[nyrmlieber]

I am having a consistent problem buring DVD files with NERO 6 obtained from DVD Shrink. Every once and a while, it will successfully burn a disk. But, it will often give me the error below anywhere from 20% to 95% through the disk. ANy ideas? I just got this burner. It is hooked up to my laptop with a BYTECC external case. I am buring at 4X to prevent buffer underrun with memorex 8X DVD +R.

Error:

11:16:33 AM #122 Text 0 File Cdrdrv.cpp, Line 1288
11:16:33.765 - PIONEER DVD-RW DVR-109\H2 T0 : Queue again later

11:22:23 AM #123 SCSI -500 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x0B250000
Status: 0x02 (0x03, SCSI_ABORTED)
HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x26
Sense Qual: 0x02
CDB Data: 0x2A 0x00 0x00 0x12 0x25 0xE0 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x26 0x02

11:22:50 AM #124 SCSI -500 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x0B290000
Status: 0x02 (0x03, SCSI_ABORTED)
HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x26
Sense Qual: 0x02
CDB Data: 0x2A 0x00 0x00 0x13 0x33 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x26 0x02

11:24:24 AM #125 SCSI -500 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x0B290000
Status: 0x02 (0x03, SCSI_ABORTED)
HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x26
Sense Qual: 0x02
CDB Data: 0x2A 0x00 0x00 0x16 0xDF 0x20 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x26 0x02

11:24:24 AM #126 SCSI -1064 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x0B910600
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x21
Sense Qual: 0x02
CDB Data: 0x2A 0x00 0x00 0x16 0xDF 0x20 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0E
0x00 0x00 0x00 0x00 0x21 0x02

11:24:25 AM #127 CDR -1064 File Writer.cpp, Line 311
Invalid block address

11:24:31 AM #128 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

11:24:37 AM #129 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader

11:24:43 AM #130 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 4x (5,540 KB/s)


Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.03.12a, size=20576 bytes, created 11/18/2004 8:10:06 PM (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 6:59:44 PM (Adapter driver for src)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)


Thanks!

Attached Files

•  Log.txt   20.81KB   307 downloads

[Advertisements]

Just ahead of pressing burn, click recording settings and tick determine maximum speed.

You can also adjust the write speed manually here

[Retired Tech]

Just ahead of pressing burn, click recording settings and tick determine maximum speed.

You can also adjust the write speed manually here

[nyrmlieber]

I tried at 4x, 6x, 8x, they all seem to randomly create errors, but the error is alway the same.

[Retired Tech]

Do you have firmware version 1.40 for the Pioneer

Nero gives me an error and a coaster if I do not tick determine maximum write speed

[nyrmlieber]

I will try installing that firmware. I have firmware 1.50, but I noticed on the pioneer website that it was only at 1.40.

[Retired Tech]

It could be worth getting Pioneer's take on it, I saw 1.40 on the site and this should be up to date, where did 1.50 come from