Edited by nettoon1991, 18 January 2007 - 11:01 PM.
getting blue screened
Posted 18 January 2007 - 11:01 PM
Posted 18 January 2007 - 11:21 PM
it should show stop error
start backing up your important stuff
bliue screen is merciless
have your xp cd with product key
borrow one if you have to
Posted 20 January 2007 - 02:34 AM
then after tell u bla bla if this is your first time bla bla...
stop: 0x000000d1 (0xbf998ad8, 0x000000ff, 0x00000001, 0xf9521750)
Win32k - sys - address bf998ad8
Base at BF800000, Date stamp 43446a58
anything you can do or do i need to reinstall or repair? i dont have a disk or anything so i dont know what i can do
Posted 20 January 2007 - 06:12 AM
Open System Properties via Start > Control Panel > Performance and Maintenance > System
[ System Properties may also be opened using the WinKey+Pause key combination ]
Select the Advanced tab and then click Settings in the Startup and Recovery section
In System Failure section, clear the checkbox next to Automatically Restart
Click OK and OK to exit.
You may get am error using the control panel method if you have your pagefile running from a different drive other than the "C" drive.
The system attempted to access pageable memory using a kernel process IRQL that was too high. The most typical cause is a bad device driver (one that uses improper addresses). It can also be caused by caused by faulty or mismatched RAM, or a damaged pagefile.
You need to think back and see if you remember if you may have changed a driver, added a new program, or some other kind of event that may be causing this to happen. If your system is getting hot it may cause this problem also. Download speedfan and see what your temps usually run at. I have even had this problem caused by low 12 volt line voltage. Speedfan also shows what your system voltages are.
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users