Jump to content

Welcome to Geeks to Go - Register now for FREE

Geeks To Go is a helpful hub, where thousands of volunteer geeks quickly serve friendly answers and support. Check out the forums and get free advice from the experts. Register now to gain access to all of our features, it's FREE and only takes one minute. Once registered and logged in, you will be able to create topics, post replies to existing threads, give reputation to your fellow members, get your own private messenger, post status updates, manage your profile and so much more.

Create Account How it Works
Photo

CD-RW Drive Problem


  • Please log in to reply

#1
BlazeHeatnix

BlazeHeatnix

    Member

  • Member
  • PipPip
  • 39 posts
To start off..I got this computer from my brother because he bought a new one. One day, I wanted to burn a CD so I put a blank CD in, and it burned just fine, although it was running a little slow for a 52x speed. Anyway, the next day, I wanted to burn another CD, so I put it in the drive, attempted to burn it, and the process fails at around 8%. Just now having time, I decided to do a little research both here and on Google, and the only plausible solution I found was to update the firmware. I also read something about DMA settings, so I tried to change the DMA settings on the drive using Device Manager to whatever I could, and I also went into CMOS to change the DMA number, and once I tried to re-boot, it said it couldn't detect the drive, so I just changed it back to what it was previously. I went into Device Manager to find out that the name of my CD-RW drive is a Mitsumi CR-487ETE. I went to their website only to find that they have absolutely nothing on that model. Searched on Google some more and found a firmware upgrade so I went ahead and installed that. Restarted my computer - doesn't boot. Just hangs on the "Windows XP" screen with the scrolling bar. I made sure to make a system restore point in case something were to go wrong, so I took of my case, unplugged the CD-RW drive, and booted back up just fine. I did the system restore point, didn't work, went back to an earlier date, still didn't work. So, now...there are two hook-up's going to my CD-RW drive..one plastic piece that connects to another plastic piece which then connect to the drive, and a cable. For some reason, if those two plastic pieces are not connected, the fan for my processor does not work. Luckily, my computer will boot with those two plastic pieces connected and not the cable connected. Here's a log that I took from Nero whenever the burn process failed:

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 2:54:32 PM

NT-SPTI used
Nero Version: 6.6.1.6
Internal Version: 6, 6, 1, 6b
(Nero Express)
Recorder: <MITSUMI CR-487ETE> Version: 0019 - HA 1 TA 1 - 6.6.1.6
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <TOSHIBA DVD-ROM SD-M1202>Version: 1020 - HA 1 TA 0 - 6.6.1.6
Adapter driver: <IDE> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : ST3160815A atapi Port 0 ID 0 DMA: On
CdRomPeripheral : TOSHIBA DVD-ROM SD-M1202 atapi Port 1 ID 0 DMA: On
CdRomPeripheral : MITSUMI CR-487ETE atapi Port 1 ID 1 DMA: Off
CdRomPeripheral : ERAVOZ 2RS1A3WH6NW 1.03 afp5gprq Port 2 ID 0 DMA: Off

=== CDRom-Device-Map ===
TOSHIBA DVD-ROM SD-M1202 D: CDRom0
MITSUMI CR-487ETE E: CDRom1
ERAVOZ 2RS1A3WH6NW F: CDRom2
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1023MB (1048096kB)
Free physical memory: 434MB (445336kB)
Memory in use : 57 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

5.11.2009
Audio CD
9:13:57 PM #1 CDADOC -1 File Cdadoc.cpp, Line 1456
Audio item log info:
Audio document burn settings:
=============================
Burn mode: DAO,
CD Text: On,
Cache disk or network files: No,
Cache small files: No,
Cache files smaller than 65536 bytes.
Audio Multisession: No

9:13:57 PM #2 Text 0 File Burncd.cpp, Line 3012
MITSUMI CR-487ETE
ExacLink activated

9:13:57 PM #3 Text 0 File ThreadedTransfer.cpp, Line 531
ReadBuffer-Pipe got 81920KB of Memory

9:13:57 PM #4 Text 0 File Reader.cpp, Line 124
Reader running

9:13:57 PM #5 Text 0 File AudioCompilationImpl.cpp, Line 842
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.

