Edited by Deanna H, 07 July 2010 - 03:28 PM.
Help using Emachine Restore CD
Started by
Deanna H
, Jul 07 2010 03:27 PM
#1
Posted 07 July 2010 - 03:27 PM
#2
Posted 08 July 2010 - 07:24 AM
you should just need to put the disk in the drive, reboot the computer, then wait for the prompt to press "any key" to boot from CD. press a key on the keyboard and it should boot from the CD.
if you don't get this prompt you may have to change your bios settings. during boot up, press f2 or del (usually. if it's not one of these two keys you'll see a prompt on the screen saying "press <something> to enter setup") then look for the boot order setting, change those settings so that the CD drive is the first device.
if you don't get this prompt you may have to change your bios settings. during boot up, press f2 or del (usually. if it's not one of these two keys you'll see a prompt on the screen saying "press <something> to enter setup") then look for the boot order setting, change those settings so that the CD drive is the first device.
#3
Posted 09 July 2010 - 07:59 AM
Thanks for the help, I managed to figure it out, now the hard part lol, showing my gramma how to use it!
Similar Topics
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users