Posted 03 July 2009 - 12:08 PM
Posted 03 July 2009 - 12:48 PM
If it is a file required by the mic, it should get installed with any software required by the mic.
Posted 03 July 2009 - 11:41 PM
Is this a driver that you are looking for?
Give the make/model of the mic.
Posted 04 July 2009 - 07:18 AM
Posted 04 July 2009 - 12:33 PM
What does it have to do with installing microphone?
What kind of microphone problem are you having?
Posted 07 July 2009 - 02:43 PM
Posted 07 July 2009 - 06:39 PM
Try using sound recorder and see if your mic works.
Posted 08 July 2009 - 06:01 PM
What is the make/model of your mic!!!
Posted 18 July 2009 - 09:56 PM
and it sounds like theres a helicopter behind me over it.
Posted 19 July 2009 - 10:39 AM
Look here: http://www.logitech....cl=us,en?osid=1
No additional drivers are needed. Is this your mic?
Posted 19 July 2009 - 11:12 AM
Start and then to Run
Type in sndvol32.exe and press Enter
If Microphone is not in the list then click on Options and then on Properties
Scroll down in the Show the following volume controls: area and make sure to put a check in the box next to Microphone and then click OK
Check and make sure the Volume is turned up and that the Mute box is not checked[/b]
Now click on the Advanced Button and in the new window click the Mic Boost box so it is not checked.
Posted 19 July 2009 - 10:29 PM
the found new hardware wizard opens and while its installing it asks for vcsvad.sys
the helicopter noise only happens in counter strike source using the mic.
Posted 20 July 2009 - 12:43 AM
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users