Jump to content

Welcome to Geeks to Go - Register now for FREE

Need help with your computer or device? Want to learn new tech skills? You're in the right place!
Geeks to Go is a friendly community of tech experts who can solve any problem you have. Just create a free account and post your question. Our volunteers will reply quickly and guide you through the steps. Don't let tech troubles stop you. Join Geeks to Go now and get the support you need!

How it Works Create Account
Photo

Blue Screen


  • This topic is locked This topic is locked

#1
LSEactuary

LSEactuary

    Member

  • Member
  • PipPip
  • 79 posts
Hi,

I had a virus on my computer and ran Maleware bytes once. It came up with 21 viruses and so I removed all of them and it said to restart so I did. The when it was restarting it went straight to a blue screen with white writing that said the following:

A problem has been detected and windows has been shut down to prevent damage to your computer.

If this is the first time you've seen this Stop error screen, restart your computer. If this screen apeaprs again, follow these steps:

Check for viruses on your computer. Remove any newly installed hard drives or hard drive controllers. Check your hard drive to make sure it is properly configured and terminated. Run CHKDSK/F to check for hard drive corruption, and then restart your computer.

Technical Information:

*** STOP: 0x0000007B (0xBA4C7524, 0xc0000034, 0x00000000, 0x00000000)

What do I do? I cannot seem to log into Safe mode either (this screen comes up) when i press F8 either. I can, however, get into the recovery console. Btw I dont have a recovery CD - everything came pre-installed.

Thanks in advance! :D

Edited by LSEactuary, 13 November 2010 - 11:55 AM.

  • 0

Advertisements


#2
LSEactuary

LSEactuary

    Member

  • Topic Starter
  • Member
  • PipPip
  • 79 posts
Anyone?
  • 0

#3
LSEactuary

LSEactuary

    Member

  • Topic Starter
  • Member
  • PipPip
  • 79 posts
Please help me ......
  • 0

#4
LSEactuary

LSEactuary

    Member

  • Topic Starter
  • Member
  • PipPip
  • 79 posts
anyone?
  • 0

#5
LSEactuary

LSEactuary

    Member

  • Topic Starter
  • Member
  • PipPip
  • 79 posts
Btw I cannot log into windows on my computer and hence i cannot post any logs.
I can get into the recovery console but thats about it (i cant access safe mode either!)
  • 0

#6
LSEactuary

LSEactuary

    Member

  • Topic Starter
  • Member
  • PipPip
  • 79 posts
????????????????????????????????????
  • 0

#7
LSEactuary

LSEactuary

    Member

  • Topic Starter
  • Member
  • PipPip
  • 79 posts
Ive been through http://www.geekstogo...ystem-tutorial/ and its not worked.
  • 0

#8
Elise

Elise

    Emsisoft Research

  • Expert
  • 3,389 posts
Hi there, is this XP and do you have an XP cd at hand?
  • 0

#9
LSEactuary

LSEactuary

    Member

  • Topic Starter
  • Member
  • PipPip
  • 79 posts
Yes - it's the XP home edition.
Unfortunately everything came pre-installed so I have no disc or anything. I tried contacting the manufacturer and they said to go to PC world and they said to go to the manufacturer etc. Anyway eventually I got a reply that they dont do recovery CDs for my computer and I'll had to pay about £200 for a repair if I wanted to. Crazy money!
  • 0

#10
Elise

Elise

    Emsisoft Research

  • Expert
  • 3,389 posts
That is indeed a total rip-off. :D

Try this please. You will need a USB drive.

Download GETxPUD.exe to the desktop of your clean computer
  • Run GETxPUD.exe
  • A new folder will appear on the desktop.
  • Open the GETxPUD folder and click on the get&burn.bat
  • The program will download xpud_0.9.2.iso, and upon finished will open BurnCDCC ready to burn the image.
  • Click on Start and follow the prompts to burn the image to a CD.
  • Next download driver.sh to your USB drive
  • Remove the USB & CD and insert it in the sick computer
  • Boot the Sick computer with the CD you just burned
  • The computer must be set to boot from the CD
  • Gently tap F12 and choose to boot from the CD
  • Follow the prompts
  • A Welcome to xPUD screen will appear
  • Press File
  • Expand mnt
  • sda1,2...usually corresponds to your HDD
  • sdb1 is likely your USB
  • Click on the folder that represents your USB drive (sdb1 ?)
  • Confirm that you see driver.sh that you downloaded there
  • Press Tool at the top
  • Choose Open Terminal
  • Type bash driver.sh
  • Press Enter
  • After it has finished a report will be located on your USB drive named report.txt
  • Remove the USB drive and insert it back in your working computer and navigate to report.txt

    Please note - all text entries are case sensitive
Copy and paste the report.txt for my review
  • 0

Advertisements


#11
LSEactuary

LSEactuary

    Member

  • Topic Starter
  • Member
  • PipPip
  • 79 posts
all done.. :D

Attached Files


  • 0

#12
LSEactuary

LSEactuary

    Member

  • Topic Starter
  • Member
  • PipPip
  • 79 posts
i hope this helps.

Attached Files


  • 0

#13
Elise

Elise

    Emsisoft Research

  • Expert
  • 3,389 posts
Please boot in the recovery console. Type fixmbr at the command prompt and press enter.
When done, type EXIT and press enter and let me know if you can reboot now.
  • 0

#14
LSEactuary

LSEactuary

    Member

  • Topic Starter
  • Member
  • PipPip
  • 79 posts
i did the instructions above and its saying:

**CAUTION**

This computer appears to have a non-standard or invalid master boot record.

FIXMBR may damage your partition tables if you proceed.

This could cause all the partitions on the current hard disk to become inasscesible.

I yu are not having problems accessing your drive, do not continue.

Are you sure you want to write a new MBR?
  • 0

#15
Elise

Elise

    Emsisoft Research

  • Expert
  • 3,389 posts
You can continue there, if you do not have more than one OS (windows) installed.

If you have more than one partition let me know and do not run the fix.
  • 0






Similar Topics

0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users

As Featured On:

Microsoft Yahoo BBC MSN PC Magazine Washington Post HP