[MICHELLE!]

So just today I cleared my system or and put Windows Vista back on it. I know you have to go through and re-install drivers, but I need the internet for that and went ahead and got the internet driver from a different computer first. The problem is that after installing the driver, no networks (to include my own that I know exists) show up. I know I have the correct driver for the wireless, which is Realtek RTL8102E Family PCI-E Fast Ethernet. Any idea as to why it's not really working? When I go to Device Manager and then Network adapters to check the status on it, it says it's working properly. But it's really not. Also, the laptop is a MSI A6200 and had Windows 7 previously installed on it, if that's of any help. Thanks in advance.

[Advertisements]

can we see a device manager screen shot - anything else with yellow ! or ? - see below
also post back the status of all the services - see below

is there a switch for the wireless - physical switch or a combination of one of the F keys and FN key - is the wireless ON

lets see an xirrus screen shot and ipconfig /alland three PING Tests - see below


------------------------------------------------------------------------
ipconfig /all
If you cannot access the internet with this PC, then you will need to paste the results into something like notepad and then copy onto a machine that can access the internet and post results here

We would like to see the results from ipconfig /all post back the results in a reply here

Hold the Windows key and press R, then type CMD then press Enter to open a command prompt box (A new dialogue box - black with white font, will appear on screen ):

In the command prompt window that opens, type the following command:

Note that there is a space before the /ALL, but there is NOT a space after the / in the following command.

ipconfig /all > network.txt & network.txt

It will export the results to notepad and then automatically open notepad.

Now all you need to do is copy and paste those results to a reply here
to do that:
From the notepad menu - choose Edit - Select all
all the text will be highlighted
Next
From the notepad menu - choose Edit - Copy
Now go back to the forum - reply and then right click in the reply box and paste
------------------------------------------------------------------------

------------------------------------------------------------------------
Ping Tests
If you cannot access the internet with this PC, then you will need to paste the results into something like notepad and then copy onto a machine that can access the internet and post results here

Start> Run {search bar in Vista}> CMD to open a DOS window and type:

Type the following command
Ping {plus the number thats shown against the default gateway shown in above ipconfig /all}
Post back the results
rightclick in the box
select all
enter
control key + C key - to copy
then reply here and
control key + V to paste

Type the following command
Ping google.com
Post back the results
rightclick in the box
select all
enter
control key + C key - to copy
then reply here and
control key + V to paste

Type the following command
Ping 209.183.226.152
post back results
rightclick in the box
select all
enter
control key + C key - to copy
then reply here and
control key + V to paste
------------------------------------------------------------------------

------------------------------------------------------------------------
Run Xirrus Wi-Fi Inspector Download and install
If you cannot access the internet with this PC, then you will need to copy the program across to the faulty PC

http://www.xirrus.co...y/wifitools.php
Direct link to the program is here http://www.xirrus.co...ad_redirect.php
Then run and install the program
if you get an error - You need NET Framework installed for the WiFi Inspector to function.

Run the program

post a screen shot of the program running - if there are a lot of networks showing can you click on "networks" top lefthand area - so we can see all the network information, and also post which network "Adapter Name" (1st column) is yours on the list

To post a screen shot of the active window, hold the Alt key and press the PrtScn key. Open the Windows PAINT application and Paste the screen shot. You can then use PAINT to trim to suit, and save it as a JPG format file.
To upload it to the forum, http://www.bleepingc...topic14738.html

Note:
For a reliable (or robust as the Xirrus user guide says) wireless connection you need a signal of about -70 dBm or better.
------------------------------------------------------------------------

------------------------------------------------------------------------
Device Manager
Post back the results in device manager
If you cannot access the internet with this PC, then you will need to copy the program across to the faulty PC
Start > control Panel {Vista set to classic view}> system > {Vista, device manager on left hand side} {XP hardware Tab, device manager button} >
windows 7
start > control panel> System and Security> Device Manager

network adaptors, click on the + > post back the devices listed there
are there any ! ? or X


post a screen shot of the device manager - network adapters

To post a screen shot of the active window, hold the Alt key and press the PrtScn key. Open the Windows PAINT application and Paste the screen shot. You can then use PAINT to trim to suit, and save it as a JPG format file.
To upload it to the forum, http://www.bleepingc...topic14738.html
------------------------------------------------------------------------

------------------------------------------------------------------------
{Services}
post back the status - started/stopped and automatic/manual
Check your Services are Started on all PCs:

• COM+ Event System (for WZC issues)
• Computer Browser
• DHCP Client
• DNS Client
• Network Connections
• Network Location Awareness
• Remote Procedure Call (RPC)
• Server
• TCP/IP Netbios helper
• Wireless Zero Configuration (XP wireless configurations only)
• WLAN AutoConfig (Vista wireless configurations only)
• Workstation

Note: You can check the services in Control Panel, Administrative Tools, Services.

