Jump to content

Welcome to Geeks to Go - Register now for FREE

Geeks To Go is a helpful hub, where thousands of volunteer geeks quickly serve friendly answers and support. Check out the forums and get free advice from the experts. Register now to gain access to all of our features, it's FREE and only takes one minute. Once registered and logged in, you will be able to create topics, post replies to existing threads, give reputation to your fellow members, get your own private messenger, post status updates, manage your profile and so much more.

Create Account How it Works
Photo

Mother board drivers update went wrong, dvd burner not working anymore


  • Please log in to reply

#1
ghostphalanx

ghostphalanx

    Member

  • Member
  • PipPip
  • 32 posts
Hi, as the title says I had and failed update attempt that made my LG H20 DVD driver not function properly, among other things I may have missed so far.

So I'll first give out my configuration:

MSI P6N SLI i650 chipset 7350 bios version: 2.5
E4300 core 2 duo @ 2.400 ghz
2 GB ram DDR2 667mhz Kingston
160 SATAII hd seagate barracuda

Windows XP SP2

So here's when it all began:

I had an virus, spyware, trojan, general malware infected computer (witch I manage to resolve is this very same forum thanks to the wonderful staff). But before I was clean and safe I tried to make things better by updating my bios, mother board driver and VGA drivers. The bios and VGA where successfully updated. BUT... the nvidia motherboard driver update I downloaded from MSI website wouldn't run properly.
The first time I ran it gave me a message that Older drivers had been found, and also the option to choose yes or no (you're right, it doesn't make sense since is not a question to be answered yes or no). Either way, I clicked the yes button and I assume it tried to install the new drives on top of the old ones. the installation later gave me an error and was automaticly shutdown. So I uninstalled all the drivers related to the update (old or new) and tried to run the msi update again. This time it gave me a different error : 1607, saying I had to have Isntallshield 2008 installed on this machine in order to run the program...

I seriously don't know what to do....

Some more info for you guys: the driver I downloaded was the NVIDIA 650i System Driver v8.43

Can anyone help me? anyone has a hint about whats wrong??

Thanks a lot for your time!!
  • 0

Advertisements


#2
ghostphalanx

ghostphalanx

    Member

  • Topic Starter
  • Member
  • PipPip
  • 32 posts
I tried uninstalling the drives and installing the ones that came with the motherboard cd.... afyer that I tried burning a cd to see if things were good
It gave me the same error
here it is, if someone thinks they can't figure that out:

Diego
Particular
1C82-0000-19E5-MAAX-4008-2121-****

Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 17/7/2002 15:03:20

NT-SPTI used
Nero Version: 7.5.9.0
Internal Version: 7, 5, 9, 0

Recorder: <HL-DT-ST DVD-RAM GSA-H54N>Version: 1.00 - HA 1 TA 0 - 7.5.9.0
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <HL-DT-ST DVD-RAM GSA-H54N>Version: 1.00 - HA 1 TA 0 - 7.5.9.0
Adapter driver: <IDE> HA 1

=== Scsi-Device-Map ===
CdRomPeripheral : HL-DT-ST DVD-RAM GSA-H54N atapi Port 0 ID 0 DMA: Off
DiskPeripheral : ST3160211AS nvata Port 2 ID 0 DMA: Off

=== CDRom-Device-Map ===
HL-DT-ST DVD-RAM GSA-H54N E: CDRom0
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 2047MB (2096412kB)
Free physical memory: 1461MB (1496640kB)
Memory in use : 28 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

22.5.2008
CD Image
13:46:07 #1 Text 0 File SCSIPTICommands.cpp, Line 411
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

13:46:07 #2 Text 0 File Burncd.cpp, Line 3149
HL-DT-ST DVD-RAM GSA-H54N
Buffer underrun protection activated

13:46:07 #3 Text 0 File Burncd.cpp, Line 3451
Turn on Track-At-Once, using CD-R/RW media

13:47:01 #4 Text 0 File DlgWaitCD.cpp, Line 306
Last possible write address on media: 359848 ( 79:59.73)
Last address to be written: 297013 ( 66:02.13)

13:47:01 #5 Text 0 File DlgWaitCD.cpp, Line 318
Write in overburning mode: NO (enabled: CD)

13:47:01 #6 Text 0 File DlgWaitCD.cpp, Line 2903
Recorder: HL-DT-ST DVD-RAM GSA-H54N;
CDR code: 00 97 24 16; OSJ entry from: SONY Corporation
ATIP Data:
Special Info [hex] 1: D0 00 A0, 2: 61 18 10 (LI 97:24.16), 3: 4F 3B 4A (LO 79:59.74)
Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 80 00 (invalid), 3: 00 00 00 (invalid)

13:47:01 #7 Text 0 File DlgWaitCD.cpp, Line 490
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Disc not writeable. Insert writeable disc.
(Medium in drive: CD-R. Medium required by compilation: CD-R/RW.)

