[gooiool]

High Speed Dram DLL Settings [option 1]
Why does my Gigabyte GA-P35-DS3L Motherboard not have this option ?
It is not there normally nor if I use F1+Ctrl
I have this in Bios :

Robust Graphic Booster Auto
CPU Clock Ratio 9X
CPU Host Clock Control Enabled
CPU Host Frequencey (mhz) 379
PCI Express Frequency (mhz) 100
C.I.A.2 Disabled
!! Performance Enhanced with Normal
System Memory Multiplier (SPD) [2.50]or [2.40]

But this is not in there ? > High Speed Dram DLL Settings [option 1]

DRAM Timing Selectable (SPD) [manual]
CAS Latency Time [4]
DRAM RAS# to CAS# [4]
DRAM RAS# Precharge [4]
Precharge delay(tRAS) [12]
ACT to ACT Delay (tRRD) [Auto]
Rank Write to READ Delay [Auto]
Write to Precharge Delay [Auto]
Refresh to ACT Delay [0]
Read to Precharge Delay [Auto]
tRD [Auto]
tRD Phase Adjustment [Auto]

System Voltage Control [Manual]
Ddr2/ddr3 OverVoltage Control [+0.4]
PCI-E OverVoltage Control Auto ]
FSB OverVoltage Control [+0.3V]
(G)MCH OverVoltage Control [+0.3V]
CPU Voltage Control [1.425]

[Advertisements]

I couldn't find it either.. Perhaps it's not included in the latest bios..

by the way, that option will only useful if you are thinking of high FSB overclocking and normally, only Micron FatBody, D9GMH, D9GKX, D9GCT and some Promos/Elpida RAM chipset would take advantage from those option.. Couldn't remember which option though..

[fenzodahl512]

I couldn't find it either.. Perhaps it's not included in the latest bios..

by the way, that option will only useful if you are thinking of high FSB overclocking and normally, only Micron FatBody, D9GMH, D9GKX, D9GCT and some Promos/Elpida RAM chipset would take advantage from those option.. Couldn't remember which option though..