9:13:57 PM #6 Text 0 File Writer.cpp, Line 122
Writer MITSUMI CR-487ETE running

9:13:58 PM #7 Text 0 File Burncd.cpp, Line 3305
Turn on Disc-At-Once, using CD-R/RW media

9:14:21 PM #8 Text 0 File DlgWaitCD.cpp, Line 281
Last possible write address on media: 359845 ( 79:59.70)
Last address to be written: 358863 ( 79:46.63)

9:14:21 PM #9 Text 0 File DlgWaitCD.cpp, Line 293
Write in overburning mode: NO (enabled: CD)

9:14:21 PM #10 Text 0 File DlgWaitCD.cpp, Line 2612
Recorder: MITSUMI CR-487ETE;
CDR code: 00 97 26 66; OSJ entry from: CMC Magnetics Corporation
ATIP Data:
Special Info [hex] 1: D0 00 98, 2: 61 1A 42 (LI 97:26.66), 3: 4F 3B 47 (LO 79:59.71)
Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 80 00 (invalid), 3: 00 80 80 (invalid)

9:14:21 PM #11 Text 0 File DlgWaitCD.cpp, Line 459
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: Unknown. Medium required by compilation: CD-R/RW.)

9:14:21 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_AUDIO_NOPRE
2 indices, index0 (150) not provided
original disc pos #0 + 15988 (15988) = #15988/3:33.13
relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_AUDIO_ULTRARAW96, 2448, config 0, wanted index0 0 blocks, length 15988 blocks [MITSUMI CR-487ETE]
1: TRM_AUDIO_NOPRE
2 indices, index0 (0) not provided
original disc pos #0 + 22998 (22998) = #22998/5:6.48
relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_AUDIO_ULTRARAW96, 2448, config 0, wanted index0 0 blocks, length 22998 blocks [MITSUMI CR-487ETE]
2: TRM_AUDIO_NOPRE
2 indices, index0 (0) not provided
original disc pos #0 + 19435 (19435) = #19435/4:19.10
relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_AUDIO_ULTRARAW96, 2448, config 0, wanted index0 0 blocks, length 19435 blocks [MITSUMI CR-487ETE]
3: TRM_AUDIO_NOPRE
2 indices, index0 (0) not provided
original disc pos #0 + 16506 (16506) = #16506/3:40.6
relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_AUDIO_ULTRARAW96, 2448, config 0, wanted index0 0 blocks, length 16506 blocks [MITSUMI CR-487ETE]
4: TRM_AUDIO_NOPRE
2 indices, index0 (0) not provided
original disc pos #0 + 16261 (16261) = #16261/3:36.61
relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_AUDIO_ULTRARAW96, 2448, config 0, wanted index0 0 blocks, length 16261 blocks [MITSUMI CR-487ETE]
5: TRM_AUDIO_NOPRE
2 indices, index0 (0) not provided
original disc pos #0 + 20493 (20493) = #20493/4:33.18
relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_AUDIO_ULTRARAW96, 2448, config 0, wanted index0 0 blocks, length 20493 blocks [MITSUMI CR-487ETE]
6: TRM_AUDIO_NOPRE
2 indices, index0 (0) not provided
original disc pos #0 + 16404 (16404) = #16404/3:38.54
relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_AUDIO_ULTRARAW96, 2448, config 0, wanted index0 0 blocks, length 16404 blocks [MITSUMI CR-487ETE]
7: TRM_AUDIO_NOPRE
2 indices, index0 (0) not provided
original disc pos #0 + 21547 (21547) = #21547/4:47.22
relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_AUDIO_ULTRARAW96, 2448, config 0, wanted index0 0 blocks, length 21547 blocks [MITSUMI CR-487ETE]
8: TRM_AUDIO_NOPRE
2 indices, index0 (0) not provided
original disc pos #0 + 16743 (16743) = #16743/3:43.18
relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_AUDIO_ULTRARAW96, 2448, config 0, wanted index0 0 blocks, length 16743 blocks [MITSUMI CR-487ETE]
