Edited by carpetman, 05 May 2011 - 01:12 AM.
Missing Drivers
Started by
carpetman
, May 05 2011 01:09 AM
#1
Posted 05 May 2011 - 01:09 AM
#3
Posted 05 May 2011 - 09:20 AM
Field Value
North Bridge Properties
North Bridge ATI RS300
Revision 02
Memory Controller
Type Dual Channel (128-bit)
Active Mode Dual Channel (128-bit)
Memory Timings
CAS Latency (CL) 2.5T
Memory Slots
DRAM Slot #1 512 MB (DDR SDRAM)
DRAM Slot #2 512 MB (DDR SDRAM)
Integrated Graphics Controller
Graphics Controller Type ATI Radeon 9200
Graphics Controller Status Enabled
Graphics Frame Buffer Size 128 MB
AGP Controller
AGP Version 3.00
AGP Status Disabled
AGP Device ATI Radeon 9000/9100 IGP (RS300) Chipset -
AGP Aperture Size 256 MB
Supported AGP Speeds 1x, 2x, 4x, 8x
Fast-Write Supported, Disabled
Side Band Addressing Supported, Enabled
Chipset Manufacturer
Company Name ATI Technologies Inc.
Product Information http://www.ati.com/p...integrated.html
Driver Download http://www.ati.com/support/driver.html
Problems & Suggestions
Problem AGP is disabled. This may cause performance penalty.
North Bridge Properties
North Bridge ATI RS300
Revision 02
Memory Controller
Type Dual Channel (128-bit)
Active Mode Dual Channel (128-bit)
Memory Timings
CAS Latency (CL) 2.5T
Memory Slots
DRAM Slot #1 512 MB (DDR SDRAM)
DRAM Slot #2 512 MB (DDR SDRAM)
Integrated Graphics Controller
Graphics Controller Type ATI Radeon 9200
Graphics Controller Status Enabled
Graphics Frame Buffer Size 128 MB
AGP Controller
AGP Version 3.00
AGP Status Disabled
AGP Device ATI Radeon 9000/9100 IGP (RS300) Chipset -
AGP Aperture Size 256 MB
Supported AGP Speeds 1x, 2x, 4x, 8x
Fast-Write Supported, Disabled
Side Band Addressing Supported, Enabled
Chipset Manufacturer
Company Name ATI Technologies Inc.
Product Information http://www.ati.com/p...integrated.html
Driver Download http://www.ati.com/support/driver.html
Problems & Suggestions
Problem AGP is disabled. This may cause performance penalty.
#4
Posted 05 May 2011 - 09:21 AM
Field Value
Network Adapter Properties
Network Adapter 3Com 3C920B-EMB-WNM Integrated Fast Ethernet Controller
Interface Type Ethernet
Hardware Address 00-11-2F-2A-24-B9
Connection Name Local Area Connection
Connection Speed 100 Mbps
MTU 1500 bytes
DHCP Lease Obtained 05/05/2011 23:19:53
DHCP Lease Expires 06/05/2011 23:19:53
Bytes Received 15405068 (14.7 MB)
Bytes Sent 2581130 (2.5 MB)
Network Adapter Addresses
IP / Subnet Mask 192.168.0.3 / 255.255.255.0
Gateway 192.168.0.1
DHCP 192.168.0.1
DNS 192.168.0.1
Network Adapter Manufacturer
Company Name 3Com Corporation
Product Information http://www.3com.com/...ards & Adapters
Driver Download http://www.3com.com/...nloadsindex.jsp
Network Adapter Properties
Network Adapter 3Com 3C920B-EMB-WNM Integrated Fast Ethernet Controller
Interface Type Ethernet
Hardware Address 00-11-2F-2A-24-B9
Connection Name Local Area Connection
Connection Speed 100 Mbps
MTU 1500 bytes
DHCP Lease Obtained 05/05/2011 23:19:53
DHCP Lease Expires 06/05/2011 23:19:53
Bytes Received 15405068 (14.7 MB)
Bytes Sent 2581130 (2.5 MB)
Network Adapter Addresses
IP / Subnet Mask 192.168.0.3 / 255.255.255.0
Gateway 192.168.0.1
DHCP 192.168.0.1
DNS 192.168.0.1
Network Adapter Manufacturer
Company Name 3Com Corporation
Product Information http://www.3com.com/...ards & Adapters
Driver Download http://www.3com.com/...nloadsindex.jsp
#5
Posted 05 May 2011 - 09:56 AM
DHCP Lease Obtained 05/05/2011 23:19:53
DHCP Lease Expires 06/05/2011 23:19:53
Bytes Received 15405068 (14.7 MB)
Bytes Sent 2581130 (2.5 MB)
this info says you are connected to the internet
what do you see when you try going to a website
DHCP Lease Expires 06/05/2011 23:19:53
Bytes Received 15405068 (14.7 MB)
Bytes Sent 2581130 (2.5 MB)
this info says you are connected to the internet
what do you see when you try going to a website
#6
Posted 05 May 2011 - 10:19 AM
I managed to get the 3com ethernet controller from the Packard Bell website but I still have 5 missing drivers I can't find any help would be much appreciated.
Edited by carpetman, 05 May 2011 - 10:20 AM.
#8
Posted 09 May 2011 - 09:02 AM
I have scanned the PC 4 missing drivers I can't find them how do I post the list?
#10
Posted 09 May 2011 - 12:46 PM
#11
Posted 09 May 2011 - 01:26 PM
#12
Posted 09 May 2011 - 03:44 PM
go to windows update...use the custom option...on the left side look for hardware updates...get any it says you need
#13
Posted 10 May 2011 - 06:00 AM
I've done the above, but am still without sound. When I try to scan using Driver Guide(including when I re-download it) I get "run-time error 5. Invalid procedure call or argument"
#14
Posted 10 May 2011 - 07:31 AM
am I to assume all the other drivers worked and you are only missing sound now...
go here and download Everest Home Edition 1.51...launch it and click on the + beside motherboard...click on chipset...get a screenshot and post it
for me...
do the same for both motherboard and sound...
go here and download Everest Home Edition 1.51...launch it and click on the + beside motherboard...click on chipset...get a screenshot and post it
for me...
do the same for both motherboard and sound...
#15
Posted 10 May 2011 - 07:58 AM
I don't know about the other drivers because I haven't been able to scan. Am about to follow your last suggestion
Similar Topics
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users