[ace in the hole]

*** STOP:0X0000007B (0XF7A60524,0XC0000034,0X00000000,0X00000000)

[Advertisements]

THIS IS WHAT MY NOTE BOOK BLUE SCREEN SAYS LIKE THE 1 SHOWN ON HERE WHEN I HIT F8AND THEN WENT TO STOP RESTARTING OR SOMETHING LIKE THAT

[ace in the hole]

THIS IS WHAT MY NOTE BOOK BLUE SCREEN SAYS LIKE THE 1 SHOWN ON HERE WHEN I HIT F8AND THEN WENT TO STOP RESTARTING OR SOMETHING LIKE THAT

[JSntgRvr]

Hi, ace in the hole



IMPORTANT:
You will need a flash drive with a size of 512 Mb or bigger. Make sure that you do not leave anything important on the flash drive, as all data on it will be deleted during the following steps.

Save these instructions in the USB drive and keep it as reference.

• 
  
  • Download OTLPEStd.exe from the following link and save it to your Desktop: mirror1.
    
  • Download eeepcfr.zip from the following link and save it to your Desktop: the mirror
    
  • Finally, if you do not have a file archiver like 7-zip or Winrar installed, please download 7-zip from the following link and install it: the mirror
• Once you have 7-zip install, decompress OTLPEStd.exe by rightclicking on the folder and choosing the options shown in the picture below. Please use a dedicated folder, for example OTLPE, on your Desktop
  
  
  
  
• Open the folder OTLPEStd which will be created in the same location as OTLPEStd.exe and right-click OTLPE_New_Std.iso. Select 7-Zip and from the submenu select Extract files... and extract the content onto your Desktop in a OTLPE folder:
  
  
  
  
• Please also decompress eeepcfr to your systemroot (usually C:\).
  
• Empty the flash drive you want to install OTLPE on, except for these instructions.
  
• Go to C:\eeecpfr and double-click usb_prep8.cmd to launch it.
  
• Press any key when asked to in the black window that opens.
  
• As indicated in the image, make sure you have selected the correct flash drive, before proceeding.
  For Drive Label: type in OTLPE.
  Under Source Path to built BartPE/WinPE Files click ... and select the folder OTLPE that you created on your Desktop.
  Finally check Enable File Copy.
  
  
  
  
  
• Click on Start, accept the disclaimers and wait for the program to finish.

Your bootable flash drive should now be ready!

• Boot the sick computer using the boot USB you just created. You must set the notebook to boot from the USB Drive. Consult the Notebook's documentation.
• Your system should now display a Reatogo desktop.
  Note : as you are running from a USB drive it is not exactly speedy
• Double-click on the OTLPE icon.
• When asked "Do you wish to load the remote registry", select Yes
• When asked "Do you wish to load remote user profile(s) for scanning", select Yes
• Ensure the box "Automatically Load All Remaining Users" is checked and press OK
• OTL should now start. Change the following settings
  
  • Change Drivers to All
  • Change Standard Registry to All
  • Under the Custom Scan box paste this in
    

    
    /md5start
    UXTHEME.DLL
    eventlog.dll
    scecli.dll
    netlogon.dll
    cngaudit.dll
    sceclt.dll
    ntelogon.dll
    logevent.dll
    iaStor.sys
    nvstor.sys
    atapi.sys
    IdeChnDr.sys
    viasraid.sys
    AGP440.sys
    vaxscsi.sys
    nvatabus.sys
    viamraid.sys
    nvata.sys
    nvgts.sys
    iastorv.sys
    ViPrt.sys
    eNetHook.dll
    ahcix86.sys
    KR10N.sys
    nvstor32.sys
    ahcix86s.sys
    nvrd32.sys
    userinit.exe
    explorer.exe
    winlogon.exe
    ntoskrnl.exe
    /md5stop
    %SYSTEMDRIVE%\*.*
    %systemroot%\*. /mp /s
    %systemroot%\System32\config\*.sav
    

• Press Run Scan to start the scan.
• When finished, the file will be saved in drive C:\OTL.txt
• Copy this file to your USB drive.
• Please post the contents of the C:\OTL.txt file in your reply.