Upgrading an HP Pavilion Slimline desktop. Help would be greatly appre
#17
- Group: Member
- Posts: 15
- Joined: 10-January 12
Posted 15 January 2012 - 05:16 PM
Alrighty, then, that oughta work.
Can you recommend a higher wattage PSU thats not too pricy?
Can you recommend a higher wattage PSU thats not too pricy?
#18
- Group: Technician
- Posts: 9,115
- Joined: 25-August 09
Posted 15 January 2012 - 05:50 PM
The Corsair PSUs are less expensive at the moment http://www.newegg.co...N82E16817139027
#19
- Group: Member
- Posts: 15
- Joined: 10-January 12
Posted 24 February 2012 - 03:16 AM
Alrighty then, update time.
After a much longer than necessary wait due to Amazon's BS international shipping methods, I finally got myself an Antec "Sonata Pro" case.
As one would expect, I'm much too scared to start hacking into my current case and moving parts about. So, could anyone lay out the steps for me, or offer any assistance?
After a much longer than necessary wait due to Amazon's BS international shipping methods, I finally got myself an Antec "Sonata Pro" case.
As one would expect, I'm much too scared to start hacking into my current case and moving parts about. So, could anyone lay out the steps for me, or offer any assistance?
#20
- Group: Technician
- Posts: 9,115
- Joined: 25-August 09
Posted 25 February 2012 - 02:46 AM
Welcome back Dudeface
Check out the tutorial provided by Troy and Artellos respectively http://www.geekstogo...r-own-computer/
Some very important things to remember;
1: Always disconnect the power from the wall socket before you start.
2: Take anti static precautions before handling components, you can do this by touching a bare metal part of the case.
3: If stand offs are to be used to mount the MB (motherboard) they should only be located where there is a corresponding screw hole in the MB, you will short out the MB and possibly other components otherwise.
Any problems along the way give us a shout, definitely let us know when you are up and running.
Check out the tutorial provided by Troy and Artellos respectively http://www.geekstogo...r-own-computer/
Some very important things to remember;
1: Always disconnect the power from the wall socket before you start.
2: Take anti static precautions before handling components, you can do this by touching a bare metal part of the case.
3: If stand offs are to be used to mount the MB (motherboard) they should only be located where there is a corresponding screw hole in the MB, you will short out the MB and possibly other components otherwise.
Any problems along the way give us a shout, definitely let us know when you are up and running.
#21
- Group: Member
- Posts: 15
- Joined: 10-January 12
Posted 22 April 2012 - 03:37 AM
Alright, so I've finally gotten off my butt and actually managed to build the [bleep] thing. So, I get the PSU all hooked up, disc drive, hard drive, motherboard, and etc. Press the power button and......
nothing. Nada.
I have no idea what went wrong, which isnt surprising considering I know absolutely nothing about the inner machinations of computers. No doubt, I'm missing some painfully obvious step that even a half-blind iguana could see.
Included are two pictures I thought were relevent. If any more are needed, don't hesitate to ask.
nothing. Nada.
I have no idea what went wrong, which isnt surprising considering I know absolutely nothing about the inner machinations of computers. No doubt, I'm missing some painfully obvious step that even a half-blind iguana could see.
Included are two pictures I thought were relevent. If any more are needed, don't hesitate to ask.
#22
- Group: Technician
- Posts: 9,115
- Joined: 25-August 09
Posted 22 April 2012 - 03:48 AM
I note in your two pictures that 1: there is no heatsink and cooling fan mounted on the CPU and 2: that there seems to be cables that are not connected to anything and in contact with the MB which may short out your system.
I hope you have not applied any power to the system while in this condition.
As advised in post #20 please read carefully and follow the tutorial http://www.geekstogo...r-own-computer/
And you must also clean and prepare the heatsink and CPU fan correctly before applying thermal paste such as Arctic Silver 5 http://www.geekstogo...rface-material/
I hope you have not applied any power to the system while in this condition.
As advised in post #20 please read carefully and follow the tutorial http://www.geekstogo...r-own-computer/
And you must also clean and prepare the heatsink and CPU fan correctly before applying thermal paste such as Arctic Silver 5 http://www.geekstogo...rface-material/
#23
- Group: Member
- Posts: 15
- Joined: 10-January 12
Posted 22 April 2012 - 05:38 PM
I moved the cables out of the way before applying power.
#25
- Group: Member
- Posts: 15
- Joined: 10-January 12
Posted 23 April 2012 - 04:04 PM
Bumping for great justice.
Also, I'll be taking the computer down to a friend of mine who works in IT, see what he thinks.
Also, I'll be taking the computer down to a friend of mine who works in IT, see what he thinks.
#26
- Group: Technician
- Posts: 9,115
- Joined: 25-August 09
Posted 24 April 2012 - 10:17 AM
Sorry for the delay - work gets in the way sometimes**
From my post #22
And
Was power applied?
Please let us know how you get on.
**
My previous last reply was posted 25 February 2012 - 09:46 AM and your next reply was posted 22 April 2012 - 10:37 AM
Dudeface, on 22 April 2012 - 05:38 PM, said:
I moved the cables out of the way before applying power.
From my post #22
Quote
I note in your two pictures that 1: there is no heatsink and cooling fan mounted on the CPU
And
Quote
I hope you have not applied any power to the system while in this condition.
Was power applied?
Quote
Also, I'll be taking the computer down to a friend of mine who works in IT, see what he thinks.
Please let us know how you get on.
**
Quote
Bumpity bump bump
Quote
Bumping for great justice.
My previous last reply was posted 25 February 2012 - 09:46 AM and your next reply was posted 22 April 2012 - 10:37 AM
