[jycecou]

this computer will only show a black screen that says F1 to reboot F2 for system information. If you hit F1 it will just repeat the message, over and over.

[Advertisements]

Hi, welcome to GeeksToGo.

Sounds like it may be file system corruption.

You are going to have to get into BIOS Setup on your computer to set the CD/DVD drive as the first bootable device, so you can then boot your XP CD, unless it provides the ability to press a Fn key at boot time to bring up the boot selection menu. If it does, use that.

How you do this varies with each manufacturer. Normally you press F1, F2, F10 or Del when you see the manufacturers logo. Often there is a clue somewhere on the screen when you boot normally telling you what key to press. Some computers (most newer ones) have a key you can press (often F12) to bring up the Boot Menu from where you can select the CD/DVD drive to boot from.

If you don't have an XP CD, download and run ARCDC by Artellos. You can do this on any computer. It will download the required files from the Microsoft Web site and create a .iso file. It will also offer to burn the iso image to a CD for you. If you don't do it then, there is a good freeware burner called ImgBurn which will do it at a later time. If you're unsure how to do this, you can follow the tutorial here: How to Burn an ISO File

Boot the CD and at the first opportunity, enter R to start the Recovery Console.

Next, choose which XP installation you want to login to. Normally this will be 1.
Lastly you will be asked for the Administrator password. Just press the Enter key as the Administrator does not have a password (unless you gave it one, then you would enter it).

From the command prompt, enter: chkdsk /r
Allow it to complete undisturbed. It can take an hour or more depending on the size of the hard drive.

Remove the CD, type exit and the computer will reboot. Hopefully that will have fixed the problem (corrupted file system).

[Ztruker]

Hi, welcome to GeeksToGo.

Sounds like it may be file system corruption.

You are going to have to get into BIOS Setup on your computer to set the CD/DVD drive as the first bootable device, so you can then boot your XP CD, unless it provides the ability to press a Fn key at boot time to bring up the boot selection menu. If it does, use that.

How you do this varies with each manufacturer. Normally you press F1, F2, F10 or Del when you see the manufacturers logo. Often there is a clue somewhere on the screen when you boot normally telling you what key to press. Some computers (most newer ones) have a key you can press (often F12) to bring up the Boot Menu from where you can select the CD/DVD drive to boot from.

If you don't have an XP CD, download and run ARCDC by Artellos. You can do this on any computer. It will download the required files from the Microsoft Web site and create a .iso file. It will also offer to burn the iso image to a CD for you. If you don't do it then, there is a good freeware burner called ImgBurn which will do it at a later time. If you're unsure how to do this, you can follow the tutorial here: How to Burn an ISO File

Boot the CD and at the first opportunity, enter R to start the Recovery Console.

Next, choose which XP installation you want to login to. Normally this will be 1.
Lastly you will be asked for the Administrator password. Just press the Enter key as the Administrator does not have a password (unless you gave it one, then you would enter it).

From the command prompt, enter: chkdsk /r
Allow it to complete undisturbed. It can take an hour or more depending on the size of the hard drive.

Remove the CD, type exit and the computer will reboot. Hopefully that will have fixed the problem (corrupted file system).