Jump to content

Welcome to Geeks to Go - Register now for FREE

Geeks To Go is a helpful hub, where thousands of volunteer geeks quickly serve friendly answers and support. Check out the forums and get free advice from the experts. Register now to gain access to all of our features, it's FREE and only takes one minute. Once registered and logged in, you will be able to create topics, post replies to existing threads, give reputation to your fellow members, get your own private messenger, post status updates, manage your profile and so much more.

Create Account How it Works
Photo

Nero Won't Burn DVDs


  • Please log in to reply

#1
psychokiller

psychokiller

    New Member

  • Member
  • Pip
  • 3 posts
Hiya,
I'm as ignorant as it gets about this sort of thing, but Nero will not burn any DVDs. It still burns CDs, I think, though I haven't tested that in a while either. I wish I knew what else to say... it's an internal device, though one bought a little over a year after I bought the computer (2005 for the computer, late in 2006 for the burner), but I had pretty computer savvy friends help both build the computer and install the burner... I have a partitioned hard drive (C for system stuff, D for all else). I use DVD+Rs.
Uhh... feel free to ask for whatever additional information you might require. I know little of this.
Thankyou in advance! Here's the log file from Nero.

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'D:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 5:35:34 PM
Nero Version: 6.6.0.18
Internal Version: 6, 6, 0, 18e
(Nero Express)
Recorder: <AOPEN DUW1616/ARR> Version: 1030 - HA 1 TA 1 - 6.6.0.18
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <SONY DVD-ROM DDU1621 >Version: S3.5 - HA 1 TA 0 - 6.6.0.18
Adapter driver: <atapi> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : WDC WD1200BB-00DWA0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : SONY DVD-ROM DDU1621 atapi Port 1 ID 0 DMA: On
CdRomPeripheral : AOPEN DUW1616/ARR atapi Port 1 ID 1 DMA: On
CdRomPeripheral : YZ2382W TTG956Q 2.0B vaxscsi Port 2 ID 0 DMA: Off
CdRomPeripheral : LD3014L RFJ736G 1.0 aqb270oa Port 3 ID 0 DMA: Off

=== CDRom-Device-Map ===
SONY DVD-ROM DDU1621 E: CDRom0
AOPEN DUW1616/ARR F: CDRom1
YZ2382W TTG956Q I: CDRom2
LD3014L RFJ736G H: CDRom3
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1023MB (1048052kB)
Free physical memory: 525MB (538416kB)
Memory in use : 48 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

15.11.2007
ISO compilation
11:41:05 PM #1 Text 0 File Isodoc.cpp, Line 6359
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

11:41:06 PM #2 Text 0 File Reader.cpp, Line 127
Reader running

11:41:06 PM #3 Text 0 File Writer.cpp, Line 122
Writer AOPEN DUW1616/ARR running

11:41:06 PM #4 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)

11:41:06 PM #5 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media

11:41:06 PM #6 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2278207 (506:16.07, 4449MB)

11:41:06 PM #7 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO (enabled: CD)

11:41:06 PM #8 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: AOPEN DUW1616/ARR, Media type: DVD+R

11:41:06 PM #9 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================

11:41:06 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2278208 (2278208) = #2278208/506:16.8
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2278208 blocks [AOPEN DUW1616/ARR]
--------------------------------------------------------------

11:41:06 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [AOPEN DUW1616/ARR] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4665769984, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2278208 | lead-out | 1 | 0x41 | 0x00

11:41:06 PM #12 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started

11:41:06 PM #13 Text 0 File Burncd.cpp, Line 4122
Cache writing successful.

11:41:06 PM #14 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed

11:41:06 PM #15 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 12x (16,620 KB/s)

11:41:06 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 2661
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

11:41:06 PM #17 SCSI -1066 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x0C760600
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x08 0x04 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0E
0x00 0x00 0x00 0x00 0x24 0x00

11:41:06 PM #18 SCSI -1066 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 1, TA 1, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xF9 0x15 0x01 0xFF 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0E
0x00 0x00 0x00 0x00 0x24 0x00

11:41:06 PM #19 Text 0 File DVDR.cpp, Line 6168
Drive: AOPEN DUW1616/ARR
Book Type request [gen]: DVD-ROM, write to EEPROM
Changing the Book Type was finished successfully, return code 0

11:41:06 PM #20 CDR -1207 File DVDR.cpp, Line 5306
Book Type automatically set to: DVD-ROM

