[AnthonyJ]

alright, i got my ecs board. im running my socket 478 1.8ghz celeron at 2008mhz, i have the fsb set at 111 with core voltage at +3%. i can take fsb up to 118 at +5% but after that fsb no display. aparently i cant change multiplier as it is stuck at 18x, no matter what i set it at. under load my pc is staying under 37c, anyway to get more outta this cpu?

also im not letting the ram's speed over the defualt 133. ratio is at 5:6

Edited by AnthonyJ, 19 February 2007 - 03:07 PM.

[Advertisements]

also im overclocking in bios not a program

[AnthonyJ]

also im overclocking in bios not a program

[jrm20]

alright, i got my ecs board. im running my socket 478 1.8ghz celeron at 2008mhz, i have the fsb set at 111 with core voltage at +3%. i can take fsb up to 118 at +5% but after that fsb no display. aparently i cant change multiplier as it is stuck at 18x, no matter what i set it at. under load my pc is staying under 37c, anyway to get more outta this cpu?

also im not letting the ram's speed over the defualt 133. ratio is at 5:6

There is really no use in overclocking a celeron processor. Your lucky enough to get that speed from it as you have done.

If you wanted alittle higher speed, better Overclocking memory would let you raise it alittle bit higher but dont intend to see amazing results. Its not worth it to go out and buy New memory just to see if the Celeron will go higher in speed. You are better off saving that money if you thought about getting new ram, to put that on a new cpu or cpu + mobo combo.

You never posted the brand or kind of memory.

[AnthonyJ]

i forget the brand, give me a minute and ill shut down and see. also i have 1 gig worth of ram coming soon samsung

[AnthonyJ]

alriight i got 2x256mb samsungs in. also i tried the fsb at 118 with core volt at +5% and had ratio at 8:9 and even gave ram +1.6% and windows bsod real quick and comp crashes and reboots

[Tyger]

You're probably better off to get a 2.4 ghz P4 with the correct FSB frequency than to try to overclock a Celeron. The Celerons were made to automatically set the FSB and CPU frequency, eliminating some steps in settting up mass produced and cheap computers. They also have less, much less, cache memory.

[warriorscot]

Overclocking is generally something you do with the best quality hardware you unfortunately have mostly low end components overclocking really isn't advisable. Also you need to list full and detailed hardware specs before anyone could even consider helping you.

[AnthonyJ]

http://www.ecs.com.t.../...D=1&LanID=9
board ^
cpu is a
Field Value
CPU Properties
CPU Type Intel Celeron, 2000 MHz (18 x 111)
CPU Alias Willamette-128
CPU Stepping E0
Instruction Set x86, MMX, SSE, SSE2
Original Clock 1800 MHz
Engineering Sample No
L1 Trace Cache 12K Instructions
L1 Data Cache 8 KB
L2 Cache 128 KB (On-Die, ECC, ATC, Full-Speed)

CPU Physical Info
Package Type 478 Pin uPGA
Package Size 3.50 cm x 3.50 cm
Transistors 42 million
Process Technology 6M, 0.18 um, CMOS
Die Size 217 mm2
Core Voltage 1.75 V
I/O Voltage 1.75 V
Typical Power 63.5 - 66.1 W (depending on clock speed)
Maximum Power 84 - 88 W (depending on clock speed)

CPU Manufacturer
Company Name Intel Corporation
Product Information http://www.intel.com...e/processor.htm

CPU Utilization
CPU #1 0 %

original fsb is 100

and a 630w psu, i have to check brand been while

the ram as i said'
2x256mb
Field Value
Memory Module Properties
Module Name Samsung M3 68L3313CT1-CB0
Serial Number 4F01E8EFh
Manufacture Date Week 24 / 2002
Module Size 256 MB (2 ranks, 4 banks)
Module Type Unbuffered
Memory Type DDR SDRAM
Memory Speed PC2100 (133 MHz)
Module Width 64 bit
Module Voltage SSTL 2.5
Error Detection Method None
Refresh Rate Normal (15.625 us), Self-Refresh

Memory Timings
@ 133 MHz 2.5-3-3-6 (CL-RCD-RP-RAS)
@ 100 MHz 2.0-2-2-5 (CL-RCD-RP-RAS)

Memory Module Features
Early RAS# Precharge Not Supported
Auto-Precharge Not Supported
Precharge All Not Supported
Write1/Read Burst Not Supported
Buffered Address/Control Inputs Not Supported
Registered Address/Control Inputs Not Supported
On-Card PLL (Clock) Not Supported
Buffered DQMB Inputs Not Supported
Registered DQMB Inputs Not Supported
Differential Clock Input Supported
Redundant Row Address Not Supported

Memory Module Manufacturer
Company Name Samsung
Product Information http://www.samsung.c.../DRAM/index.htm


all but website from everest
everest mobo stats

Field Value
Motherboard Properties
Motherboard ID 11/20/2002-SiS-648-6A7I0E19C-00
Motherboard Name ECS L4S8A2

Front Side Bus Properties
Bus Type Intel NetBurst
Bus Width 64-bit
Real Clock 111 MHz (QDR)
Effective Clock 444 MHz
Bandwidth 3556 MB/s

Memory Bus Properties
Bus Type DDR SDRAM
Bus Width 64-bit
Real Clock 133 MHz (DDR)
Effective Clock 267 MHz
Bandwidth 2133 MB/s

Chipset Bus Properties
Bus Type SiS MuTIOL
Bus Width 16-bit

Motherboard Physical Info
CPU Sockets/Slots 1
Expansion Slots 5 PCI, 1 AGP, 1 CNR
RAM Slots 3 DIMM
Integrated Devices Audio
Form Factor ATX
Motherboard Size 190 mm x 300 mm
Motherboard Chipset SiS648

Motherboard Manufacturer
Company Name Elitegroup Computer Systems
Product Information http://www.ecs.com.t...d...=16&LanID=0
BIOS Download http://www.ecs.com.t...px?Categoryid=1