Today I have managed somehow to get a connection using an ethernet cable, but still can not get wireless connection!
Below is the result of the Windows Networks Diagnbostics - could someone please tell me how to correct the fault?
Mant thanks
Dorsettaffy
Last diagnostic run time: 11/11/07 11:03:53 Gateway Diagnostic
Gateway
info The following proxy configuration is being used by IE: Automatically Detect Settings:Enabled Automatic Configuration Script: Proxy Server: Proxy Bypass list:
info Could not get proxy settings via the Automatic Proxy Configuration mechanism
info This computer has the following default gateway entry(ies): 0.0.0.0
warn There is no default gateway entry
action Automated repair: Reset network connection
action Disabling the network adapter
action Enabling the network adapter
info Network adapter successfully enabled
info This computer has the following default gateway entry(ies): 0.0.0.0
warn There is no default gateway entry
info Redirecting user to support call
IP Layer Diagnostic
Corrupted IP routing table
warn The default route is missing or invalid
Invalid ARP cache entries
action The ARP cache has been flushed
IP Configuration Diagnostic
Invalid IP address
info Valid IP address detected: 192.***.0.1
Wireless Diagnostic
Wireless - Service disabled
Wireless - User SSID
action User input required: Specify network name or SSID
Wireless - First time setup
info The Wireless Network name (SSID) to which the user would like to connect = SpeedTouch******.
Wireless - Radio off
info Valid IP address detected: 192.***.0.1
Wireless - Out of range
Wireless - Hardware issue
Wireless - Novice user
Wireless - Ad-hoc network
Wireless - Less preferred
Wireless - 802.1x enabled
Wireless - Configuration mismatch
Wireless - Low SNR
WinSock Diagnostic
WinSock status
info All base service provider entries are present in the Winsock catalog.
info The Winsock Service provider chains are valid.
info Provider entry MSAFD Tcpip [TCP/IP] passed the loopback communication test.
info Provider entry MSAFD Tcpip [UDP/IP] passed the loopback communication test.
info Provider entry RSVP UDP Service Provider passed the loopback communication test.
info Provider entry RSVP TCP Service Provider passed the loopback communication test.
info Connectivity is valid for all Winsock service providers.
Network Adapter Diagnostic
Network location detection
info Using home Internet connection
Network adapter identification
info Network connection: Name=Local Area Connection, Device=VIA Rhine II Fast Ethernet Adapter, MediaType=LAN, SubMediaType=LAN
info Network connection: Name=Wireless Network Connection 2, Device=802.11 USB Wireless LAN Adapter #2, MediaType=LAN, SubMediaType=WIRELESS
info Network connection: Name=Plus.net, Device=WAN Miniport (PPPOE), MediaType=PPPOE, SubMediaType=NONE
info Network connection: Name=PlusNet, Device=WAN Miniport (PPPOE), MediaType=PPPOE, SubMediaType=NONE
info Both Ethernet and Wireless connections available, prompting user for selection
action User input required: Select network connection
info Wireless connection selected
Network adapter status
info Network connection status: Connected
HTTP, HTTPS, FTP Diagnostic
HTTP, HTTPS, FTP connectivity
warn HTTP: Error 12007 connecting to www.microsoft.com: The server name or address could not be resolved
warn HTTP: Error 12007 connecting to www.hotmail.com: The server name or address could not be resolved
warn HTTPS: Error 12007 connecting to www.microsoft.com: The server name or address could not be resolved
warn HTTPS: Error 12007 connecting to www.passport.net: The server name or address could not be resolved
warn FTP (Passive): Error 12007 connecting to ftp.microsoft.com: The server name or address could not be resolved
warn FTP (Active): Error 12007 connecting to ftp.microsoft.com: The server name or address could not be resolved
error Could not make an HTTP connection.
error Could not make an HTTPS connection.
error Could not make an FTP connection.