Jump to content

Welcome to Geeks to Go - Register now for FREE

Geeks To Go is a helpful hub, where thousands of volunteer geeks quickly serve friendly answers and support. Check out the forums and get free advice from the experts. Register now to gain access to all of our features, it's FREE and only takes one minute. Once registered and logged in, you will be able to create topics, post replies to existing threads, give reputation to your fellow members, get your own private messenger, post status updates, manage your profile and so much more.

Create Account How it Works
Photo

BSoD Help! 0x0000007E (0xC0000005,0x0537009,0xF78A2508,0xF78A2204)


  • Please log in to reply

#1
Dylan0001

Dylan0001

    Member

  • Member
  • PipPip
  • 74 posts
Hello, I am coming from the malware removal forum, i was being helped to remove the worm.win32.netsky virus by Rorschach112 and after trying to run my computer in safe mode for one of the fix programs - combofix.exe - my computer failed to run in safe mode and rebooted itself, now whenever i try to run my computer in any form of safe mode, start windows normally mode and also last know good config mode it will not run and a BSoD appears for a split second... i used my camera to get a photo of it and here is the error code : 0x0000007E (0xC0000005,0x0537009,0xF78A2508,0xF78A2204)

Thanks
  • 0

Advertisements


#2
Broni

Broni

    Kraków my love :)

  • Member
  • PipPipPipPipPipPipPipPip
  • 12,300 posts
If you have Windows CD...(if you don't have Windows CD, scroll down)

1. Insert your Windows XP CD into your CD and assure that your CD-ROM drive is capable of booting the CD.
2. Once you have booted from CD, do NOT select the option that states: Press F2 to initiate the Automated System Recovery (ASR) tool.
You’re going to proceed until you see the following screen, at which point you will press the “R” key to enter the recovery console:

Posted Image

3. After you have selected the appropriate option from step two, you will be prompted to select a valid Windows installation (typically number 1).
Select the installation number, and hit Enter.
If there is an administrator password for the administrator account, enter it and hit Enter (if asked for the password, and you don't know it, you're out of luck).
You will be greeted with this screen, which indicates a recovery console at the ready:

Posted Image

4. There are eight commands you must enter in sequence to repair your problem..
NOTE. Make sure, you press Enter after each command. Make sure, all commands are exact, including "spaces".
These commands are as follows:

CD..
ATTRIB -H C:\boot.ini
ATTRIB -S C:\boot.ini
ATTRIB -R C:\boot.ini
del boot.ini
BOOTCFG /Rebuild


Note about the above command.
BOOTCFG /REBUILD command which searches for pre-existing installations of Windows XP and rebuilds sundry essential components of the Windows operating system, recompiles the BOOT.INI file and corrects a litany of common Windows errors.
It is very important that you do one or both of the following two things:
A.) Every Windows XP owner must use /FASTDETECT as OS Load Option when the rebuild process is finalizing.
B.) If you are the owner of a CPU featuring Intel’s XD or AMD’s NX buffer overflow protection, you must also use /NOEXECUTE=OPTIN as an OS Load Option.
For the Enter Load Identifier portion of this command, you should enter the name of the operating system you have installed.
If, for example, you are using Windows XP Home, you could type Microsoft Windows XP Home Edition for the identifier (it's not crucial, however what the name is, as long, as it's meaningful).
Here is your computer screen:

Posted Image

5. Following command verifies the integrity of the hard drive containing the Windows XP installation. While this step is not an essential function in our process, it’s still good to be sure that the drive is physically capable of running windows, in that it contains no bad sectors or other corruptions that might be the culprit:

CHKDSK /R

6. This last command writes a new boot sector to the hard drive and cleans up all the loose ends we created by rebuilding the BOOT.INI file and the system files. When the Windows Recovery Console asks you if you are Sure you want to write a new bootsector to the partition C: ? just hit “Y”, then Enter to confirm your decision:

FIXBOOT

7. It’s time to reboot your PC by typing
EXIT
and pressing Enter.

With any luck, your PC will boot successfully into Windows XP as if your various DLL, Hive, EXE and NTLDR errors never existed.



If you don't have Windows CD...
Download Windows Recovery Console: http://www.thecomput...om/files/rc.iso
Download, and install free Imgburn: http://www.imgburn.c...hp?act=download
Using Imgburn, burn rc.iso to a CD.
Boot to the CD...let it finish loading.
When the "Welcome to Setup" screen appears, press R to start the Recovery Console.
Then, follow instructions from Step #3 above.
  • 0

#3
Dylan0001

Dylan0001

    Member

  • Topic Starter
  • Member
  • PipPip
  • 74 posts
Will that be reformatting and wiping my computer clean? I do not wish to do that
  • 0

#4
Broni

Broni

    Kraków my love :)

  • Member
  • PipPipPipPipPipPipPipPip
  • 12,300 posts
No. The above procedure will rebuild boot files. It MAY make your computer bootable again.
  • 0

#5
Dylan0001

Dylan0001

    Member

  • Topic Starter
  • Member
  • PipPip
  • 74 posts
Ok thanks... U dnt have to worry about putting stuff like MAY in caps it's alright this is a free service I appreciate the help
  • 0

#6
Dylan0001

Dylan0001

    Member

  • Topic Starter
  • Member
  • PipPip
  • 74 posts
Thanks for the help.. i got the computer booting from the cd and got all the important information files and programs removed from my computer and am reformatting it... thankyou
  • 0

#7
Broni

Broni

    Kraków my love :)

  • Member
  • PipPipPipPipPipPipPipPip
  • 12,300 posts
Cool :)
  • 0

#8
Dylan0001

Dylan0001

    Member

  • Topic Starter
  • Member
  • PipPip
  • 74 posts
Now the product key won't work... It's 20 digit and the pc says 25 digit key??? I'm sure it's the xp certificate tho
  • 0

#9
Broni

Broni

    Kraków my love :)

  • Member
  • PipPipPipPipPipPipPipPip
  • 12,300 posts
Product ID is definitely 25 digit string
  • 0

#10
Dylan0001

Dylan0001

    Member

  • Topic Starter
  • Member
  • PipPip
  • 74 posts
Thanks For The Help... I Found The Code.....
Mark As Resolved Thankyou :)
  • 0

#11
Broni

Broni

    Kraków my love :)

  • Member
  • PipPipPipPipPipPipPipPip
  • 12,300 posts
Nice :)
  • 0

#12
improvepctools

improvepctools

    New Member

  • Member
  • Pip
  • 3 posts
Thanks for the solution, it helped
  • 0






Similar Topics

0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users

As Featured On:

Microsoft Yahoo BBC MSN PC Magazine Washington Post HP