Jump to content

Welcome to Geeks to Go - Register now for FREE

Geeks To Go is a helpful hub, where thousands of volunteer geeks quickly serve friendly answers and support. Check out the forums and get free advice from the experts. Register now to gain access to all of our features, it's FREE and only takes one minute. Once registered and logged in, you will be able to create topics, post replies to existing threads, give reputation to your fellow members, get your own private messenger, post status updates, manage your profile and so much more.

Create Account How it Works
Photo

How can I fix partially installed XP


  • Please log in to reply

#1
Kipperkendall

Kipperkendall

    New Member

  • Member
  • Pip
  • 1 posts
I had a system crash which seemed to effect registry keys on Windows XP Media Edition install (had the missing or corrupt file message). Running a Dell so only have the basic repair disks supplied. Tried to run XP repair option (not Repair Console) from disk - it ran for a while reloading XP files, but hit problems where file locations could not be found. Towards the end of installation, system aborted with blue screen message. When I try to restart system, it advises that the system is not fully installed and to please run Windows setup again but I cannot get system to boot from Dell XP disk. It is trying but doesn't recognise the disk in the drive. Guess partial install has messed things up?? There appear to be no hardware issues.

Any ideas how I can get over this? Any help much appreciated - have amerry xmas!

Edited by Kipperkendall, 23 December 2007 - 06:27 AM.

  • 0

Advertisements


#2
Ztruker

Ztruker

    Member 5k

  • Technician
  • 7,065 posts
An XP install, partial or otherwise, cannot prevent the computer from seeing or booting from the CD drive. Boot to BIOS Setup (press F1 or F2 or F10 or Del, whichever your computer uses) during the early part of the boot process, about the time you see the manufacturers logo. Does the CD drive show up there? If yes, then it is at lest being detected by the BIOS. Try pressing the Fn key to load defaults then save changes and reboot, see if that makes a difference. Also make sure the CD drive is set as the first boot device before doing the above.

If this is a desktop system, open the case and make sure the IDE cable and power connector are securely plugged in. Do this with power off. If they are okay then I suspect the CD drive is now defective.
  • 0






Similar Topics

0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users

As Featured On:

Microsoft Yahoo BBC MSN PC Magazine Washington Post HP