Built a computer with the folling specs:
AMD64 3400+
K8VT800 Pro
2x160Gig Seagate SATA HD (not running in RAID)
2x512Mb Generic RAM (PC3200 DDR SDRAM)
GeCube 9600XT
Hairong 400W PSU and generic case
Pioneer DVD Burner
XP Pro with SP2
Ran fine for a week or 2 before it started to crash, screen would just freeze, no BSOD. CPU temp was getting up to 60 deg celcius before automatically crashing, so removed the stock HSF and replaced with a ThermalTake Silent Tower. Reduced the temp to just over 50 deg under load, but the problem still existed. It got worse and worse so I decided to reformat the computer, in case there was software conflicts, but the computer was freezing up during the re-installing. I removed one RAM stick, and the installation went through without hiccup. replaced with the other RAM stick, formatted and reinstalled, again without a problem. When I put both RAM sticks in, the system would freeze, so I thought I had the problem solved. But again, while browing, 30 minutes later, the computer froze up.
Checked the web, found many references to other uses with the same problems, and attempted all solutions listed, including using older and newer drivers and running at AGP4x. So I decided to purchase a 6600GT, which I was looking to do anyways. Thinking this would solve all my problems, after only 10 minutes of installing it, on the nVidia site, the computer froze up again when I pressed on a link. Also, to dispell any thoughts of a faulty graphics card, I have run both the ATI and nVidia cards in a different comuter with no problems.
I know I have to throw more money at this thing, but don't wanna spend more than what I have to, since I already have. I am guessing at the least I will have to buy a new MOBO, and possibly a new PSU as well. So my questions are:
1. What MOBO and PSU should I be looking at to rectify this problem?
2. Is there anything I should check before I splash out this money? Last thing I want to do is spend this money and still have this problem at the end of it.
Thanks in advance