[acute18]

i entered

primary ide master
device :hard disk

vendor
size 0mb
lba mode supported
block mode 16 sectors
pio mode 4
async dma multi word dma-2
ultra dma ultra dma-6
s.m.a.r.t : supported

[Advertisements]

i tried the disabled 4th realtek boot agent.like you said rshaffer61, and chaged to boot from hard drive to, , beep primary hard disk error still!!!!

[acute18]

i tried the disabled 4th realtek boot agent.like you said rshaffer61, and chaged to boot from hard drive to, , beep primary hard disk error still!!!!

[rshaffer61]

Considering your HD is not even being detected in the bios it sounds like it has failed.

[acute18]

so using a recovery cd wont work!!??

[123Runner]

Considering your HD is not even being detected in the bios it sounds like it has failed.

That was going to be my suggestion back on the 1st page.
If its not detected in bios, then its not there.

[123Runner]

The recovery CD will restore the laptop back to day 1.
If the drive is not seen by the recovery CD, then you will not re-load the OS and programs that came installed on it.

You could install another hard drive and then use the recovery. I do not know how difficult that is on your specific laptop.

[acute18]

yeh from the ide configeration on the bios setup its saying

: primary ide master not detected and secodary ide master atapti cdrom. so no dectetion there then. booohooo

[rshaffer61]

Replacement drive is needed. If you need help in locating a new hd let us know and we can do the research for you.

[123Runner]

If you want to go 1 step further you can try the manufacturers hard drive diagnostics.
Seeing as the laptop is a Fujitsu siemans, I suspect it might have a fujitsu drive.
Go to "hard drive diagnostics" in my signature and get the diagnostics.
You would boot from the cd. Again if the diagnostics can "see" the drive, then it will run its diagnostics.
I suspect that the drive won't be found.