[evilvyse]

My computer was working fine last night. I just rebooted because for some reason my sounds are low, after rebooting it , it wont go pass the windows loading thing then it'll go back displaying "lanparty dk" [my motherboard] then it wont go through the loading screen again. This will repeat the sequence like forever.

I don't receive any errors, no nothing. Any idea guys?

[Advertisements]

Do u can go to the Safe mode.

Regards,

[mirjel]

Do u can go to the Safe mode.

Regards,

[evilvyse]

I cant, after checking primary and secondary ide slaves (which is none) it'll go to a black screen then go back to checking the slaves again.

I tried putting my windows xp cd, but it doesnt do anything.


please help, this computer is only 4months old.



Im desperate for help guys

[Makaveli213]

If you are not able to get into Safe Mode you will have to use a Restore Point or a Windows Repair.

Since you say inserting the Windows CD did nothing i would have to wager to guess that the BIOS is not set to boot from CD first. Check that setting.

Cheers,
Mak

[evilvyse]

I tried changing the boot sequence, still no help.

I cant even go to loading screen. Tried putting my windows xp cd but nothing happens.

another question, my primary and secondary ide slave is set to none, is that default?

I turn on power, shows logo, checking slaves, black screen after 5 secs go back to logo, checking slaves, black screen.

This can continue like forever, i have no idea what happened to it. Works fine last night, after rebooting, "tadah" this happens.

help?

[Makaveli213]

Sounds like the jumper settings on your hard drives is off. Do you have multiple hard drives setup? Do you have multiple Optical drives?

Cheers,
Mak

[mirjel]

I tried changing the boot sequence, still no help.

I cant even go to loading screen. Tried putting my windows xp cd but nothing happens.

another question, my primary and secondary ide slave is set to none, is that default?I turn on power, shows logo, checking slaves, black screen after 5 secs go back to logo, checking slaves, black screen.

This can continue like forever, i have no idea what happened to it. Works fine last night, after rebooting, "tadah" this happens.

help?

Change ur primary ide slave to ur HARD DRIVE and secondary ide slave to CD ROM or DVD ROM.

Regards,

[evilvyse]

Sounds like the jumper settings on your hard drives is off. Do you have multiple hard drives setup? Do you have multiple Optical drives?

Cheers,
Mak

i only have 1 hard drive and 1 optical (meaning dvd,cd rom).

raptor 150gb for hard drive, dvd rom for optical.

[evilvyse]

I tried changing the boot sequence, still no help.

I cant even go to loading screen. Tried putting my windows xp cd but nothing happens.

another question, my primary and secondary ide slave is set to none, is that default?I turn on power, shows logo, checking slaves, black screen after 5 secs go back to logo, checking slaves, black screen.

This can continue like forever, i have no idea what happened to it. Works fine last night, after rebooting, "tadah" this happens.

help?

Change ur primary ide slave to ur HARD DRIVE and secondary ide slave to CD ROM or DVD ROM.

Regards,

I'll try to set my primary ide slave to my HD and 2nd slave to DVD. Last time i checked, it was "none" Maybe thats why, i'll let you know.

[mirjel]

How many hard disks and CD/DVD u have.

Regards,

[evilvyse]

How many hard disks and CD/DVD u have.

Regards,

I only have 1 HD (raptor 10,000rpm 150gb) and a DVD-RW ROM.

[mirjel]

Ok. Restart ur computer, after restart keep button delete. In the bios set up primary and secondary slave :

Primary master : HD raptor
Primary slave : DVD-RW ROM
Secondary master : None
Secondary slave : None

or

Primary master : HD raptor
Primary slave : None
Secondary master : DVD-RW ROM
Secondary slave : None

Esc >> Save >> Restart

Regards,

[evilvyse]

Ok. Restart ur computer, after restart keep button delete. In the bios set up primary and secondary slave :

Primary master : HD raptor
Primary slave : DVD-RW ROM
Secondary master : None
Secondary slave : None

or

Primary master : HD raptor
Primary slave : None
Secondary master : DVD-RW ROM
Secondary slave : None

Esc >> Save >> Restart

Regards,

I tried Changing it, IDE HDD auto-detection = none

my hd and dvd rom is set to internal phy sata1 and sata3.

anything else? T_T

[evilvyse]

Gotta be honest, I'm not really smart about this computer stuff.

So i have no idea how to set it to primary.

All I did was enter (IDE HDD auto-detection) then = none.

Edited by evilvyse, 21 June 2008 - 02:27 PM.

[mirjel]

Try set all chanels to auto-detection then restart.

Edited by mirjel, 21 June 2008 - 02:45 PM.