Jump to content

Welcome to Geeks to Go - Register now for FREE

Geeks To Go is a helpful hub, where thousands of volunteer geeks quickly serve friendly answers and support. Check out the forums and get free advice from the experts. Register now to gain access to all of our features, it's FREE and only takes one minute. Once registered and logged in, you will be able to create topics, post replies to existing threads, give reputation to your fellow members, get your own private messenger, post status updates, manage your profile and so much more.

Create Account How it Works
Photo

NTLDR is missing


  • Please log in to reply

#1
mtiggs

mtiggs

    Member

  • Member
  • PipPip
  • 12 posts
I got a computer running xp, it was also partitioned with Linux, so my friend thinking hes a techie deleted the linux partition, and I restarted my computer and I know have a NTDLR is missing message and it says press ctrl alt delete to restart. We tried to repair with an xp disk, but it was scratched, much help would be very appreciated
  • 0

Advertisements


#2
rshaffer61

rshaffer61

    Moderator

  • Moderator
  • 34,114 posts
If you have Windows CD...

1. Insert your Windows XP CD into your CD and assure that your CD-ROM drive is capable of booting the CD.
2. Once you have booted from CD, do NOT select the option that states: Press F2 to initiate the Automated System Recovery (ASR) tool.
You’re going to proceed until you see the following screen, at which point you will press the “R” key to enter the recovery console:

Posted Image

3. After you have selected the appropriate option from step two, you will be prompted to select a valid Windows installation (typically number “1").
Select the installation number, and hit Enter.
If there is an administrator password for the administrator account, enter it and hit Enter (if asked for the password, and you don't know it, you're out of luck).
You will be greeted with this screen, which indicates a recovery console at the ready:

Posted Image

4. There are eight commands you must enter in sequence to repair any of the issues I noted in the opening of this guide.
I will introduce them here, and then show the results graphically in the next six steps.
NOTE. Make sure, you press Enter after each command. Make sure, all commands are exact, including "spaces".
These commands are as follows:

CD..
ATTRIB -H C:\boot.ini
ATTRIB -S C:\boot.ini
ATTRIB -R C:\boot.ini
del boot.ini
BOOTCFG /Rebuild


Note about the above command.
BOOTCFG /REBUILD command which searches for pre-existing installations of Windows XP and rebuilds sundry essential components of the Windows operating system, recompiles the BOOT.INI file and corrects a litany of common Windows errors.
It is very important that you do one or both of the following two things:
A.) Every Windows XP owner must use /FASTDETECT as OS Load Option when the rebuild process is finalizing.
B.) If you are the owner of a CPU featuring Intel’s XD or AMD’s NX buffer overflow protection, you must also use /NOEXECUTE=OPTIN as an OS Load Option.
For the Enter Load Identifier portion of this command, you should enter the name of the operating system you have installed.
If, for example, you are using Windows XP Home, you could type Microsoft Windows XP Home Edition for the identifier (it's not crucial, however what the name is, as long, as it's meaningful).
Here is your computer screen:

Posted Image

5. Following command verifies the integrity of the hard drive containing the Windows XP installation. While this step is not an essential function in our process, it’s still good to be sure that the drive is physically capable of running windows, in that it contains no bad sectors or other corruptions that might be the culprit:

CHKDSK /R

6. This last command writes a new boot sector to the hard drive and cleans up all the loose ends we created by rebuilding the BOOT.INI file and the system files. When the Windows Recovery Console asks you if you are Sure you want to write a new bootsector to the partition C: ? just hit “Y”, then Enter to confirm your decision:

FIXBOOT

7. It’s time to reboot your PC by typing
EXIT
and pressing Enter.

With any luck, your PC will boot successfully into Windows XP as if your various DLL, Hive, EXE and NTLDR errors never existed.



2. If you don't have Windows CD...
Download Windows Recovery Console: http://www.thecomput...om/files/rc.iso
Download, and install free Imgburn: http://www.imgburn.c...hp?act=download
Using Imgburn, burn rc.iso to a CD.
Boot to the CD...let it finish loading.
When the "Welcome to Setup" screen appears, press R to start the Recovery Console.
Then, follow instructions from Step #3 above.

Thanks To Broni For The Instructions
  • 0

#3
mtiggs

mtiggs

    Member

  • Topic Starter
  • Member
  • PipPip
  • 12 posts
thank you very much... we fixed it after 5 hours of trying
  • 0

#4
rshaffer61

rshaffer61

    Moderator

  • Moderator
  • 34,114 posts
Resolved with the steps I gave or some other way?
Your resolution could possibly help someone else with the same issue later. :D
  • 0

#5
mtiggs

mtiggs

    Member

  • Topic Starter
  • Member
  • PipPip
  • 12 posts
well... the xp cd wouldn't load, so we unplugged the power for the hard drive and booted from cd, then it workd, we plugged in the drive and repaired it. thank you very much for helping us out!
  • 0

#6
rshaffer61

rshaffer61

    Moderator

  • Moderator
  • 34,114 posts
Congratulations. ;) for a successful resolution for your issue.

You are very welcome. I'm glad we could help and please let us know how everything works out for you.
If there is anything else we can do to help please feel free to ask. I appreciate that you allowed me to assist you with your issue and for your patience.
Thank you for choosing GeeksToGo for help. :D ;)
This issue now appears to be resolved.
  • 0






Similar Topics

0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users

As Featured On:

Microsoft Yahoo BBC MSN PC Magazine Washington Post HP