Jump to content

Welcome to Geeks to Go - Register now for FREE

Geeks To Go is a helpful hub, where thousands of volunteer geeks quickly serve friendly answers and support. Check out the forums and get free advice from the experts. Register now to gain access to all of our features, it's FREE and only takes one minute. Once registered and logged in, you will be able to create topics, post replies to existing threads, give reputation to your fellow members, get your own private messenger, post status updates, manage your profile and so much more.

Create Account How it Works
Photo

Computer keeps crashing


  • Please log in to reply

#1
Meghna Chatterjee

Meghna Chatterjee

    New Member

  • Member
  • Pip
  • 1 posts
My computer has been crashing lately. A blue screen comes and it says dumping physical memory and restarts my computer.

It works fine for a few days but then the problem recurs. I have no idea what to do. The problem details are given below:
Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.256.1
Locale ID: 1033

Additional information about the problem:
BCCode: d1
BCP1: 00000030
BCP2: 00000002
BCP3: 00000000
BCP4: 95E7D8A5
OS Version: 6_1_7601
Service Pack: 1_0
Product: 256_1

Files that help describe the problem:
C:\Windows\Minidump\112111-21403-01.dmp
C:\Users\Meghna\AppData\Local\Temp\WER-40919-0.sysdata.xml

If someone could please help me solve the problem, I would greatly appreciate it.

Thanks

Meghna
  • 0

Advertisements


#2
rshaffer61

rshaffer61

    Moderator

  • Moderator
  • 34,114 posts
Hello Meghna Chatterjee.... Welcome to
GeeksToGo, :thumbsup:
:ph34r: :yes:

I'm sorry to hear about your issue. We will try to help you resolve this as soon as possible.
  • Please understand we are all volunteers and we are not here all the time.
  • Sometimes it may be a extended amount of time to get back to you. If it has been
    more then 3 days please shoot me a PM and I will try to get back to you quickly
    then.
  • Please do the following and supply the requested information as needed. If you
    don't understand my instructions please ask and I will try to explain them
    clearer for you.
  • Do not attempt any steps unless instructed or ask before to
    make sure they will not cause any further issues.
  • If you are receiving assistance in any other forum site please let us know as there may be conflicting advice given.


Before we can help you need to provide the following so I can start you in the right direction.
Laptop or Desktop?
  • If a name brand system then what brand, make and model is the system?
  • If custom built then what brand, make and model is the motherboard
  • Total memory installed
  • Total hard drive capacity and free space
  • What steps have you taken so far to resolve the issue

First off a explanation of the BSOD you are receiving.

0x000000D1: DRIVER_IRQL_NOT_LESS_OR_EQUAL
(Click to consult the online Win XP Resource Kit article.)
The system attempted to access pageable memory using a kernel process IRQL that was too high. The most typical cause is a bad device driver (one that uses improper addresses). It can also be caused by caused by faulty or mismatched RAM, or a damaged pagefile.



Secondly the first step is the most obvious which is memory.




If you have more than one RAM module installed, try starting computer with one RAM stick at a time.

NOTE Keep in mind, the manual check listed above is always superior to the software check, listed below. DO NOT proceed with memtest, if you can go with option A

B. If you have only one RAM stick installed...
...run memtest...


1. Download - Pre-Compiled Bootable ISO (.zip). If you prefer to use the USB version then use this link USB KEY
2. Unzip downloaded /memtest86+-4.20.iso.zip file.
3. Inside, you'll find /memtest86+-4.20.iso file.
4. Download, and install ImgBurn: http://www.imgburn.com/
5. Insert blank CD into your CD drive.
6. Open ImgBurn, and click on Write image file to disc
7. Click on Browse for a file... icon:

Posted Image

8. Locate [b/memtest86+-4.20.iso[/b] file, and click Open button.
9. Click on ImgBurn green arrow to start burning bootable memtest86 CD:

Posted Image

10. Once the CD is created, boot from it, and memtest will automatically start to run. You may have to change the boot sequence in your BIOS to make it work right.

To change Boot Sequence in your BIOS

Reboot the system and at the first post screen (where it is counting up memory) start tapping the DEL button
This will enter you into the Bios\Cmos area.
Find the Advanced area and click Enter
Look for Boot Sequence or Boot Options and highlight that click Enter
Now highlight the first drive and follow the directions on the bottom of the screen on how to modify it and change it to CDrom.
Change the second drive to the C or Main Drive
Once that is done then click F10 to Save and Exit
You will prompted to enter Y to verify Save and Exit. Click Y and the system will now reboot with the new settings.


The running program will look something like this depending on the size and number of ram modules installed:


Posted Image

It's recommended to run 5-6 passes. Each pass contains very same 8 tests.

This will show the progress of the test. It can take a while. Be patient, or leave it running overnight.

Posted Image

The following image is the test results area:

Posted Image

The most important item here is the “errors” line. If you see ANY errors, even one, most likely, you have bad RAM.
  • 0






Similar Topics

0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users

As Featured On:

Microsoft Yahoo BBC MSN PC Magazine Washington Post HP