9: TRM_AUDIO_NOPRE
2 indices, index0 (0) not provided
original disc pos #0 + 16974 (16974) = #16974/3:46.24
relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_AUDIO_ULTRARAW96, 2448, config 0, wanted index0 0 blocks, length 16974 blocks [MITSUMI CR-487ETE]
10: TRM_AUDIO_NOPRE
2 indices, index0 (0) not provided
original disc pos #0 + 17566 (17566) = #17566/3:54.16
relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_AUDIO_ULTRARAW96, 2448, config 0, wanted index0 0 blocks, length 17566 blocks [MITSUMI CR-487ETE]
11: TRM_AUDIO_NOPRE
2 indices, index0 (0) not provided
original disc pos #0 + 16398 (16398) = #16398/3:38.48
relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_AUDIO_ULTRARAW96, 2448, config 0, wanted index0 0 blocks, length 16398 blocks [MITSUMI CR-487ETE]
12: TRM_AUDIO_NOPRE
2 indices, index0 (0) not provided
original disc pos #0 + 18500 (18500) = #18500/4:6.50
relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_AUDIO_ULTRARAW96, 2448, config 0, wanted index0 0 blocks, length 18500 blocks [MITSUMI CR-487ETE]
13: TRM_AUDIO_NOPRE
2 indices, index0 (0) not provided
original disc pos #0 + 20175 (20175) = #20175/4:29.0
relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_AUDIO_ULTRARAW96, 2448, config 0, wanted index0 0 blocks, length 20175 blocks [MITSUMI CR-487ETE]
14: TRM_AUDIO_NOPRE
2 indices, index0 (0) not provided
original disc pos #0 + 13598 (13598) = #13598/3:1.23
relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_AUDIO_ULTRARAW96, 2448, config 0, wanted index0 0 blocks, length 13598 blocks [MITSUMI CR-487ETE]
15: TRM_AUDIO_NOPRE
2 indices, index0 (0) not provided
original disc pos #0 + 16215 (16215) = #16215/3:36.15
relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_AUDIO_ULTRARAW96, 2448, config 0, wanted index0 0 blocks, length 16215 blocks [MITSUMI CR-487ETE]
16: TRM_AUDIO_NOPRE
2 indices, index0 (0) not provided
original disc pos #0 + 14001 (14001) = #14001/3:6.51
relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_AUDIO_ULTRARAW96, 2448, config 0, wanted index0 0 blocks, length 14001 blocks [MITSUMI CR-487ETE]
17: TRM_AUDIO_NOPRE
2 indices, index0 (0) not provided
original disc pos #0 + 16529 (16529) = #16529/3:40.29
relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_AUDIO_ULTRARAW96, 2448, config 0, wanted index0 0 blocks, length 16529 blocks [MITSUMI CR-487ETE]
18: TRM_AUDIO_NOPRE
2 indices, index0 (0) not provided
original disc pos #0 + 14016 (14016) = #14016/3:6.66
relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_AUDIO_ULTRARAW96, 2448, config 0, wanted index0 0 blocks, length 14016 blocks [MITSUMI CR-487ETE]
19: TRM_AUDIO_NOPRE
2 indices, index0 (0) not provided
original disc pos #0 + 13357 (13357) = #13357/2:58.7
relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_AUDIO_ULTRARAW96, 2448, config 0, wanted index0 0 blocks, length 13357 blocks [MITSUMI CR-487ETE]
20: TRM_AUDIO_NOPRE
2 indices, index0 (0) not provided
original disc pos #0 + 15160 (15160) = #15160/3:22.10
relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_AUDIO_ULTRARAW96, 2448, config 0, wanted index0 0 blocks, length 15160 blocks [MITSUMI CR-487ETE]
--------------------------------------------------------------