11:41:07 PM #21 Text 0 File DVDPlusRW.cpp, Line 659
Start write address at LBA 0
DVD high compatibility mode: Yes

11:42:02 PM #22 SCSI -400 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x0C0C0000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x91
Sense Qual: 0x25
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x04 0x00 0x00 0x00 0x00 0x0E
0x00 0x00 0x00 0x00 0x91 0x25

11:42:02 PM #23 CDR -400 File Writer.cpp, Line 311
Unspecified target error

11:42:02 PM #24 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

11:42:02 PM #25 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader

11:42:02 PM #26 SCSI -1066 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 1, TA 1, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x05 0x00 0x00 0x00 0x00 0x0E
0x00 0x00 0x00 0x00 0x24 0x00

11:42:02 PM #27 Phase 127 File dlgbrnst.cpp, Line 1832
Generating DVD high compatibility borders

11:42:02 PM #28 SCSI -1066 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 1, TA 1, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xF9 0x15 0x01 0xFF 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0E
0x00 0x00 0x00 0x00 0x24 0x00

11:42:03 PM #29 Text 0 File DVDR.cpp, Line 6168
Drive: AOPEN DUW1616/ARR
Book Type request [gen]: DVD-ROM, write to EEPROM
Changing the Book Type was finished successfully, return code 0

11:42:03 PM #30 CDR -1066 File WriterStatus.cpp, Line 167
Invalid field in command

11:42:03 PM #31 TRANSFER -24 File WriterStatus.cpp, Line 167
Could not perform end of Disc-at-once

11:42:03 PM #32 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 12x (16,620 KB/s)


Existing drivers:
File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=2560 bytes, created 5/19/2006 4:16:24 PM
File 'Drivers\PXHELP20.SYS': Ver=3.00.56a, size=43528 bytes, created 3/7/2007 6:51:00 PM (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.0 (XPClient.010817-1148), size=86656 bytes, created 8/23/2001 7:00:00 AM (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
  • 0

Advertisements


#2
pip22

pip22

    Trusted Tech

  • Banned
  • PipPipPipPipPip
  • 2,663 posts
Are you sure the burner is compatible with DVD+R? (check)
Using high speed discs on a non high-speed burner perhaps? (check)
Using a brand of disc the burner has never written to before? (try another brand)
  • 0

#3
psychokiller

psychokiller

    New Member

  • Topic Starter
  • Member
  • Pip
  • 3 posts
I've used DVD+Rs of the very same brand before with success numerous times and am using the very same stack of dvds now as then. It is only recently they have ceased to work.

(And yeah, the packaging of the DVD Writer said that it would do either +r or -r. I did check that)
  • 0

#4
starjax

starjax

    Global Moderator

  • Global Moderator
  • 6,591 posts
Also, have you checked to see if you have the latest update for Nero (http://nero.com/). Also have you checked to see that your specifying the correct drive when you burn? Sometimes using a flash drive will cause conflicts with drive letters and can cause some interesting errors.
  • 0

#5
Neil Jones

Neil Jones

    Member 5k

  • Member
  • PipPipPipPipPipPipPipPip
  • 8,476 posts
I note from your log you're burning at 12 speed. Have you tried burning at slower speeds? Your burner may have lost its ability to burn at higher speeds and in conjunction with most mechanical equipment that wears out, it slows down as it ages.
  • 0

#6
psychokiller

psychokiller

    New Member

  • Topic Starter
  • Member
  • Pip
  • 3 posts
Hi, sorry I haven't replied in a long time... various things got in the way... slowing the speed didn't work, unfortunately. I'm also pretty sure I'm specifying the right drive... I even unmounted all virtual drives and the like to be sure. No other burning program I've tried using works either. I'm suspecting something may be wrong with the burner itself... should I be posting a topic in a different forum in such a case?
Thankyou all of you for your suggestions anyway. It is appreciated. :)
  • 0

#7
pip22

pip22

    Trusted Tech

  • Banned
  • PipPipPipPipPip
  • 2,663 posts
After reading your subsequent posts I tend to agree it could well be the dvd-burner that's developed a fault. One of those things that only fitting a replacement will confirm --- luckily they no longer cost a small fortune.
  • 0






Similar Topics

0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users

As Featured On:

Microsoft Yahoo BBC MSN PC Magazine Washington Post HP