Edited by snooplove, 09 December 2009 - 10:12 AM.
Can i see the exact name of my motherboard?
Posted 09 December 2009 - 10:11 AM
Posted 09 December 2009 - 10:25 AM
If you want to find out what memory is compatible then Go to HERE and run the Crucial online scanner.
This will give you the exact memory configuration for your system.
You do not have to buy the memory from there, but write down the information and if you need assistance in purchasing the upgrade memory GTG can assist with suggestions also.
You can do this on both the laptop and the desktop.
Posted 09 December 2009 - 10:34 AM
Posted 09 December 2009 - 10:40 AM
Again i will ask you what is the make and model of the system you are wanting to put a new HD in to?
Is it a name brand system like Dell or HP?
If so then what is the model number?
Posted 09 December 2009 - 10:44 AM
When i say if hard disk is compatible i mean with motherboard not ram....
Also here is what i see in motherboard at everest:
Motherboard ID <DMI>
Motherboard Name Hewlett-Packard HP Compaq nc6120 (PG825EA#B1A)
Front Side Bus Properties
Bus Type Intel NetBurst
Bus Width 64-bit
Real Clock 133 MHz (QDR)
Effective Clock 533 MHz
Bandwidth 4265 MB/s
Memory Bus Properties
Bus Type DDR SDRAM
Bus Width 64-bit
Real Clock 167 MHz (DDR)
Effective Clock 333 MHz
Bandwidth 2666 MB/s
Chipset Bus Properties
Bus Type Intel Direct Media Interface
Posted 09 December 2009 - 11:06 AM
Hard Drives 30-, 40-, 60-, 80-GB 4200 rpm SMART
40-, 60-, 80-, 100-GB 5400 rpm SMART
Specs located HERE
Now is this the system you are trying to replace the HD in?
If so you need a IDE drive.
Posted 09 December 2009 - 11:28 AM
Posted 09 December 2009 - 11:30 AM
Posted 09 December 2009 - 11:32 AM
If so then open it up and see if you can find a model number on the motherboard. We don't close topics in this forum so you are safe to take your time.
Posted 12 December 2009 - 06:31 AM
Posted 13 December 2009 - 06:31 AM
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users