Jump to content

Welcome to Geeks to Go - Register now for FREE

Geeks To Go is a helpful hub, where thousands of volunteer geeks quickly serve friendly answers and support. Check out the forums and get free advice from the experts. Register now to gain access to all of our features, it's FREE and only takes one minute. Once registered and logged in, you will be able to create topics, post replies to existing threads, give reputation to your fellow members, get your own private messenger, post status updates, manage your profile and so much more.

Create Account How it Works

xp starts to load and then it would load back off

  • Please log in to reply



    New Member

  • Member
  • Pip
  • 1 posts
to whon it may be of great help,
I turned my computer on this morning and when it asked for the password I typed it in as ussua, however it started to load on but the it chang directions and load off insted?? what is wrong with my computer it did have a lot of viruses but got ride of most of them but now it don't load up :)
  • 0





  • Moderator
  • 34,114 posts

it did have a lot of viruses but got ride of most of them

Probably still is infected first of all. Depending on the infection it may ahve messed up your usernit file and that is why you can't log in. Below is dorections for fixing it if you ahve a xp cd or if you don't.

Put your winxp cd in cd drive and reboot your system
When prompted to push any key to boot to cdrom then click a key
Click R to enter recovery console

Type the following

expand d:\i386\userinit.ex_ c:\windows\system32
click enter

Once it says 1 file copied
Then type exit and click enter
System will reboot
Make sure to remove winxp cd before it boots up and let it boot fully
Windows should start normally

If not post with result 

Wannabe1 userinit.exe fix

Give this a try. Without knowing a little more about what caused the problem, I can't guarantee it will work...and it requires the machine you make the disk on AND the machine you are fixing are both running XP.

Please download RC.ISO and save it somewhere you can find it.
Also download MagicISO.

Start MagicISO. You should see a window informing you about the full version of MagicISO.
In the bottom right select Try It! and the program will open.
Click on File and then on Open and navigate to the RC.ISO file you downloaded. Select it, and click Open.

First, we'll need to add a clean version of userinit.exe to the current RC.ISO

* In the upper right pane, double click on the i386 folder.
* Right click in the upper right pane and select Add Files...
* Navigate to C:\Windows\System32 and select userinit.exe
* Then click Open to add userinit.exe to the CD image.
* Click File and select Save As...
* Name the file RCplus and save it somewhere you can find it.

Next, we'll need to burn the newly created image to a disk that we can use to fix the problem.

* Put a blank CD-R disk in your CD burner and close the tray. If an AutoPlay window opens, close it.
* Click on Tools and select Burn CD/DVD with ISO.... A window will appear.
* Click on the little folder to the right of CD/DVD Image File then navigate to the newly created RCplus.iso Image file and click Open.
* In the CD/DVD Writing Speed drop-down menu choose the 8X setting.
* Under Format make sure that Mode 1 is selected.
* And finally, click on the Burn it! button to burn RCplus.iso to disk.

Once the disk is burned, put it in the machine you want to fix and restart it.
Boot to the CD just as you would with a Windows XP disk.
At the Welcome to Setup screen, press R to enter the Recovery Console.
Choose the installation to be repaired by number (usually 1) and press Enter.
When you are asked for the Administrator password, enter the password or leave it blank (default) and press Enter.

At the C:\Windows> prompt, type the following commands pressing Enter after each one. Note: Watch the spaces.

cd i386
copy userinit.exe c:\windows\system32

After putting in the third command, you should receive the message 1 file copied which will indicate that the operation succeeded.
Now take out the CD and reboot your computer to normal mode. Try to log in and it should let you back in.

Thanks to wannabe1
  • 0

Similar Topics

0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users

As Featured On:

Microsoft Yahoo BBC MSN PC Magazine Washington Post HP