Keep getting BSOD
Started by
Bismillah
, Sep 17 2010 05:18 AM
#1
Posted 17 September 2010 - 05:18 AM
Bismillah
-
- Member
-
- 514 posts
Member
#2
Posted 17 September 2010 - 05:21 AM
rshaffer61
-
- Moderator
-
- 34,114 posts
Moderator
i think it is to do with my physical memory im not sure
Then lets test the memory first.
If you have more than one RAM module installed, try starting computer with one RAM stick at a time.
NOTE Keep in mind, the manual check listed above is always superior to the software check, listed below. DO NOT proceed with memtest, if you can go with option A
B. If you have only one RAM stick installed...
...run memtest...
1. Download - Pre-Compiled Bootable ISO (.zip)
2. Unzip downloaded memtest86+-2.11.iso.zip file.
3. Inside, you'll find memtest86+-2.11.iso file.
4. Download, and install ImgBurn: http://www.imgburn.com/
5. Insert blank CD into your CD drive.
6. Open ImgBurn, and click on Write image file to disc
7. Click on Browse for a file... icon:
8. Locate memtest86+-2.11.iso file, and click Open button.
9. Click on ImgBurn green arrow to start burning bootable memtest86 CD:
10. Once the CD is created, boot from it, and memtest will automatically start to run. You may have to change the boot sequence in your BIOS to make it work right.
To change Boot Sequence in your BIOS
Reboot the system and at the first post screen (where it is counting up memory) start tapping the DEL button
This will enter you into the Bios\Cmos area.
Find the Advanced area and click Enter
Look for Boot Sequence or Boot Options and highlight that click Enter
Now highlight the first drive and follow the directions on the bottom of the screen on how to modify it and change it to CDrom.
Change the second drive to the C or Main Drive
Once that is done then click F10 to Save and Exit
You will prompted to enter Y to verify Save and Exit. Click Y and the system will now reboot with the new settings.
The running program will look something like this depending on the size and number of ram modules installed:
It's recommended to run 5-6 passes. Each pass contains very same 8 tests.
This will show the progress of the test. It can take a while. Be patient, or leave it running overnight.
The following image is the test results area:
The most important item here is the errors line. If you see ANY errors, even one, most likely, you have bad RAM.
#3
Posted 17 September 2010 - 06:23 AM
Bismillah
- Topic Starter
-
- Member
-
- 514 posts
Member
i dont have a spare disc 
i will try and get hold of one the bsods are not constant they happen randomly sometimes i get 2 - 3 a day sometimes none
i will try and get hold of one the bsods are not constant they happen randomly sometimes i get 2 - 3 a day sometimes none
Edited by nortan360, 17 September 2010 - 06:25 AM.
#4
Posted 17 September 2010 - 07:05 AM
rshaffer61
-
- Moderator
-
- 34,114 posts
Moderator
Please follow the steps below to enter the Event Viewer program in Vista. This will give me more information into what is causing your issue. You can get to Event viewer two ways and I will post both for you.
Method One
Go to
Start
In the Search box type in Event Viewer in the search box and press Enter
From this point you can follow from step four from the below method as they will be the same.
Method Two
Go to Start
Right click on the Computer Icon and select Manage
Navigate to the Event Viewer, You will be prompted to accept the action you are going to perform. Click continue
On the left window pane click on Local and then expand the Windows entry. This will allow you to see every error for the past 24 hours as well as the last 7 days in the right window pane.
Look for the ones that correspond to the times that your issue occurred.
If any are found please double click and expand the error. This will open and give you more information on the error.
Please include that in your next reply.
Method One
Go to
Start
In the Search box type in Event Viewer in the search box and press Enter
From this point you can follow from step four from the below method as they will be the same.
Method Two
Go to Start
Right click on the Computer Icon and select Manage
Navigate to the Event Viewer, You will be prompted to accept the action you are going to perform. Click continue
On the left window pane click on Local and then expand the Windows entry. This will allow you to see every error for the past 24 hours as well as the last 7 days in the right window pane.
Look for the ones that correspond to the times that your issue occurred.
If any are found please double click and expand the error. This will open and give you more information on the error.
Please include that in your next reply.
#5
Posted 17 September 2010 - 10:56 AM
Bismillah
- Topic Starter
-
- Member
-
- 514 posts
Member
i cant recall the exact time so i will paste here the last few errors
Log Name: Application
Source: Microsoft-Windows-WMI
Date: 17/09/2010 10:38:02
Event ID: 10
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: LENOVO-PC
Description:
Event filter with query "SELECT * FROM __InstanceModificationEvent WITHIN 60 WHERE TargetInstance ISA "Win32_Processor" AND TargetInstance.LoadPercentage > 99" could not be reactivated in namespace "//./root/CIMV2" because of error 0x80041003. Events cannot be delivered through this filter until the problem is corrected.
