Jump to content

Welcome to Geeks to Go - Register now for FREE

Geeks To Go is a helpful hub, where thousands of volunteer geeks quickly serve friendly answers and support. Check out the forums and get free advice from the experts. Register now to gain access to all of our features, it's FREE and only takes one minute. Once registered and logged in, you will be able to create topics, post replies to existing threads, give reputation to your fellow members, get your own private messenger, post status updates, manage your profile and so much more.

Create Account How it Works
Photo

Copy+Paste freezes web pages


  • Please log in to reply

#1
Furytear

Furytear

    New Member

  • Member
  • Pip
  • 1 posts
Hello all,I have a rather annoying problem that I just cannot figure out the cause of and thus don't know how to fix. The simple description to my problem is that any time I either use my clipboard, right click and select copy or use control+c then when I try to paste the information to a web forum or page it causes the page to just lock up. I don't get a message saying that it is not responding it just freezes me out of that page. I can still open new tabs and it otherwise doesn't affect my browser at all but if I attempt to go back to the tab that is having the problem it's like it doesn't exist anymore as it will still show the tab that I just left on my screen.

I'm hoping that any of you experts on here maybe have dealt with something like this before and can help me figure out what I can do to fix this problem. Here is all of the information that I can provide for my computer:

Operating System: Windows Vista version 6.0.6002 Service Pack 2 Build 6002
System Manufacturer: Gateway
System Model: T-1616
System Type: X86-based PC
Processor: AMD Turion™ 64 X2 Mobile Technology TL-58, 1900 Mhz, 2 Core(s), 2 Logical Processor(s)
Bios Version/Date: Gateway 90.02, 8/2/2007
SMBIOS Version: 2.4
Windows Directory: C:/Windows(it's actually a backslash but I don't have that on my keyboard)
System Directory: C:/Windows/system32(both slashes are backslashes)
Boot Device: /Device/HarddiskVolume2(again these are all backslashes)
Hardware Abstraction Layer: Version = "6.0.6002.18005"
Installed Physical Memory (RAM): 2.00 GB
Total Physical Memory: 1.62 GB
Available Physical Memory: 737 MB
Total Virtual Memory: 3.49 GB
Available Virtual Memory: 2.14 GB
Page File Space: 1.92 GB
Page File: C:/pagefile.sys(again it's actually a backslash, not a standard forward slash)
Here is all of the shared hardware listed on my computer:
I/O Port 0x0000A000-0x0000AFFF PCI Express standard Root Port
I/O Port 0x0000A000-0x0000AFFF Realtek RTL8101E Family PCI-E FE NIC
I/O Port 0x00000000-0x00000CF7 PCI Bus
I/O Port 0x00000000-0x00000CF7 Direct memory access controller
I/O Port 0x000003CO-0x000003DF PCI standard PCI-to-PCI bridge
I/O Port 0x000003CO-0x000003DF ATI Radeon X1200 Series
I/O Port 0x00009000-0x00009FFF PCI standard PCI-to-PCI bridge
I/O Port 0x00009000-0x00009FFF ATI Radeon X1200 Series
Memory Address 0xF0200000-0xF02FFFFFF PCI Express standard Root Port
Memory Address 0xF0200000-0xF02FFFFFF Realtek RTL8101E Family PCI-E FE NIC
Memory Address 0xE0000-0xE1FFF PCI Bus
Memory Address oxE0000-0xE1FFF System Board
IRQ 16 Standard OpenHCD USB Host Controller
IRQ 16 High Definition Audio Controller
IRQ 17 Standard OpenHCD USB Host Controller
IRQ 17 Standard OpenHCD USB Host Controller
IRQ 18 Standard OpenHCD USB Host Controller
IRQ 18 Standard OpenHCD USB Host Controller
IRQ 19 High Definition Audio Controller
IRQ 19 Realtek RTL8101E Family PCI-E FE NIC
IRQ 19 Standard Enhanced PCI to USB Host Controller
Memory Address 0xA0000-0xBFFFF PCI Bus
Memory Address 0xA0000-0xBFFFF PCI standard PCI-to-PCI bridge
Memory Address 0xA0000-0xBFFFF ATI Radeon X1200 Series
I/O Port 0x000003B0-0x000003BB PCI standard PCI-to-PCI bridge
I/O Port 0x000003B0-0x000003BB ATI Radeon X1200 Series
Memory Address 0xB0000000-0xBFFFFFFF PCI standard PCI-to-PCI bridge
Memory Address 0xB0000000-0xBFFFFFFF ATI Radeon X1200 Series
Components information:
Audio and Video codecs all check out ok
CD ROM checks out ok
Sound Device checks out ok
Keyboard information:
Description Standard PS/2 Keyboard
Name Enhanced (101- or 102 key)
Layout 00000409
PNP Device ID ACPI/PNP0303/4&24F3B2B9&0(the slashes are backslashes)
Number of Function Keys 12
I/O Port 0x00000060-0x00000060
I/O Port 0x00000064-0x00000064
IRQ Channel IRQ 1
Pointing Device checks out ok


Those are all of the things that I guessed could possibly be relevant to solving this problem if I overlooked anything please let me know.

I would post the Hijackthis log but it took me forever as it is to manually type in all of this so hopefully this is enough information to help find a solution to this problem.
  • 0

Advertisements







Similar Topics

0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users

As Featured On:

Microsoft Yahoo BBC MSN PC Magazine Washington Post HP