All of these services should be started, and their startup type should be automatic (or perhaps manual).

If a service is not running, open it's properties and check the dependencies. Check each of the dependencies and see which one is preventing the service from running.

Checking the event log is also a good idea here, there may be clues to what is failing.
Start > control panel > administrative tools > event Viewer

------------------------------------------------------------------------

[etaf]

can we see a device manager screen shot - anything else with yellow ! or ? - see below
also post back the status of all the services - see below

is there a switch for the wireless - physical switch or a combination of one of the F keys and FN key - is the wireless ON

lets see an xirrus screen shot and ipconfig /alland three PING Tests - see below


------------------------------------------------------------------------
ipconfig /all
If you cannot access the internet with this PC, then you will need to paste the results into something like notepad and then copy onto a machine that can access the internet and post results here

We would like to see the results from ipconfig /all post back the results in a reply here

Hold the Windows key and press R, then type CMD then press Enter to open a command prompt box (A new dialogue box - black with white font, will appear on screen ):

In the command prompt window that opens, type the following command:

Note that there is a space before the /ALL, but there is NOT a space after the / in the following command.

ipconfig /all > network.txt & network.txt

It will export the results to notepad and then automatically open notepad.

Now all you need to do is copy and paste those results to a reply here
to do that:
From the notepad menu - choose Edit - Select all
all the text will be highlighted
Next
From the notepad menu - choose Edit - Copy
Now go back to the forum - reply and then right click in the reply box and paste
------------------------------------------------------------------------

------------------------------------------------------------------------
Ping Tests
If you cannot access the internet with this PC, then you will need to paste the results into something like notepad and then copy onto a machine that can access the internet and post results here

Start> Run {search bar in Vista}> CMD to open a DOS window and type:

Type the following command
Ping {plus the number thats shown against the default gateway shown in above ipconfig /all}
Post back the results
rightclick in the box
select all
enter
control key + C key - to copy
then reply here and
control key + V to paste

Type the following command
Ping google.com
Post back the results
rightclick in the box
select all
enter
control key + C key - to copy
then reply here and
control key + V to paste

Type the following command
Ping 209.183.226.152
post back results
rightclick in the box
select all
enter
control key + C key - to copy
then reply here and
control key + V to paste
------------------------------------------------------------------------

------------------------------------------------------------------------
Run Xirrus Wi-Fi Inspector Download and install
If you cannot access the internet with this PC, then you will need to copy the program across to the faulty PC

http://www.xirrus.co...y/wifitools.php
Direct link to the program is here http://www.xirrus.co...ad_redirect.php
Then run and install the program
if you get an error - You need NET Framework installed for the WiFi Inspector to function.

Run the program

post a screen shot of the program running - if there are a lot of networks showing can you click on "networks" top lefthand area - so we can see all the network information, and also post which network "Adapter Name" (1st column) is yours on the list

To post a screen shot of the active window, hold the Alt key and press the PrtScn key. Open the Windows PAINT application and Paste the screen shot. You can then use PAINT to trim to suit, and save it as a JPG format file.
To upload it to the forum, http://www.bleepingc...topic14738.html

Note:
For a reliable (or robust as the Xirrus user guide says) wireless connection you need a signal of about -70 dBm or better.
------------------------------------------------------------------------

------------------------------------------------------------------------
Device Manager
Post back the results in device manager
If you cannot access the internet with this PC, then you will need to copy the program across to the faulty PC
Start > control Panel {Vista set to classic view}> system > {Vista, device manager on left hand side} {XP hardware Tab, device manager button} >
windows 7
start > control panel> System and Security> Device Manager

network adaptors, click on the + > post back the devices listed there
are there any ! ? or X


post a screen shot of the device manager - network adapters

To post a screen shot of the active window, hold the Alt key and press the PrtScn key. Open the Windows PAINT application and Paste the screen shot. You can then use PAINT to trim to suit, and save it as a JPG format file.
To upload it to the forum, http://www.bleepingc...topic14738.html
------------------------------------------------------------------------

------------------------------------------------------------------------
{Services}
post back the status - started/stopped and automatic/manual
Check your Services are Started on all PCs:

• COM+ Event System (for WZC issues)
• Computer Browser
• DHCP Client
• DNS Client
• Network Connections
• Network Location Awareness
• Remote Procedure Call (RPC)
• Server
• TCP/IP Netbios helper
• Wireless Zero Configuration (XP wireless configurations only)
• WLAN AutoConfig (Vista wireless configurations only)
• Workstation

Note: You can check the services in Control Panel, Administrative Tools, Services.

All of these services should be started, and their startup type should be automatic (or perhaps manual).

If a service is not running, open it's properties and check the dependencies. Check each of the dependencies and see which one is preventing the service from running.

Checking the event log is also a good idea here, there may be clues to what is failing.
Start > control panel > administrative tools > event Viewer

------------------------------------------------------------------------