[Venshard]

I am unable to run my computer. It resets when i get to system loading bar. Just before it does i get the blue screen showing:

*** STOP : 0x00000024 (0x00190203 , 0x8A756EF0 , 0xC0000102 , 0x00000000 )

If anyone could explain what's wrong...

[Advertisements]

I am unable to run my computer. It resets when i get to system loading bar. Just before it does i get the blue screen showing:

*** STOP : 0x00000024 (0x00190203 , 0x8A756EF0 , 0xC0000102 , 0x00000000 )

If anyone could explain what's wrong...

That is not a big problem man, restore you system by booting in through safe mode. Please feed back for further instructions

Good lucky

[Chaputika]

I am unable to run my computer. It resets when i get to system loading bar. Just before it does i get the blue screen showing:

*** STOP : 0x00000024 (0x00190203 , 0x8A756EF0 , 0xC0000102 , 0x00000000 )

If anyone could explain what's wrong...

That is not a big problem man, restore you system by booting in through safe mode. Please feed back for further instructions

Good lucky

[rshaffer61]

0x00000024: NTFS_FILE_SYSTEM
(Click to consult the online MSDN article.)
A problem occurred within NTFS.SYS, the driver file that allows the system to read and write to NTFS file system drives. There may be a physical problem with the disk, or an Interrupt Request Packet (IRP) may be corrupted. Other common causes include heavy hard drive fragmentation, heavy file I/O, problems with some types of drive-mirroring software, or some antivirus software. I suggest running ChkDsk or ScanDisk as a first step; then disable all file system filters such as virus scanners, firewall software, or backup utilities. Check the file properties of NTFS.SYS to ensure it matches the current OS or SP version. Update all disk, tape backup, CD-ROM, or removable device drivers to the most current versions.

How To Run Chkdsk /r from Recovery Console:


How to run checkdisk from recovery console (Windows xp). (Courtesy dsenette)

• Insert the Windows XP startup disk into the floppy disk drive, or insert the Windows XP CD-ROM into the CD-ROM drive, and then restart the computer.
  Note:Click to select any options that are required to start the computer from the CD-ROM drive if you are prompted to do so.
• When the "Welcome to Setup" screen appears, press R to start the Recovery Console.
  Note:If you have a dual-boot or multiple-boot computer, select the installation that you want to access from the Recovery Console.
• When you are prompted to do so, type the Administrator password. If the administrator password is blank, just press ENTER.
• At the Recovery Console command prompt, type the following then press Enter:
  

  chkdsk /r

• Allow this to run UNDISTURBED until completed (45 min or so)
• Report any errors