Jump to content

Welcome to Geeks to Go - Register now for FREE

Need help with your computer or device? Want to learn new tech skills? You're in the right place!
Geeks to Go is a friendly community of tech experts who can solve any problem you have. Just create a free account and post your question. Our volunteers will reply quickly and guide you through the steps. Don't let tech troubles stop you. Join Geeks to Go now and get the support you need!

How it Works Create Account
Photo

windows xp boot problem


  • Please log in to reply

#1
dineshrao

dineshrao

    New Member

  • Member
  • Pip
  • 7 posts
Plz help me , i installed tune up utilities ,i changed my logon screen through tune up and then rebooted my pc now when i start xp a blank screen appears plz guide me ,what to do now.
  • 0

Advertisements


#2
rshaffer61

rshaffer61

    Moderator

  • Moderator
  • 34,114 posts
Where exactly is this blank screen?
At the log on screen or once windows actually starts?
You may need to do a system restore using the recovery option.
If you have your Windows XP disk
  • Insert your Windows XP disk into your computer and reboot
  • Make sure the PC is set to run from the CD as the primary boot device.
    NOTE: You do this by setting your PC to boot to the CD-ROM in BIOS (enter bios by pressing f1, f2 or del key during memory count up, then search for boot order, and set the CD as the first boot device)
  • When the PC boots, it will boot from the CD...after the first several screens load, you will be given a choice to choose R for Recovery Console. You will be asked to log in to the operating system to be repaired type the number corresponding to that operating system (usually 1).
    NOTE: For Windows XP Home, there is not password, just hit ENTER. For Windows XP pro, ask whomever set up the machine what password they used.
When you see the Recovery console C:\WINDOWS prompt continue to Section 3 ("System Restore")

If you DO NOT have your Windows XP disk

  • Please create a new folder on your hard drive called RecoveryDisk
  • Download recovery_console_cd.zip and unzip it to the newly created RecoveryDisk folder.
  • Download the correct floppy disk setup package for your operating system from Microsoft and save it to the RecoveryDisk folder;
    XP Home Original: Here
    XP Pro Original: Here
    XP Home SP1: Here
    XP Pro SP1: Here
    XP Home SP2: Here
    XP Pro SP2: Here
  • Rename the downloaded file to Bootdisk.exe
  • Double click the RecoveryCD.bat file and follow the instructions.
  • When you get asked if you want to burn a CD, type y and hit enter.
  • A pop-up should come up, please click on Close
This just created a file called XPRC.ISO which is located in the Recovery Disk folder.

Then please download MagicISO and install it.

Start MagicISO. You should see a window informing you about the full version of MagicISO.
In the bottom right select Try It! and the program will open.

Next, we'll need to burn the newly created image to a disk that we can use to fix the problem.
  • Put a blank CD-R disk in your CD burner and close the tray. If an AutoPlay window opens, close it.
  • Click on Tools and select Burn CD/DVD with ISO.... A window will appear.
  • Click on the little folder to the right of CD/DVD Image File then navigate to the newly created XPRC.ISO Image file and click Open.
  • In the CD/DVD Writing Speed drop-down menu choose the 8X setting.
  • Under Format make sure that Mode 1 is selected.
  • And finally, click on the Burn it! button to burn XPRC.ISO to disk.
Once the disk is burned, put it in the machine you want to fix and restart it.
Boot to the CD just as you would with a Windows XP disk.At the Welcome to Setup screen, press R to enter the Recovery Console.
Choose the installation to be repaired by number (usually 1) and press Enter.
When you are asked for the Administrator password, enter the password or leave it blank (default) and press Enter.

Section 3: System Restore

  • When you get to the recovery console prompt, type

    CD \

  • Press Enter
  • Type

    cd system~1\_resto~1

  • Press Enter
  • Type

    dir

  • Press Enter
After you press enter you will see a list of folders (like rp1, rp2) If the list of restore points has more than one page then press the Enter key untill you reach the end of the list
  • Type

    cd rp {number of the second to last folder in the list}

    Note: Example: cd rp9, if rp9 is the second to the last restore point where the last restore point no. is 10
  • Press Enter
  • Type

    cd snapshot

  • Press Enter
  • Type

    copy _registry_machine_system c:\windows\system32\config\system

  • Press Enter
  • Type

    copy _registry_machine_software c:\windows\system32\config\software

  • Press Enter
  • Type

    Exit

  • Press Enter
Your PC will reboot.

If you get an access denied error when doing the above, then do the following at the recovery console:

  • Type

    CD \

  • Press Enter
  • Type

    cd windows\system32\config

  • Press Enter
  • Type

    ren system system.bak

  • Press Enter
  • Type

    Exit

  • Press Enter
Your PC will reboot, go back into the Recovery Console and start from the beginning

If you still cannot get access in anyway to your installation in the recovery console then your SAM database files are corrupt. There is no way you can restore these with the recovery console. You may need to do a fresh install
  • 0

#3
dineshrao

dineshrao

    New Member

  • Topic Starter
  • Member
  • Pip
  • 7 posts
ok thanks for your big and detailed reply, but how could i create new folder without logging in
  • 0

#4
rshaffer61

rshaffer61

    Moderator

  • Moderator
  • 34,114 posts
Use the system you are typing to us on now to do the setup steps. Then once you have created the cd then use it on the problem system.
  • 0






Similar Topics

0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users

As Featured On:

Microsoft Yahoo BBC MSN PC Magazine Washington Post HP