A friend recently moved his Lexmark 8350 All-In-One unit approximately 100 miles because it was getting _very_ limited use in the first location (used it only 3 times in 12 months). However, on setting it up in the new location, he encountered a problem in the start-up routine when the unit was plugged in: the print heads would cycle to the right and back followed by several clicks on the left end of the scan bed. And, this sequence repeats itself over and over until the unit is unplugged. Also, he noted that the scan lamp is at the right end of the scan bed whereas it belongs at the left end. Any suggestions would be greatly appreciated.
Posted 08 September 2007 - 05:23 PM
Sign In
Create Account
