Ad-aware has found object(s) on your computer
If you chose to clean your computer from what Ad-aware found, follow these instructions below…
Make sure that you are using the * SE1R41 25.04.2005 * definition file.
Open up Ad-Aware SE and click on the gear to access the Configuration menu. Make sure that this setting is applied.
Click on Tweak > Cleaning engine > UNcheck "Always try to unload modules before deletion".
Disconnect from the internet (for broadband/cable users, it is recommended that you disconnect the cable connection) and close all open browsers or other programs you have running.
Then boot into Safe Mode
To clean your machine, it is highly recommended that you clean the following directory contents (but not the directory folder);
Run CCleaner to assist in this process.
(Setup: go to >options > settings > Uncheck "Only delete files in Windows Temp folders older than 48 hours" for cleaning malware files!)
* C:\Documents and Settings\<Your Profile>\Local Settings\Temporary Internet Files\ <- This will delete all your cached internet content including cookies.
* C:\Documents and Settings\<Your Profile>\Local Settings\Temp\
* C:\Documents and Settings\<Any other users Profile>\Local Settings\Temporary Internet Files\
* C:\Documents and Settings\<Any other users Profile>\Local Settings\Temp\
* Empty your "Recycle Bin".
Run Ad-Aware SE from the command lines shown in the instructions shown below.
Click "Start" > select "Run" > type the text shown below (including the quotation marks and with the same spacing as shown)
"C:\Program Files\Lavasoft\Ad-Aware SE Professional\Ad-Aware.exe" /full +procnuke
(For the Professional version)
"C:\Program Files\Lavasoft\Ad-Aware SE Plus\Ad-Aware.exe" /full +procnuke
(For the Plus version)
"C:\Program Files\Lavasoft\Ad-Aware SE Personal\Ad-Aware.exe" +procnuke
(For the Personal version)
Note; the path above is of the default installation location for Ad-aware SE, if this is different, adjust it to the location that you have installed it to.
When the scan has completed, select next. In the Scanning Results window, select the "Scan Summary"- tab. Check the box next to each "target family" you wish to remove. Click next, Click OK.
If problems are caused by deleting a family, just leave it.
Reboot your computer after removal, run a new "full system scan" and post the results as a reply. Do not open any programs or connect to the internet at this time.
Then copy & paste the complete log file here. Don't quarantine or remove anything at this time, just post a complete logfile. This can sometimes takes 2-3 posts to get it all posted, once the "Summary of this scan" information is shown, you have posted all of your logfile.
Also, remember that when you are posting another logfile keep "Search for negligible risk entries" deselected as negligible risk entries (MRU's) aren't considered as a threat. This option can be changed when choosing your scan type.
Remember to post your fresh scanlog in THIS topic.