Event Xml:
<Event xmlns="http://schemas.micro.../events/event">
<System>
<Provider Name="Microsoft-Windows-WMI" Guid="{1edeee53-0afe-4609-b846-d8c0b2075b1f}" EventSourceName="WinMgmt" />
<EventID Qualifiers="49152">10</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2010-09-17T09:38:02.000Z" />
<EventRecordID>3093</EventRecordID>
<Correlation />
<Execution ProcessID="0" ThreadID="0" />
<Channel>Application</Channel>
<Computer>LENOVO-PC</Computer>
<Security />
</System>
<EventData>
<Data>//./root/CIMV2</Data>
<Data>SELECT * FROM __InstanceModificationEvent WITHIN 60 WHERE TargetInstance ISA "Win32_Processor" AND TargetInstance.LoadPercentage > 99</Data>
<Data>0x80041003</Data>
</EventData>
</Event>
Log Name: Application
Source: Application Error
Date: 16/09/2010 15:27:17
Event ID: 1000
Task Category: (100)
Level: Error
Keywords: Classic
User: N/A
Computer: LENOVO-PC
Description:
Faulting application iexplore.exe, version 8.0.6001.18943, time stamp 0x4c25813d, faulting module Flash10a.ocx, version 10.0.12.36, time stamp 0x48e83175, exception code 0xc0000005, fault offset 0x001d8331, process id 0x1ec8, application start time 0x01cb558cbe57a578.
Event Xml:
<Event xmlns="http://schemas.micro.../events/event">
<System>
<Provider Name="Application Error" />
<EventID Qualifiers="0">1000</EventID>
<Level>2</Level>
<Task>100</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2010-09-16T14:27:17.000Z" />
<EventRecordID>3036</EventRecordID>
<Channel>Application</Channel>
<Computer>LENOVO-PC</Computer>
<Security />
</System>
<EventData>
<Data>iexplore.exe</Data>
<Data>8.0.6001.18943</Data>
<Data>4c25813d</Data>
<Data>Flash10a.ocx</Data>
<Data>10.0.12.36</Data>
<Data>48e83175</Data>
<Data>c0000005</Data>
<Data>001d8331</Data>
<Data>1ec8</Data>
<Data>01cb558cbe57a578</Data>
</EventData>
</Event>
Log Name: Application
Source: Microsoft-Windows-WMI
Date: 16/09/2010 10:54:20
Event ID: 10
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: LENOVO-PC
Description:
Event filter with query "SELECT * FROM __InstanceModificationEvent WITHIN 60 WHERE TargetInstance ISA "Win32_Processor" AND TargetInstance.LoadPercentage > 99" could not be reactivated in namespace "//./root/CIMV2" because of error 0x80041003. Events cannot be delivered through this filter until the problem is corrected.
Event Xml:
<Event xmlns="http://schemas.micro.../events/event">
<System>
<Provider Name="Microsoft-Windows-WMI" Guid="{1edeee53-0afe-4609-b846-d8c0b2075b1f}" EventSourceName="WinMgmt" />
<EventID Qualifiers="49152">10</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2010-09-16T09:54:20.000Z" />
<EventRecordID>3005</EventRecordID>
<Correlation />
<Execution ProcessID="0" ThreadID="0" />
<Channel>Application</Channel>
<Computer>LENOVO-PC</Computer>
<Security />
</System>
<EventData>
<Data>//./root/CIMV2</Data>
<Data>SELECT * FROM __InstanceModificationEvent WITHIN 60 WHERE TargetInstance ISA "Win32_Processor" AND TargetInstance.LoadPercentage > 99</Data>
<Data>0x80041003</Data>
</EventData>
</Event>
Log Name: Application
Source: Microsoft-Windows-WMI
Date: 17/09/2010 10:38:02
Event ID: 10
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: LENOVO-PC
Description:
Event filter with query "SELECT * FROM __InstanceModificationEvent WITHIN 60 WHERE TargetInstance ISA "Win32_Processor" AND TargetInstance.LoadPercentage > 99" could not be reactivated in namespace "//./root/CIMV2" because of error 0x80041003. Events cannot be delivered through this filter until the problem is corrected.
Event Xml:
<Event xmlns="http://schemas.micro.../events/event">
<System>
<Provider Name="Microsoft-Windows-WMI" Guid="{1edeee53-0afe-4609-b846-d8c0b2075b1f}" EventSourceName="WinMgmt" />
<EventID Qualifiers="49152">10</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2010-09-17T09:38:02.000Z" />
<EventRecordID>3093</EventRecordID>
<Correlation />
<Execution ProcessID="0" ThreadID="0" />
<Channel>Application</Channel>
<Computer>LENOVO-PC</Computer>
<Security />
</System>
<EventData>
<Data>//./root/CIMV2</Data>
<Data>SELECT * FROM __InstanceModificationEvent WITHIN 60 WHERE TargetInstance ISA "Win32_Processor" AND TargetInstance.LoadPercentage > 99</Data>
<Data>0x80041003</Data>
</EventData>
</Event>
Log Name: Application
Source: Application Error
Date: 16/09/2010 15:27:17
Event ID: 1000
Task Category: (100)
Level: Error
Keywords: Classic
User: N/A
Computer: LENOVO-PC
Description:
Faulting application iexplore.exe, version 8.0.6001.18943, time stamp 0x4c25813d, faulting module Flash10a.ocx, version 10.0.12.36, time stamp 0x48e83175, exception code 0xc0000005, fault offset 0x001d8331, process id 0x1ec8, application start time 0x01cb558cbe57a578.