13:47:01 #8 Text 0 File ThreadedTransferInterface.cpp, Line 821
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, Joliet)
2 indices, index0 (150) not provided
original disc pos #0 + 297014 (297014) = #297014/66:0.14
not relocatable, disc pos for caching/writing not required/not required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 296862 blocks [E: HL-DT-ST DVD-RAM GSA-H54N]
--------------------------------------------------------------

13:47:01 #9 Text 0 File ThreadedTransferInterface.cpp, Line 1024
Prepare [E: HL-DT-ST DVD-RAM GSA-H54N] for write in TAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 608591872, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
-150 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
-150 | 1 | 0 | 0x41 | 297014 | 296714 | 0x00
0 | 1 | 1 | 0x41 | 297014 | 296864 | 0x00
297014 | lead-out | 1 | 0x41 | 0 | 0 | 0x00

13:47:01 #10 Text 0 File ThreadedTransferInterface.cpp, Line 1095
Removed 2 run-out blocks from end of track 1. Length: 296864 -> 296862.

13:47:01 #11 Text 0 File SCSIPTICommands.cpp, Line 209
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

13:47:01 #12 Phase 36 File dlgbrnst.cpp, Line 1746
Burn process started at 16x (2.400 KB/s)

13:47:01 #13 Text 0 File ThreadedTransferInterface.cpp, Line 2743
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

13:47:01 #14 Text 0 File MMC.cpp, Line 22179
Set BUFE: Buffer underrun protection -> ON

13:48:27 #15 SPTI -1119 File SCSIPassThrough.cpp, Line 179
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1119)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x09
Sense Qual: 0x00
CDB Data: 0x2A 00 00 00 9B E0 00 00 20 00 00 00
Sense Area: 0x70 00 04 00 00 00 00 0E 00 00 00 00 09
Buffer x0bf63800: Len x10000
0xEA D3 7F 01 96 7A 84 22 DC B6 C5 D1 4B 31 BE 18
0xF0 CF CE FB 37 DF 4C D8 48 44 08 14 E1 E0 3B 0B
0xEB E5 EC 98 AE F6 04 AA 69 B0 C7 6D 7C 9C 49 DE

13:48:27 #16 CDR -1119 File Writer.cpp, Line 299
Track following error
E: HL-DT-ST DVD-RAM GSA-H54N

13:48:27 #17 CDR -201 File WriterStatus.cpp, Line 195
Invalid write state
E: HL-DT-ST DVD-RAM GSA-H54N

13:48:27 #18 TRANSFER -18 File WriterStatus.cpp, Line 195
Could not perform EndTrack

13:48:27 #19 Text 0 File MMC.cpp, Line 16997
<HL-DT-STDVD-RAM GSA-H54N> start Close Session

13:48:47 #20 Phase 38 File dlgbrnst.cpp, Line 1746
Burn process failed at 16x (2.400 KB/s)

13:48:47 #21 Text 0 File SCSIPTICommands.cpp, Line 254
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

13:48:54 #22 Text 0 File Cdrdrv.cpp, Line 10467
DriveLocker: UnLockVolume completed

13:48:54 #23 Text 0 File SCSIPTICommands.cpp, Line 411
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL


Existing drivers:
File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=9464 bytes, created 7/3/2007 20:51:00
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002) built by: WinDDK, size=16512 bytes, created 17/7/2002 14:05:10
File 'Drivers\PXHELP20.SYS': Ver=3.00.56a, size=43528 bytes, created 7/3/2007 20:51:00 (Prassi/Veritas driver for win 2K)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
  • 0






Similar Topics

0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users

As Featured On:

Microsoft Yahoo BBC MSN PC Magazine Washington Post HP