9:14:21 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [MITSUMI CR-487ETE] for write in raw writing
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 21:
1: TRM_AUDIO_ULTRARAW96, 2448/0x00, FilePos 0 367200 39505824, ISRC ""
2: TRM_AUDIO_ULTRARAW96, 2448/0x00, FilePos 39505824 39505824 95804928, ISRC ""
3: TRM_AUDIO_ULTRARAW96, 2448/0x00, FilePos 95804928 95804928 143381808, ISRC ""
4: TRM_AUDIO_ULTRARAW96, 2448/0x00, FilePos 143381808 143381808 183788496, ISRC ""
5: TRM_AUDIO_ULTRARAW96, 2448/0x00, FilePos 183788496 183788496 223595424, ISRC ""
6: TRM_AUDIO_ULTRARAW96, 2448/0x00, FilePos 223595424 223595424 273762288, ISRC ""
7: TRM_AUDIO_ULTRARAW96, 2448/0x00, FilePos 273762288 273762288 313919280, ISRC ""
8: TRM_AUDIO_ULTRARAW96, 2448/0x00, FilePos 313919280 313919280 366666336, ISRC ""
9: TRM_AUDIO_ULTRARAW96, 2448/0x00, FilePos 366666336 366666336 407653200, ISRC ""
10: TRM_AUDIO_ULTRARAW96, 2448/0x00, FilePos 407653200 407653200 449205552, ISRC ""
11: TRM_AUDIO_ULTRARAW96, 2448/0x00, FilePos 449205552 449205552 492207120, ISRC ""
12: TRM_AUDIO_ULTRARAW96, 2448/0x00, FilePos 492207120 492207120 532349424, ISRC ""
13: TRM_AUDIO_ULTRARAW96, 2448/0x00, FilePos 532349424 532349424 577637424, ISRC ""
14: TRM_AUDIO_ULTRARAW96, 2448/0x00, FilePos 577637424 577637424 627025824, ISRC ""
15: TRM_AUDIO_ULTRARAW96, 2448/0x00, FilePos 627025824 627025824 660313728, ISRC ""
16: TRM_AUDIO_ULTRARAW96, 2448/0x00, FilePos 660313728 660313728 700008048, ISRC ""
17: TRM_AUDIO_ULTRARAW96, 2448/0x00, FilePos 700008048 700008048 734282496, ISRC ""
18: TRM_AUDIO_ULTRARAW96, 2448/0x00, FilePos 734282496 734282496 774745488, ISRC ""
19: TRM_AUDIO_ULTRARAW96, 2448/0x00, FilePos 774745488 774745488 809056656, ISRC ""
20: TRM_AUDIO_ULTRARAW96, 2448/0x00, FilePos 809056656 809056656 841754592, ISRC ""
21: TRM_AUDIO_ULTRARAW96, 2448/0x00, FilePos 841754592 841754592 878866272, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
-150 | lead-in | 0 | 0x01 | 0x00
-150 | 1 | 0 | 0x21 | 0x00
0 | 1 | 1 | 0x21 | 0x00
15988 | 2 | 0 | 0x21 | 0x00
15988 | 2 | 1 | 0x21 | 0x00
38986 | 3 | 0 | 0x21 | 0x00
38986 | 3 | 1 | 0x21 | 0x00
58421 | 4 | 0 | 0x21 | 0x00
58421 | 4 | 1 | 0x21 | 0x00
74927 | 5 | 0 | 0x21 | 0x00
74927 | 5 | 1 | 0x21 | 0x00
91188 | 6 | 0 | 0x21 | 0x00
91188 | 6 | 1 | 0x21 | 0x00
111681 | 7 | 0 | 0x21 | 0x00
111681 | 7 | 1 | 0x21 | 0x00
128085 | 8 | 0 | 0x21 | 0x00
128085 | 8 | 1 | 0x21 | 0x00
149632 | 9 | 0 | 0x21 | 0x00
149632 | 9 | 1 | 0x21 | 0x00
166375 | 10 | 0 | 0x21 | 0x00
166375 | 10 | 1 | 0x21 | 0x00
183349 | 11 | 0 | 0x21 | 0x00
183349 | 11 | 1 | 0x21 | 0x00
200915 | 12 | 0 | 0x21 | 0x00
200915 | 12 | 1 | 0x21 | 0x00
217313 | 13 | 0 | 0x21 | 0x00
217313 | 13 | 1 | 0x21 | 0x00
235813 | 14 | 0 | 0x21 | 0x00
235813 | 14 | 1 | 0x21 | 0x00
255988 | 15 | 0 | 0x21 | 0x00
255988 | 15 | 1 | 0x21 | 0x00
269586 | 16 | 0 | 0x21 | 0x00
269586 | 16 | 1 | 0x21 | 0x00
285801 | 17 | 0 | 0x21 | 0x00
285801 | 17 | 1 | 0x21 | 0x00
299802 | 18 | 0 | 0x21 | 0x00
299802 | 18 | 1 | 0x21 | 0x00
316331 | 19 | 0 | 0x21 | 0x00
316331 | 19 | 1 | 0x21 | 0x00
330347 | 20 | 0 | 0x21 | 0x00
330347 | 20 | 1 | 0x21 | 0x00
343704 | 21 | 0 | 0x21 | 0x00
343704 | 21 | 1 | 0x21 | 0x00
358864 | lead-out | 1 | 0x01 | 0x00

