[hines9514]

Hey guys if you can help me out on this one ill owe you all huge. but heres my problem. my computer just crashed last night and the blue screen of death came up... I run windows XP. so when i went to restart the machine in safe mode all the start up scripts load like normal but after they finish it just restarts and the terror continues. if i try the other safe mde options with networking ect... the same thing happens over and over again. Since in knew it was pretty much screwed on safe mode i tried starting it in normal mode and the blue screen came back up but this time the only thing it said was "UNKNOWN ERROR code c0000145" can someone help me???

[Advertisements]

Hello hines9514.... Welcome to GeeksToGo,

I'm sorry to hear about your issue. We will try to help you resolve this as soon as possible.
Please understand we are all volunteers and we are not here all the time. Sometimes it may be a extended amount of time to get back to you. If it has been more then 3 days please shoot me a PM and I will try to get back to you quickly then.

It may be a hard drive or memory problem.

Run hard drive diagnostics: http://www.tacktech....ay.cfm?ttid=287
Make sure, you select tool, which is appropriate for the brand of your hard drive.
Depending on the program, it'll create bootable floppy, or bootable CD.
If downloaded file is of .iso type, use ImgBurn: http://www.imgburn.com/ to burn .iso file to a CD (select "Write image file to disc" option), and make the CD bootable.

NOTE. If your hard drive is made by Toshiba, unfortunately, you're out of luck, because Toshiba doesn't provide any diagnostic tool.

Thanks to Broni for the instructions

Once you have posted the results of the test then do the following.


Let's check your memory and make sure there is no issue with it. Download memtest86 from the link in my signature below.


Get the file that is named Download - The one you want is "Download - Pre-compiled Bootable ISO (.zip). When it downloads, it will be labeled memtest86+2.11.iso.zip
Unzip the file once you download it. You should have a .iso file in the unzipped directory. It will look like a zip file in some cases but the file name will now be memtest86+2.11.iso

if you don't have a burning program that will burn .ISO files get burncdcc in my signature below.

NOTE...do not put a blank cd in until burncdcc opens the tray for you
1. Start BurnCDCC
2. Browse to the ISO file you want to burn on cd/dvd ....in this case its memtest86.iso
3. Select the ISO file
4. click on Start
Make sure the bios is set for the cd drive as the first boot device
Put the cd in the cd drive and then boot your computer.

Running the Diagnostic Program:

The basic diagnostic screen has five main sections of relevant information. Three at the top which are labeled, PASS %, TEST %, and TEST #. This will basically show you the total progress of the current test, the overall progress of the diagnostic test, and the test number is currently performing.

On the middle left hand side of the of the program interface there is a “Wall Time” section that will keep track of how long the diagnostic test has been running for. This just gives you an idea if you are not attending the testing process.

The main section to look for is the lower half of the screen which is usually blank. As long as the memory testing is going ok with no errors this section of the screen should remain blank. If the diagnostic program finds any serious faults in the memory you will see it display a memory dump of address’s in this section. This is similar to what is displayed on your screen when you encounter a blue screen of death.

You now have most everything you need to know about setting up and testing your memory with diagnostic programs. This guide should help you get to the source of any intermittent problems related to your memory.

Run memtest for at least 2 hours:
If it starts showing any errors during that time then you will have to replace the memory
If there are no errors after 2 hours press Esc and that will end the tests
We will then try other options

[rshaffer61]

Hello hines9514.... Welcome to GeeksToGo,

I'm sorry to hear about your issue. We will try to help you resolve this as soon as possible.
Please understand we are all volunteers and we are not here all the time. Sometimes it may be a extended amount of time to get back to you. If it has been more then 3 days please shoot me a PM and I will try to get back to you quickly then.

It may be a hard drive or memory problem.

Run hard drive diagnostics: http://www.tacktech....ay.cfm?ttid=287
Make sure, you select tool, which is appropriate for the brand of your hard drive.
Depending on the program, it'll create bootable floppy, or bootable CD.
If downloaded file is of .iso type, use ImgBurn: http://www.imgburn.com/ to burn .iso file to a CD (select "Write image file to disc" option), and make the CD bootable.

NOTE. If your hard drive is made by Toshiba, unfortunately, you're out of luck, because Toshiba doesn't provide any diagnostic tool.

Thanks to Broni for the instructions

Once you have posted the results of the test then do the following.


Let's check your memory and make sure there is no issue with it. Download memtest86 from the link in my signature below.


Get the file that is named Download - The one you want is "Download - Pre-compiled Bootable ISO (.zip). When it downloads, it will be labeled memtest86+2.11.iso.zip
Unzip the file once you download it. You should have a .iso file in the unzipped directory. It will look like a zip file in some cases but the file name will now be memtest86+2.11.iso

if you don't have a burning program that will burn .ISO files get burncdcc in my signature below.

NOTE...do not put a blank cd in until burncdcc opens the tray for you
1. Start BurnCDCC
2. Browse to the ISO file you want to burn on cd/dvd ....in this case its memtest86.iso
3. Select the ISO file
4. click on Start
Make sure the bios is set for the cd drive as the first boot device
Put the cd in the cd drive and then boot your computer.

Running the Diagnostic Program:

The basic diagnostic screen has five main sections of relevant information. Three at the top which are labeled, PASS %, TEST %, and TEST #. This will basically show you the total progress of the current test, the overall progress of the diagnostic test, and the test number is currently performing.

On the middle left hand side of the of the program interface there is a “Wall Time” section that will keep track of how long the diagnostic test has been running for. This just gives you an idea if you are not attending the testing process.

The main section to look for is the lower half of the screen which is usually blank. As long as the memory testing is going ok with no errors this section of the screen should remain blank. If the diagnostic program finds any serious faults in the memory you will see it display a memory dump of address’s in this section. This is similar to what is displayed on your screen when you encounter a blue screen of death.

You now have most everything you need to know about setting up and testing your memory with diagnostic programs. This guide should help you get to the source of any intermittent problems related to your memory.

Run memtest for at least 2 hours:
If it starts showing any errors during that time then you will have to replace the memory
If there are no errors after 2 hours press Esc and that will end the tests
We will then try other options