That was Thursday, since then the following has happened, "a problem has been detected and windows has been shut down to prevent damage to your computer. A process or thread crucial to system operation has unexpectedly exited or been terminated.
If this is the 1st time you've seen this stop error screen, restart your computer. If this screen appears again, follow these steps.
Check to make sure any new HW or SW is properly installed. If this is a new installation, ask your HW or SW manufacturer for any windows updates you might need.
If problem continues, disable any new HW or SW. Disable bios memory options such as shadowing or caching. If you need to use safe mode to remove or disable components, restart your computer, press f8 to select advance startup options and then slect safe mode."
Technical info Stop: 0x000000f4 (0x00000003, 0x8218d530, 0x8218d6a4, 0x805d1140)
Should I do as it says to do or can I wait for more tech help from the forum on what could be causing this issue? Can I please get some help with this issue from more experienced people who may have dealt with this problem before? I would greatly appreciate it.
I just booted my PC to get back to the desktop. I then left the room for a half hour and came back to the following message without touching my pc, ""cliet MAC addr: 00 17 76 5a ed dd guid: 2f43329b cea3 11da9943 0012febb946pxe-e53: no boot filename received.
PXe-m0f: exiting intel boot agent. No bootable device - insert boot disk and press any key"
I did that and I came back with the same error so I booted pc back to normal."
Now today, I just got the following error"Here's the info ""a problem has been detected and windows has been shut down to prevent damage to your computer. A process or thread crucial to system operation has unexpectedly exited or been terminated.
If this is the 1st time you've seen this stop error screen, restart your computer. If this screen appears again, follow these steps.
Check to make sure any new HW or SW is properly installed. If this is a new installation, ask your HW or SW manufacturer for any windows updates you might need.
If problem continues, disable any new HW or SW. Disable bios memory options such as shadowing or caching. If you need to use safe mode to remove or disable components, restart your computer, press f8 to select advance startup options and then slect safe mode."
Technical info Stop: 0x0000007a (0xc07c1720, 0x0000000E, 0xf82e4384, 0x1c5fb860)
Should I do as it says to do or can I wait for more tech help from the forum on what could be causing this issue? Can I please get some help with this issue from more experienced people who may have dealt with this problem before? I would greatly appreciate it.
In between my last BSOD's I have completely re-installed windows XP. If any of you guys have any suspicions would you say this is OS or HW related, please?
Please help me out on what is causing this. I appreciate any help.