9:14:21 PM #14 Text 0 File SCSIPassThrough.cpp, Line 38
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

9:14:21 PM #15 Text 0 File SCSIPassThrough.cpp, Line 83
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

9:14:21 PM #16 Phase 36 File dlgbrnst.cpp, Line 1685
Burn process started at 52x (7,800 KB/s)

9:14:22 PM #17 Text 0 File ThreadedTransferInterface.cpp, Line 2707
Verifying disc position of item 0 (relocatable, no disc pos, no patch infos, orig at #0): write at #0

9:14:22 PM #18 Text 0 File ThreadedTransferInterface.cpp, Line 2707
Verifying disc position of item 1 (relocatable, no disc pos, no patch infos, orig at #0): write at #15988

9:14:22 PM #19 Text 0 File ThreadedTransferInterface.cpp, Line 2707
Verifying disc position of item 2 (relocatable, no disc pos, no patch infos, orig at #0): write at #38986

9:14:22 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2707
Verifying disc position of item 3 (relocatable, no disc pos, no patch infos, orig at #0): write at #58421

9:14:22 PM #21 Text 0 File ThreadedTransferInterface.cpp, Line 2707
Verifying disc position of item 4 (relocatable, no disc pos, no patch infos, orig at #0): write at #74927

9:14:22 PM #22 Text 0 File ThreadedTransferInterface.cpp, Line 2707
Verifying disc position of item 5 (relocatable, no disc pos, no patch infos, orig at #0): write at #91188

9:14:22 PM #23 Text 0 File ThreadedTransferInterface.cpp, Line 2707
Verifying disc position of item 6 (relocatable, no disc pos, no patch infos, orig at #0): write at #111681

9:14:22 PM #24 Text 0 File ThreadedTransferInterface.cpp, Line 2707
Verifying disc position of item 7 (relocatable, no disc pos, no patch infos, orig at #0): write at #128085

9:14:22 PM #25 Text 0 File ThreadedTransferInterface.cpp, Line 2707
Verifying disc position of item 8 (relocatable, no disc pos, no patch infos, orig at #0): write at #149632

