Jump to content

Welcome to Geeks to Go - Register now for FREE

Geeks To Go is a helpful hub, where thousands of volunteer geeks quickly serve friendly answers and support. Check out the forums and get free advice from the experts. Register now to gain access to all of our features, it's FREE and only takes one minute. Once registered and logged in, you will be able to create topics, post replies to existing threads, give reputation to your fellow members, get your own private messenger, post status updates, manage your profile and so much more.

Create Account How it Works
Photo

freezing screen


  • Please log in to reply

#1
carogator

carogator

    Member

  • Member
  • PipPip
  • 10 posts
Windows XP Home SP3. On startup computer loads screen with Logo and shows "Windows is starting up" then just freezes there. Have to shutdown with power button and restart. Was doing good on second try, now it takes two or three trys to get going. Am I starting to have problems with the harddrive or memory? thanks.
  • 0

Advertisements


#2
happyrock

happyrock

    Tech Moderator

  • Retired Staff
  • 9,285 posts
it could be either so first rum chkdsk /r

If you do not have a windows xp disk, download the following file: rc.iso....go here..then run chkdsk /r
from the rc.iso cd...be sure the bios is set to boot from the cd drive first...

if you don't have a burning program that will burn .ISO files go here and get burncdcc ..a small FAST no frills iso burning program...

NOTE...do not put a blank cd in until burncdcc opens the tray for you
1. Start BurnCDCC
2. Browse to the ISO file you want to burn on cd/dvd ....in this case its memtest86.iso
3. Select the ISO file
4. click on Start

make sure in the bios the cd drive is the first boot device....put the cd in the cd drive..boot your computer....when you get to the screen that gives you the option to install or repair ...select r...then when you get to the prompt...type in chkdsk /r..press enter

NOTE THE SINGLE SPACE BEFORE THE /
While chkdsk is running you will see a light blue window with a dark blue band at the top and bottom. or a black dos box depending on on which cd you use... a Chkdsk will display the specific stage it is checking as well as the percentage of completion of the stage....
there are 5 stages...it may appear to hang at a certain % for a hour or more...it even will sometimes go back over a area...this is normal...
WARNING... Microsoft does not recommend interrupting the CHKDSK process when it is used with the /r switch, and Microsoft does not guarantee the integrity of the disk if the CHKDSK program is interrupted.
DO NOT SHUT DOWN THE COMPUTER OR YOU CAN HAVE SERIOUS PROBLEMS...it can take a long time depending on how large the drive is...
You cannot do anything else on your computer while chkdsk is running. When chkdsk is finished, it will automatically reboot your computer..

then lets make sure its not your memory going bad...get memtest + here....
the lowdown is here..
get the 2nd one down and burn the ISO file to a cd and then boot it from the cd drive...

if you don't have a burning program that will burn .ISO files go here and get burncdcc ..a small FAST no frills iso
burning program...

NOTE...do not put a blank cd in until burncdcc opens the tray for you
1. Start by clicking on BurnCDCC.exe
2. Browse to the ISO file you want to burn on cd/dvd ....in this case its memtest86.iso
3. Select the ISO file
4. click on Start

make sure in the bios the cd drive is the first boot device....put the cd in the cd drive..boot your computer....
let memtest run for at least 3 hours...if it starts showing any errors during that time then you will have to replace the RAM...no errors after 3 hours just press Esc to end the tests and we will try some other tests..
  • 0






Similar Topics

0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users

As Featured On:

Microsoft Yahoo BBC MSN PC Magazine Washington Post HP