internal audio wiring issue
Started by
dauthimaster
, May 16 2005 09:02 PM
#16
Posted 17 May 2005 - 12:13 AM
#17
Posted 17 May 2005 - 12:18 AM
can it do a continuity check? example, put one lead on each end of a wire, does it beep or light up to show that signal is passing.
#18
Posted 17 May 2005 - 12:21 AM
yes it can do that
#19
Posted 17 May 2005 - 12:29 AM
OK, great. lets start with the left channel. put the leads into the connectors for left in and left out. I suspect they will show they are connected.
same then for right channel, then ground. its the ground I am most interested in...do the 2 ground leads have labeling, like for mic or line or something?
same then for right channel, then ground. its the ground I am most interested in...do the 2 ground leads have labeling, like for mic or line or something?
#20
Posted 17 May 2005 - 12:30 AM
i have it all hooked up as you instructed and im gonna go test it now.
#21
Posted 17 May 2005 - 12:31 AM
oops, didnt see that last one u just wrote, the grounds are exactly the same, even the same wire color. there is no way to distinguish between the two
#22
Posted 17 May 2005 - 12:35 AM
no labels, lol great. so do they test as connected?
#23
Posted 17 May 2005 - 12:46 AM
well...i already had it hooked up like u said to hook it up, and tried it, then saw ur other post, and it all works, so should i still test to see if it shows up as connected or not?
#24
Posted 17 May 2005 - 12:50 AM
its all working? great! I assumed you were just at the starting point of building a system. you have working audio for h/p, and the mic works too? if so, no need to go testing for continuity, it has been proven to be the case.
#25
Posted 17 May 2005 - 12:53 AM
awesome, thx for your help
#26
Posted 17 May 2005 - 12:55 AM
no problem, happy to help out.
Similar Topics
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users