9:14:22 PM #26 Text 0 File ThreadedTransferInterface.cpp, Line 2707
Verifying disc position of item 9 (relocatable, no disc pos, no patch infos, orig at #0): write at #166375

9:14:22 PM #27 Text 0 File ThreadedTransferInterface.cpp, Line 2707
Verifying disc position of item 10 (relocatable, no disc pos, no patch infos, orig at #0): write at #183349

9:14:22 PM #28 Text 0 File ThreadedTransferInterface.cpp, Line 2707
Verifying disc position of item 11 (relocatable, no disc pos, no patch infos, orig at #0): write at #200915

9:14:22 PM #29 Text 0 File ThreadedTransferInterface.cpp, Line 2707
Verifying disc position of item 12 (relocatable, no disc pos, no patch infos, orig at #0): write at #217313

9:14:22 PM #30 Text 0 File ThreadedTransferInterface.cpp, Line 2707
Verifying disc position of item 13 (relocatable, no disc pos, no patch infos, orig at #0): write at #235813

9:14:22 PM #31 Text 0 File ThreadedTransferInterface.cpp, Line 2707
Verifying disc position of item 14 (relocatable, no disc pos, no patch infos, orig at #0): write at #255988

9:14:22 PM #32 Text 0 File ThreadedTransferInterface.cpp, Line 2707
Verifying disc position of item 15 (relocatable, no disc pos, no patch infos, orig at #0): write at #269586

9:14:22 PM #33 Text 0 File ThreadedTransferInterface.cpp, Line 2707
Verifying disc position of item 16 (relocatable, no disc pos, no patch infos, orig at #0): write at #285801

9:14:22 PM #34 Text 0 File ThreadedTransferInterface.cpp, Line 2707
Verifying disc position of item 17 (relocatable, no disc pos, no patch infos, orig at #0): write at #299802

9:14:22 PM #35 Text 0 File ThreadedTransferInterface.cpp, Line 2707
Verifying disc position of item 18 (relocatable, no disc pos, no patch infos, orig at #0): write at #316331

9:14:22 PM #36 Text 0 File ThreadedTransferInterface.cpp, Line 2707
Verifying disc position of item 19 (relocatable, no disc pos, no patch infos, orig at #0): write at #330347

9:14:22 PM #37 Text 0 File ThreadedTransferInterface.cpp, Line 2707
Verifying disc position of item 20 (relocatable, no disc pos, no patch infos, orig at #0): write at #343704

9:14:22 PM #38 Text 0 File Mmc.cpp, Line 17267
StartDAO : CD-Text - On

9:14:22 PM #39 Text 0 File Mmc.cpp, Line 21936
Set BUFE: ExacLink -> ON

9:21:08 PM #40 SPTI -1135 File SCSIPassThrough.cpp, Line 289
E: CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1135)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 00 00 00 3C BC 00 00 1A 00 00 00
Sense Area: 0x71 00 03 00 00 00 00 0A 00 00 00 00 0C
Buffer x073e0000: Len xf8a0
0xDA FE 49 01 03 04 53 05 50 06 8D 07 55 04 60 06
0x80 0A 87 0C FF 0D 04 10 28 08 50 0A 58 09 F2 0A
0xA9 0F C1 10 99 0C CC 0D 03 08 5F 09 14 0B 9F 0C

9:21:08 PM #41 CDR -1135 File Writer.cpp, Line 311
Write error
E: MITSUMI CR-487ETE

9:21:08 PM #42 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

9:21:09 PM #43 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader

9:21:09 PM #44 Phase 38 File dlgbrnst.cpp, Line 1685
Burn process failed at 52x (7,800 KB/s)

9:21:09 PM #45 Text 0 File AudioCompilationImpl.cpp, Line 867
DRM: DRM burn session terminated.

