Jump to content

Welcome to Geeks to Go - Register now for FREE

Geeks To Go is a helpful hub, where thousands of volunteer geeks quickly serve friendly answers and support. Check out the forums and get free advice from the experts. Register now to gain access to all of our features, it's FREE and only takes one minute. Once registered and logged in, you will be able to create topics, post replies to existing threads, give reputation to your fellow members, get your own private messenger, post status updates, manage your profile and so much more.

Create Account How it Works
Photo

buy or upgrade?


  • Please log in to reply

#1
BlazedSubzero88

BlazedSubzero88

    New Member

  • Member
  • Pip
  • 9 posts
I want to upgrade some things on my PC or look into buying a new one. It's a bit old but runs fine and I don't use it for hardcore gaming. I'm not looking to spend $500 in upgrades, just anything I can do for about $100-200 that would make it worth keeping. Any suggestions on what upgrades I should look into? Here are my specs. Thanks for any ideas.



CPU-Z TXT Report

CPU-Z version 1.53

Processors
-------------------------------------------------------------------------

Number of processors 1
Number of threads 1

APICs
-------------------------------------------------------------------------

Processor 0
-- Core 0
-- Thread 0 0

Processors Information
-------------------------------------------------------------------------

Processor 1 ID = 0
Number of cores 1 (max 1)
Number of threads 1 (max 1)
Name Intel Pentium 4
Codename Northwood
Specification Intel® Pentium® 4 CPU 2.00GHz
Package (platform ID) Socket 478 mPGA (0x2)
CPUID F.2.4
Extended CPUID F.2
Brand ID 9
Core Stepping B0
Technology 0.13 um
Core Speed 1999.9 MHz
Multiplier x FSB 20.0 x 100.0 MHz
Rated Bus speed 400.0 MHz
Stock frequency 2000 MHz
Instructions sets MMX, SSE, SSE2
L1 Data cache 8 KBytes, 4-way set associative, 64-byte line size
Trace cache 12 Kuops, 8-way set associative
L2 cache 512 KBytes, 8-way set associative, 64-byte line size
FID/VID Control no


Chipset
-------------------------------------------------------------------------

Northbridge Intel i845E rev. E0
Southbridge Intel 82801DB (ICH4) rev. 01
Graphic Interface AGP
AGP Revision 2.0
AGP Transfer Rate 4x
AGP SBA supported, enabled
Memory Type DDR
Memory Size 1024 MBytes
Memory Frequency 133.3 MHz (3:4)
CAS# latency (CL) 2.5
RAS# to CAS# delay (tRCD) 3
RAS# Precharge (tRP) 3
Cycle Time (tRAS) 6

Memory SPD
-------------------------------------------------------------------------

DIMM # 1
SMBus address 0x50
Memory type DDR
Manufacturer (ID) Micron Technology (2CFFFFFFFFFFFFFF)
Size 512 MBytes
Max bandwidth PC2100 (133 MHz)
Part number 8VDDT6464AG-265DB
Serial number 0D1DCE19
Manufacturing date Week 49/Year 05
Number of banks 1
Data width 64 bits
Correction None
Registered no
Buffered no
Nominal Voltage 2.50 Volts
EPP no
XMP no
JEDEC timings table CL-tRCD-tRP-tRAS-tRC @ frequency
JEDEC #1 2.0-2-2-5-0 @ 100 MHz
JEDEC #2 2.5-3-3-6-0 @ 133 MHz

DIMM # 2
SMBus address 0x51
Memory type DDR
Manufacturer (ID) Micron Technology (2CFFFFFFFFFFFFFF)
Size 512 MBytes
Max bandwidth PC2100 (133 MHz)
Part number 8VDDT6464AG-265DB
Serial number A4061DCD
Manufacturing date Week 09/Year 05
Number of banks 1
Data width 64 bits
Correction None
Registered no
Buffered no
Nominal Voltage 2.50 Volts
EPP no
XMP no
JEDEC timings table CL-tRCD-tRP-tRAS-tRC @ frequency
JEDEC #1 2.0-2-2-5-0 @ 100 MHz
JEDEC #2 2.5-3-3-6-0 @ 133 MHz
  • 0

Advertisements


#2
Neil Jones

Neil Jones

    Member 5k

  • Member
  • PipPipPipPipPipPipPipPip
  • 8,476 posts
Not worth upgrading if truth be told.
Save your money and put it towards a replacement system.
  • 0






Similar Topics

0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users

As Featured On:

Microsoft Yahoo BBC MSN PC Magazine Washington Post HP