CARD OUT AND IT'S THE SAME WONT LOAD INTO WINDOW. I'M STUCK ON THE EVGA LOGO WHEN I START MY COMPUTER.

HERE IS MY RIG:
EVGA NFORCE4 MOTHERBOARD, MODELS 133-K8-NF41-XX
133-K8-NF43-XX
AMD OPTERON 165-1.8 OC 2.6
1GHZ MEMORY RAM
2X 6800XT 128MB


PLEASE HELP ME!!!

Have you updated the motherboards bios yet?? Sometimes the shipped bios can be buggy and its a good idea to do a bios update from the motherboard manufacturers website.

What kind of Powersupply do you have?

[jrm20]

HERE IS THE PROBLEM.

WHEN I FIRST INSTALL THE 2 CARDS IT WORK PREFECTLY, PLAY GAMES FINE . AFTER I SHUT IT DOWN FOR A WHILE AND TURN IT BACK ON IT WONT LOAD IN TO WINDOW. THE DE-BUG PORT SHOW 6D WHICH I LOOK IT UP ON THE MANNUAL BOARD BOOK AND IT SAY RERESERVED. I CLEAR THE CMOS AND IT WORK LOAD ME INTO WINDOW AND I WAS ALL HAPPY, BUT THE SAME THING HAPPEN WHEN I SHUT DOWN THE COMPUTER. SO I TRY TO CLEAR IT AGAIN AND THIS TIME IT DIDNT WORK. I TOOK THE SECOND CARD OUT AND IT'S THE SAME WONT LOAD INTO WINDOW. I'M STUCK ON THE EVGA LOGO WHEN I START MY COMPUTER.

HERE IS MY RIG:
EVGA NFORCE4 MOTHERBOARD, MODELS 133-K8-NF41-XX
133-K8-NF43-XX
AMD OPTERON 165-1.8 OC 2.6
1GHZ MEMORY RAM
2X 6800XT 128MB


PLEASE HELP ME!!!

Have you updated the motherboards bios yet?? Sometimes the shipped bios can be buggy and its a good idea to do a bios update from the motherboard manufacturers website.

What kind of Powersupply do you have?

[64boyzz]

450 watt come with my Raidmax gaming case.

[64boyzz]

i cant even update bios cause i cant log into window now. is the motherboard causing this problem?

[jrm20]

450 watt come with my Raidmax gaming case.

The thing is that the cheap raidmax cases have low voltage 12volt rails on the included power supplies. Im hoping this isnt your problem.

Just because a powersupply says its 450watts doesnt mean its actually 450 watts. Only the expensive or quality brands called true power powersupplies actually put out what they say or close to it. The raidmax dont put out what they list hopefully its not the problem but if the bios doesnt fix the problem it definately sounds like a powersupply issue.


Can you try getting into the bios by pressing Delete right after you power on the system.

Then go into pc health status and look at the voltage levels and post back all of the voltages.

Edited by jrm20, 19 November 2006 - 08:06 PM.

[64boyzz]

The pc seen to work fine the first time in sli, but now even running only 1 video card it wont load into window. before i run in sli i use to run only 1 6800xt and it work well and now it wont.

[64boyzz]

i can only get into my bois after the EVGA logo and it wont pass that logo so i cant chack it.

[64boyzz]

well i found a list of stuff on the side pf the psu

DC output current: +3.3v +5v -5v -12v +12vb
10A/5A: 28.0A 34.0A 21.0A 0.5A 0.8A 2.0A
Total=450w

is this it?

[jrm20]

well i found a list of stuff on the side pf the psu

DC output current: +3.3v +5v -5v -12v +12vb
10A/5A: 28.0A 34.0A 21.0A 0.5A 0.8A 2.0A
Total=450w

is this it?

It doesnt matter what is posted on the side of the powersupply as I said before.. I need to know the voltages through the bios atleast to see if you got ahold of a bad powersupply.

[64boyzz]

ok wait up i'll go mess my pc to see if i cant log into the bios.

[64boyzz]

nope, no luck. sli screw my pc up. any other ideas to help me?

[Kurenai]

I don't think SLI had anything to do with screwing up your PC. I think jrm20 is right about it being a PSU issue. Go ahead and remove all video cards from your system, and see what kind of errors the board throws at you.
If it gives you a no video cards error, then put one card in, see if it will POST. If not, try the other card. Try another power supply, if you can get your hands on one.

"The Ninja 918 Gaming Case from Raidmax is a gamer elitist’s dream. It’s sleek ninja styling creates the perfect balance of dangerous good looks and ..."
Never trust a manufacturer who uses the words "sleek ninja styling" to describe a computer case.

Edited by Kurenai, 20 November 2006 - 12:07 AM.

[64boyzz]

hey thank a lot!!
it is the pus that causing all this. i remove 2 fans with and it work. Load me into window perfectly. so tell which pus should i buy that will supprt sli?

[64boyzz]

hey there another problem. It's causing my game to run slow when i set cod2 to max setting. Does the 2 6800xt support cod2 at max setting? and it froze when i set Need 4 Speed at high resolution?

[64boyzz]

Does this RAIDMAX RX-630A ATX12V/ EPS12V 630W Power Supply 115/230 V support sil?