[Encrypt]

I have Windows Vista. I came home from work last night and turned on the computer and it never got past the Microsoft Loading screen, the green bar just kept moving and nothing happened. Restarted the computer and it said that Windows Failed to Start, Try the Installation Disc for a possible repair. I put in the installation disc, went through the process of repairing and it said that it repaired it, but still had the same problem of never getting past the Microsoft Loading screen. Also tried to restart in safe mode, but it doesn't start at all, getting stuck on something like csdisk. Any help would be great, I don't really want to reformat and lose all of my data.

[Advertisements]

I really need some help..

[Encrypt]

I really need some help..

[hfcg]

Hello,
Your computer is trying to run check disc, a utility that checks (and repairs) your hard drive for errors.
You have been stopping this from running until finnished so it keeps trying.
By stopping the check disc utility you may have caused some corruption, but we will not know until you let the check disc utility run until it is finnished.
This can take 45 minutes or longer.

[Encrypt]

I've let it attempt to load the operating system for over an hour and it's not actually doing the check disk, it's not even getting to that point I don't think. It stays on the loading screen with the green progress bar at the bottom.

[Broni]

getting stuck on something like csdisk

It may help, if we know what "something" exactly is.

[hfcg]

The Windows Recovery Environment Command Prompt is a text-based console that allows that allows you to perform many tasks on your computer by typing in the commands that you would like to execute. These commands allow you to perform a range of tasks from managing the files on your hard drives, formatting and repartitioning hard drives, configuring how Windows boots, deleting and copying files, scanning your computer for malware, as well as many other tasks. In past versions of the Windows, the Command Prompt would typically not allow you to run any of your Windows programs that require a graphical user interface. The Command Prompt in the Windows Recovery Environment, though, does allow you to launch certain Windows programs. This is a huge advantage as you now have a much larger variety of tools at your disposal to repair your computer.

To access the Windows Recovery Environment Command Prompt you need to boot your computer off of the Windows Vista DVD by inserting it into the DVD reader on your computer and turning your computer on. Your computer will start and you should see the BIOS listing the hardware on your computer as well as other information. When that information has been cleared, your computer will see that a bootable DVD is inserted and present a prompt similar to Figure 1 below.


As you want to boot the computer from the Windows Vista DVD, you need to press a key on your keyboard, and any key will do, when you see the above prompt. It is possible that the DVD that came with your computer does not allow you to boot off from it. If this is the case, then your computer manufacturer most likely installed the Windows Recovery Environment directly on to a small partition on your hard drive. To access this partition, you would slowly tap the F8 key on your keyboard after the BIOS information clears from your screen until you see the Windows startup menu. From this menu use your arrow keys to select the option for the Windows Recovery Environment and press the enter key on your keyboard. You should now see a black screen with a white status bar at the bottom stating Windows is loading files.... After a while, the status bar will turn completely white and you will see a screen stating that Windows is loading. The Windows Setup environment will continue to load and when finished you will be presented with a screen
At this screen you should configure the Language to install, Time and currency format, and Keyboard or input method options so that they are set correctly for your location. When done, press the Next button. You will now be at the main Windows Vista setup screen where you would normally install Vista on to a computer.

You should now click on the Repair your computer option, which will bring you to a new screen where the repair process will look for all Windows Vista installations on your computer. When done you will be presented with the System Recovery Options dialog box

Select the Vista installation you would like to repair, and if there are drivers you need to load in order for Vista to access any of your drives or other components, then you should click on the Load Drivers button to load them. When ready, press the Next button to continue. If the repair process does not detect any problems starting Vista, it will display a list of available recovery tools. If it does detect a problem it will attempt to perform a Startup Repair to automatically fix these problems. If you would like to allow this process to continue, then you can read more about it here. Otherwise click on the Cancel button and select the View advanced options for system recovery and support option to see the list of recovery tools.


At this screen you would then click on the Command Prompt option. Once you click on that option, the Command Prompt will open

If you are unfamiliar with the Windows Command Prompt, the first thing you may notice is that there is no graphical user interface to and instead you need to type in all of your commands. Though this may be daunting, once you learn the commands and programs that you can use in the command prompt, you will find it a very powerful repair tool for removing stubborn malware, fixing boot issues, tweaking the Windows Boot Manager when you cannot load Windows, and accessing your files.
Using the command prompt is simple. When you want to perform a task you simply type them in with your keyboard, and when done typing the command, press the enter key. If the command was entered correctly, it will execute and display the information you requested. A powerful feature of the Recovery Console Command Prompt is that you can not only run console programs, but you can also run certain Windows programs such as Notepad or an antivirus program. Unfortunately, not all Windows programs will be able to run in this environment, so you will need to test them out one at a time.
Use the command chkdsk and it will Scan your hard disk for errors and fix them.

When you are finished using the Command Prompt you can exit it by typing exit and then pressing the enter key on your keyboard. The command prompt will close and you will now be back at the list of available repair tools.

The Windows Recovery Environment Command Prompt is such a powerful tool because you can perform actions on your files and data without having to be in Windows. This means that if you are infected with malware you can use the recovery environment to clean your computer without fear of the malware hindering your efforts. If you find other Windows programs that work within the recovery environment, please let us know about them in the forums.

If you are still having problems after using this tool, then you can try the other advanced repair tools. Tutorials on how to use these tools can be found below: