How to Restore to Factory Settings without CD - Geeks to Go Forums

Jump to content

Log in Register Register Malware removal guide How it works

How to Restore to Factory Settings without CD Help please

#1 Joel Sulger

  • Group: Member
  • Posts: 3
  • Joined: 25-May 08

Posted 25 May 2008 - 02:56 PM

Ok so my computer has been infested with spyware over and over. Im looking for a way to restore to factory settings without the CD which I lost. I bought a dell inspiron 1500 laptop. System restore is not working because restore point i previously set is not on there. I downloaded and ran AVG ( took 2 hours to scan) and it found alot of spyware and I thought removed but it still is giving me pop ups and warning of trojan viruses. I have restored to factory settings before without cd key but cannot remember how to. I remember way I did it was like by pushing control F8 or soemthing when start up was happening and this brought me to the screen to restore to factory. Now it isnt working when try it is it control F something else or what? Can someone help me figure out how to do this again? Thank you.

#2 cmpm

  • Group: Member
  • Posts: 561
  • Joined: 19-February 06

Posted 25 May 2008 - 03:05 PM

Try F11. F8 is for safe mode and boot to last known good configuration.

#3 Joel Sulger

  • Group: Member
  • Posts: 3
  • Joined: 25-May 08

Posted 25 May 2008 - 03:33 PM

F11 didnt work.. I got to Bios by F12 but cannot find the system restore there.

#4 cmpm

  • Group: Member
  • Posts: 561
  • Joined: 19-February 06

Posted 25 May 2008 - 04:58 PM

Well....you either go to the maker's website and find your model and see if there is a manual with instructions or post the make and model of your computer here and I will do my best to find out all I can on it.

It's peaked my interest seeing that F12 takes you to the bios.
But you can't restore an operating system from there.

#5 Joel Sulger

  • Group: Member
  • Posts: 3
  • Joined: 25-May 08

Posted 25 May 2008 - 05:20 PM

ok i tried again and ctrl F11 worked this time i had to hold it down for a bit and just wait it sits for a while last time i did it i clicked to bios i guess. It sits and loads for like 2-3 minutes. Thanks for the help

#6 envisible

  • Group: Member
  • Posts: 1
  • Joined: 23-January 10

Posted 23 January 2010 - 08:43 AM

well im trying this too and i have never restored my computer to factory settings before my uncle used to but i when even he does it it takes him like a month before he gives the computer back so im trying to do it myself. i tried f8 it doesnot have the repair system option or factory settings option i tried f12 that dint either. idk if f11 is safe tho cause my pc keeps beeping for like as long as i hold it

#7 123Runner

  • Group: Member
  • Posts: 4,114
  • Joined: 04-December 06

Posted 23 January 2010 - 01:29 PM

To CMPM and others reading this.

View Postcmpm, on May 25 2008, 05:58 PM, said:

It's peaked my interest seeing that F12 takes you to the bios.
But you can't restore an operating system from there.
There has never been any place in the bios to restore an OS to factory. What you might be thinking of is "load bios defaults". This is completely different.

#8 Bishopman989

  • Group: Member
  • Posts: 1
  • Joined: 28-May 10

Posted 28 May 2010 - 09:14 AM

Is it possible to restore your computer but keep all of the saved documents on your computer without moving them some where else

#9 heartofasoldier0

  • Group: Member
  • Posts: 2
  • Joined: 31-July 10

Posted 31 July 2010 - 11:26 PM

View PostJoel Sulger, on 25 May 2008 - 02:56 PM, said:

Ok so my computer has been infested with spyware over and over. Im looking for a way to restore to factory settings without the CD which I lost. I bought a dell inspiron 1500 laptop. System restore is not working because restore point i previously set is not on there. I downloaded and ran AVG ( took 2 hours to scan) and it found alot of spyware and I thought removed but it still is giving me pop ups and warning of trojan viruses. I have restored to factory settings before without cd key but cannot remember how to. I remember way I did it was like by pushing control F8 or soemthing when start up was happening and this brought me to the screen to restore to factory. Now it isnt working when try it is it control F something else or what? Can someone help me figure out how to do this again? Thank you.



what you are looking for is Alt + F10 before the windows startup screen...I had the exact same problem you do and googled this page and the guy that helped u didnt help me really at all..so i messed around with the startup codes and and it took me to the bios... I think this might only work for windows vista but who knows...i hope this helps someone who barely know what the other guy was talking about lol what this does is wipe out the drive except for the windows files and u start all over again rather than take it to get it cleaned for 50$ and if ur computer didnt come with a Windows disk and u also dont want to pay 300$ for a windows disk....

-brAd

#10 heartofasoldier0

  • Group: Member
  • Posts: 2
  • Joined: 31-July 10

Posted 31 July 2010 - 11:33 PM

View Postenvisible, on 23 January 2010 - 08:43 AM, said:

well im trying this too and i have never restored my computer to factory settings before my uncle used to but i when even he does it it takes him like a month before he gives the computer back so im trying to do it myself. i tried f8 it doesnot have the repair system option or factory settings option i tried f12 that dint either. idk if f11 is safe tho cause my pc keeps beeping for like as long as i hold it



try Alt + F10 on startup like i said this may only work for vista but who knows

#11 123Runner

  • Group: Member
  • Posts: 4,114
  • Joined: 04-December 06

Posted 01 August 2010 - 06:07 AM

You have to use the correct combination of keys. And that is dependent on the computer manufacturer and whether there is even a recovery partition.
The following are only a few.

Recovery Partitions

Dell
press and hold ctrl + F11 for recovery

HP
Press the power button to start the HP. Press and hold the F11 key to launch the HP Recovery Manager from the recovery partition.

Gateway
you're supposed to hold down the ALT key and repeatedly tap f10.
When you hit F11, the system boots to another partition on the hard drive.

#12 iKiddmars

  • Group: Member
  • Posts: 1
  • Joined: 07-August 10

Posted 07 August 2010 - 04:19 PM

View Post123Runner, on 01 August 2010 - 06:07 AM, said:

You have to use the correct combination of keys. And that is dependent on the computer manufacturer and whether there is even a recovery partition.
The following are only a few.

Recovery Partitions

Dell
press and hold ctrl + F11 for recovery

HP
Press the power button to start the HP. Press and hold the F11 key to launch the HP Recovery Manager from the recovery partition.

Gateway
you're supposed to hold down the ALT key and repeatedly tap f10.
When you hit F11, the system boots to another partition on the hard drive.

What are the steps for Emachines

#13 123Runner

  • Group: Member
  • Posts: 4,114
  • Joined: 04-December 06

Posted 07 August 2010 - 05:44 PM

E Machines factory restore. However, if the drive is new or has been formated completely the partition won't be there.

E Machines

#14 IceyCake

  • Group: Member
  • Posts: 3
  • Joined: 10-August 10

Posted 10 August 2010 - 07:06 PM

View Post123Runner, on 07 August 2010 - 05:44 PM, said:

E Machines factory restore. However, if the drive is new or has been formated completely the partition won't be there.

E Machines



Would the ones you posted above work on a Toshiba laptop as well?

#15 123Runner

  • Group: Member
  • Posts: 4,114
  • Joined: 04-December 06

Posted 11 August 2010 - 04:28 AM

In order for us to help you correctly you need to start your own topic.

Share this topic:


  • 4 Pages +
  • 1
  • 2
  • 3
  • Last »