9:21:09 PM #46 Text 0 File AudioCompilationImpl.cpp, Line 896
DRM: Closing entire DRM handling. Bye.


Existing drivers:
File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=9200 bytes, created 4/28/2009 2:20:06 PM
File 'Drivers\PXHELP20.SYS': Ver=3.00.83a, size=44944 bytes, created 4/28/2009 2:20:06 PM (Prassi/Veritas driver for win 2K)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)


So..I guess either the drive was just dead, or rather, the burner in it was dead, or I just FUBAR'd it.

Any help would be appreciated, thanks.

Edited by BlazeHeatnix, 16 November 2009 - 08:58 PM.

  • 0

Advertisements


#2
Germando

Germando

    Member

  • Member
  • PipPipPip
  • 166 posts
Updating firmware for a device can have bad outcomes sometimes...If the device does not have a way to reset the firmware to factory then you are out a drive.

G
  • 0

#3
BlazeHeatnix

BlazeHeatnix

    Member

  • Topic Starter
  • Member
  • PipPip
  • 39 posts
What do you mean by "If the device does not have a way to reset the firmware to factory?"
How would one go about finding that out?
  • 0

#4
BlazeHeatnix

BlazeHeatnix

    Member

  • Topic Starter
  • Member
  • PipPip
  • 39 posts
Anyone else have any input?
  • 0

#5
happyrock

happyrock

    Tech Moderator

  • Retired Staff
  • 9,285 posts
first...what is the make and model of your computer...
is the cd drive completely connected up at this point in time...
  • 0

#6
BlazeHeatnix

BlazeHeatnix

    Member

  • Topic Starter
  • Member
  • PipPip
  • 39 posts
Motherboard is an Asus A7V333-X. By model, I assume you want me to tell you that it is ATX? The CD-Drive is only partially hooked up; There are two connectors, a plastic one, and an actual cable. The computer will boot if I have the plastic pin connector connected with a wire that runs from the PSU to the pin connector and not the cable connected. If I unplug the plastic pin connector, the fan for the CPU does not operate, so that is all that is connected to the drive at this moment. The computer can not read the drive at this moment in time, however, I can still open and close the drive; just won't read CD's and it is not detected by neither Everest nor My Computer.
  • 0

#7
happyrock

happyrock

    Tech Moderator

  • Retired Staff
  • 9,285 posts
which connector is plugged into the drive...does it look like the one on the right, the EIDE...
also do you have a molex power cable hooked up...again on the right
  • 0

#8
BlazeHeatnix

BlazeHeatnix

    Member

  • Topic Starter
  • Member
  • PipPip
  • 39 posts
The larger connector (picture on the right) is what is currently hooked up to a plastic piece that seems permanently connected to the drive. The other smaller connector (which i don't believe is the same one that I have hooked up to my CD-RW Drive) is also hooked up, but rather, it is coming off the bottom of the plastic piece that appears to be perm. connected to the drive. The larger connector which is able to connect to the perm. connected plastic piece runs to the PSU, whereas the smaller connector that runs off the bottom of the perm. connected piece connects to a brown connector, which then leads directly into the CPU Cooling Fan housing.

As for the picture on the left, neither of those cables are currently connected to the drive because with the EIDE cable connected to the drive, the computer will not boot; it will just hang on the Windows XP screen with the blue loading bar.

I hope I am making sense.
  • 0

#9
happyrock

happyrock

    Tech Moderator

  • Retired Staff
  • 9,285 posts
your going to have to get a camera and give me a picture...
try a new ide cable
and this...

whereas the smaller connector that runs off the bottom of the perm. connected piece connects to a brown connector, which then leads directly into the CPU Cooling Fan housing

is wrong...the heatsink fan has to connect to the motherboard...on a 3 pin that's labeled CPU fan
  • 0






Similar Topics

0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users

As Featured On:

Microsoft Yahoo BBC MSN PC Magazine Washington Post HP