[jdp57]

My computer will not boot. When I try to use the Windows XP disc and push r for repair or install windows I get a blue screen that says my windows is corrupt. I have tried pushing F8 at start up for safe mode but that does not work either.

[Advertisements]

Did you change the bootup sequence in the bios to make the cdrom first?

Repair Installation Instructions

· Insert your Windows XP CD in your CD-ROM and then Restart your computer.
· At the first post screen start tapping the Del key to enter System Bios
· Find the Advance Options or Boot Sequence screen.
· You will need to change the boot sequence so that the CDrom is first and the HD is second.
· Press F10 to Save and Exit and then press Enter to accept.
· The system will now reboot
· When the "Press any key to boot from CD" message is displayed on your screen, press a key to start your computer from the Windows XP CD.
· When you see the following message displayed on the Welcome to Setup screen, press ENTER
· To setup Windows XP now, press ENTER.
· At this point an option to press R to enter the Recovery Console is displayed. DO NOT SELECT THIS OPTION.

· On the Windows XP Licensing Agreement screen, press F8 to agree to the license agreement.
· Make sure that your current installation of Windows XP is selected and highlighted in the box, and then press the R key to repair Windows XP.
· Follow the instructions on the screen to complete Setup.

You can also go HERE
to read a step by step tutorial with screenshots.

[rshaffer61]

Did you change the bootup sequence in the bios to make the cdrom first?

Repair Installation Instructions

· Insert your Windows XP CD in your CD-ROM and then Restart your computer.
· At the first post screen start tapping the Del key to enter System Bios
· Find the Advance Options or Boot Sequence screen.
· You will need to change the boot sequence so that the CDrom is first and the HD is second.
· Press F10 to Save and Exit and then press Enter to accept.
· The system will now reboot
· When the "Press any key to boot from CD" message is displayed on your screen, press a key to start your computer from the Windows XP CD.
· When you see the following message displayed on the Welcome to Setup screen, press ENTER
· To setup Windows XP now, press ENTER.
· At this point an option to press R to enter the Recovery Console is displayed. DO NOT SELECT THIS OPTION.

· On the Windows XP Licensing Agreement screen, press F8 to agree to the license agreement.
· Make sure that your current installation of Windows XP is selected and highlighted in the box, and then press the R key to repair Windows XP.
· Follow the instructions on the screen to complete Setup.

You can also go HERE
to read a step by step tutorial with screenshots.

[jdp57]

Thank you for getting back so quickly. I did everything you said. When I get to the windows screen I hit load windows then F8 for the agreement and I get a blue screen that says windows is corrupt. I tried hitting r for repair and get the same thing.

This is what I get in the body of the message:

IRQL_NOT_LESS_EQUAL

On the bottom it states:

Stop:0x0000000A )0x0a270017,0x00000002,0x0000000,0x8081c636

Don't know if that helps.

[rshaffer61]

Run hard drive diagnostics: http://www.tacktech....ay.cfm?ttid=287
Make sure, you select tool, which is appropriate for the brand of your hard drive.
Depending on the program, it'll create bootable floppy, or bootable CD.
If downloaded file is of .iso type, use ImgBurn: http://www.imgburn.com/ to burn .iso file to a CD (select "Write image file to disc" option), and make the CD bootable.

NOTE. If your hard drive is made by Toshiba, unfortunately, you're out of luck, because Toshiba doesn't provide any diagnostic tool.

Thanks to Broni for the instructions

[jdp57]

I ran a hard drive diagnostics test this morning using the diagnostics that came with the computer. Is that the same?

When do I give in and take it to a shop? I am very concerned that I will lose my files. I made copies of everything except I have new videos of when my granddaughter was born!

By the way I had Norton system security loaded on this computer and up to last night had not detected any virus. Did it miss something?

Thanks again

[rshaffer61]

By the way I had Norton system security loaded on this computer and up to last night had not detected any virus. Did it miss something?

No AV is 100% going to catch everything.

I am very concerned that I will lose my files. I made copies of everything except I have new videos of when my granddaughter was born!

We can see if we can save these by doing the following...


Get Puppy Linux...Get puppy-2.16-seamonkey-fulldrivers.iso download it and burn it to cd
..
if you don't have a burning program that will burn .ISO files get Burncdcc from my signature...it is a small FAST no frills iso burning program...

NOTE...do not put a blank cd in until burncdcc opens the tray for you
1. Start BurnCDCC
2. Browse to the ISO file you want to burn on cd/dvd ....in this case its memtest86.iso
3. Select the ISO file
4. click on Start

make sure in the bios the cd drive is the first boot device....

put the cd in the cd drive..boot your computer....puppy will boot and run totally in ram...if your hardware is is good working order you will know...
after you get it running and your at the desktop...you take the puppy linux cd out and then you can use the burner to copy all your data to cd/dvds
you can also use it to backup your data to a external usb harddrive..just have it hooked to the computer when you boot up with puppy...

==========================
quick guide for saving data...music..files on a system that will not boot using puppy Linux..


after you get to puppy desktop..
click on the drives icon...looks like a flash drive...top row..it will list all the drives connected to

your computer...

click on the red icon for the drive you want to mount...in this case its a flash drive ...puppy will

mount the drive..the drive icon turns green when its mounted...
minimize the drives mounter window..you will need it again in a few minutes..
drag the right edge of it sideways to shrink it to its narrowest size...about half the width of the screen...then drag the window to the right edge of the screen...

now click on the icon that looks like a filing cabinet (kind of yellow) on the main drive...it should
already be green..
you will see a list of all the folders on the main drive Usually your C: drive..shrink that window to
the narrowest you can..about half the width of the screen...drag that window to the left side of the screen...
at this point you should have 2 windows open on your desktop..the flash drive on the right side..
go back to the folders on the C: drive...click on the documents and settings folder...then your user
name or all users..find the folders that has your data..
drag and drop the folder with the data you want to make copies of to the flash drive window...

your options are to move ..copy ect...JUST COPY..if its to big you will have to open the folder and
drag and drop individual files until the flash drive is full...(I have a 120 GB external USB drive for
big data recovery jobs and a 4 GB flash drive for the smaller jobs)..after you get the files copied to
the flash drive...
Click on the drives mounter you minimized earlier
UNMOUNT THE FLASH DRIVE by clicking on the green icon..you will once in awhile get error messages when
unmouting the drive..ignore them..when the flash drive icon turns red again its safe to remove the
flash drive..trot on over (stroll if you want to look cool) to another computer and plug in the flash

drive and copy all the data files ( I drag and drop) to the other computer..
make sure the other computer can read them...

now delete the data on the flash drive...take it back to the misbehaving computer and plug it in

again..click on the drives icon again and repeat until you have all your data transferred to the working
system..

Thanks to happyrock