Event Xml:
<Event xmlns="http://schemas.micro.../events/event">
<System>
<Provider Name="Application Error" />
<EventID Qualifiers="0">1000</EventID>
<Level>2</Level>
<Task>100</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2010-09-16T14:27:17.000Z" />
<EventRecordID>3036</EventRecordID>
<Channel>Application</Channel>
<Computer>LENOVO-PC</Computer>
<Security />
</System>
<EventData>
<Data>iexplore.exe</Data>
<Data>8.0.6001.18943</Data>
<Data>4c25813d</Data>
<Data>Flash10a.ocx</Data>
<Data>10.0.12.36</Data>
<Data>48e83175</Data>
<Data>c0000005</Data>
<Data>001d8331</Data>
<Data>1ec8</Data>
<Data>01cb558cbe57a578</Data>
</EventData>
</Event>
Log Name: Application
Source: Microsoft-Windows-WMI
Date: 16/09/2010 10:54:20
Event ID: 10
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: LENOVO-PC
Description:
Event filter with query "SELECT * FROM __InstanceModificationEvent WITHIN 60 WHERE TargetInstance ISA "Win32_Processor" AND TargetInstance.LoadPercentage > 99" could not be reactivated in namespace "//./root/CIMV2" because of error 0x80041003. Events cannot be delivered through this filter until the problem is corrected.
Event Xml:
<Event xmlns="http://schemas.micro.../events/event">
<System>
<Provider Name="Microsoft-Windows-WMI" Guid="{1edeee53-0afe-4609-b846-d8c0b2075b1f}" EventSourceName="WinMgmt" />
<EventID Qualifiers="49152">10</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2010-09-16T09:54:20.000Z" />
<EventRecordID>3005</EventRecordID>
<Correlation />
<Execution ProcessID="0" ThreadID="0" />
<Channel>Application</Channel>
<Computer>LENOVO-PC</Computer>
<Security />
</System>
<EventData>
<Data>//./root/CIMV2</Data>
<Data>SELECT * FROM __InstanceModificationEvent WITHIN 60 WHERE TargetInstance ISA "Win32_Processor" AND TargetInstance.LoadPercentage > 99</Data>
<Data>0x80041003</Data>
</EventData>
</Event>
#6
Posted 17 September 2010 - 01:49 PM
rshaffer61
-
- Moderator
-
- 34,114 posts
Moderator
Go to
Start and then to Run
Type in Chkdsk /r Note the space between k and /
Click Enter ...It will probably ask if you want to do this on the next reboot...click Y
If the window doesn't shutdown on its own then reboot the system manually. On reboot the system will start the chkdsk operation
This one will take longer then chkdsk /f
Note... there are 5 stages...
It may appear to hang at a certain percent for a hour or more or even back up and go over the same area...this is normal...
DO NOT SHUT YOUR COMPUTER DOWN WHILE CHKDSK IS RUNNING OR YOU CAN HAVE SEVERE PROBLEMS
This can take several hours to complete.
When completed it will boot the system back into windows.
Let me know if this fixes the problem
Start and then to Run
Type in Chkdsk /r Note the space between k and /
Click Enter ...It will probably ask if you want to do this on the next reboot...click Y
If the window doesn't shutdown on its own then reboot the system manually. On reboot the system will start the chkdsk operation
This one will take longer then chkdsk /f
Note... there are 5 stages...
It may appear to hang at a certain percent for a hour or more or even back up and go over the same area...this is normal...
DO NOT SHUT YOUR COMPUTER DOWN WHILE CHKDSK IS RUNNING OR YOU CAN HAVE SEVERE PROBLEMS
This can take several hours to complete.
When completed it will boot the system back into windows.
Let me know if this fixes the problem
#7
Posted 19 September 2010 - 05:42 PM
Bismillah
- Topic Starter
-
- Member
-
- 514 posts
Member
Hey sorry ive been on holiday i will do this as soon as possible then post the results
#8
Posted 19 September 2010 - 07:43 PM
rshaffer61
-
- Moderator
-
- 34,114 posts
Moderator
Np just got back to the computer myself. No hurry and I will watch for your post.
Similar Topics
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users
As Featured On:
Sign In
Create Account
