[Steven Gottlieb]

Ron,
I disabled Net.Tcp Port Sharing Service and rebooted but no change. The log you requested is below. I will now uninstall/install Microsoft.Net Framework 3.0.
Thank you,
Steven




reset SYSTEM\CurrentControlSet\Services\Netbt\Parameters\Interfaces\Tcpip_{58585FA8-98F2-498E-B608-2040DE90B2D2}\NameServerList
old REG_MULTI_SZ =
<empty>

added SYSTEM\CurrentControlSet\Services\Netbt\Parameters\Interfaces\Tcpip_{58585FA8-98F2-498E-B608-2040DE90B2D2}\NetbiosOptions
deleted SYSTEM\CurrentControlSet\Services\Netbt\Parameters\EnableProxy
deleted SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\Interfaces\{231F8E8E-67D4-4EBC-AB76-7E4C860417E1}\IpAutoconfigurationAddress
deleted SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\Interfaces\{231F8E8E-67D4-4EBC-AB76-7E4C860417E1}\IpAutoconfigurationMask
deleted SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\Interfaces\{231F8E8E-67D4-4EBC-AB76-7E4C860417E1}\IpAutoconfigurationSeed
deleted SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\Interfaces\{58585FA8-98F2-498E-B608-2040DE90B2D2}\NameServer
added SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\NameServer
reset Linkage\UpperBind for {1A3E09BE-1E45-494B-9174-D7385B45BBF5}\NVNET_DEV03EF\4&1638C5CE&0&000. bad value was:
REG_MULTI_SZ =
PSched

reset Linkage\UpperBind for ROOT\MS_NDISWANIP\0000. bad value was:
REG_MULTI_SZ =
PSched

<completed>

<completed>

[Advertisements]

I uninstalled Microsoft.Net Framework 3.0.

[Steven Gottlieb]

I uninstalled Microsoft.Net Framework 3.0.

[RKinner]

You will need to reinstall it and the newer versions too.

[Steven Gottlieb]

Ron,
I am going to need more help with this. I have no idea what to install.
Thank you,
Steve

[Steven Gottlieb]

Ron,
OK, I think I download everything that was needed.(??)

[RKinner]

So any luck with getting Net.Tcp Port Sharing Service or AFD to start?

[Steven Gottlieb]

Ron,
I'm not sure what you are asking. I did mention that I disabled Net.Tcp Port Sharing Service. AFD to start? I still need to go to command prompt to get online.
Thank you,
Steven

[RKinner]

Right click on My Computer and select Manage then Device Manager. View, Show hidden Devices. In the right pane find Network Adapters.

Click on the + in front of Network Adapters then right click on each adapter and Uninstall. Reboot. XP should rediscover and reinstall each adapter.

[Steven Gottlieb]

Ron,
This didn't work out very well. For all, but one, I got the message--Failed to uninstall the device. The device may be required to boot up the computer. I was able to uninstall my nividia nforce ethernet and upon reboot it did reinstall.
Thank you,
Steven

[RKinner]

Which one said -Failed to uninstall the device. The device may be required to boot up the computer?

[Steven Gottlieb]

direct parallel
nvidia nforce network controller-packet scheduler miniport
wan miniport (ip)
wan miniport (ip)- packet scheduler miniport
wan miniport (ip) (l2tp)
wan miniport (ip)(pppoe)
wan miniport (ip)(pptp)

[RKinner]

Let's try resetting the registry permissions to the defaults.

Download SubInACL.exe

http://www.microsoft...&displaylang=en

By default it installs the tool in C:\Program Files\Windows Resource Kits\Tools\

Please allow it to do so.


Download and Save the attached file, reset2.zip, right click on it and Extract all and copy the reset2.cmd file to C:\Program Files\Windows Resource Kits\Tools\.
Start, Run, cmd, OK Type with an Enter after the line:

reset2.cmd

Reboot and see if
net start afd

says it is running.

If not then the only thing I know to do now is to reinstall tcpip. Usually this works fine but I did have one case where it deleted OK but would not reinstall and we had to reload XP. That's why I now call for a registry backup before trying it.

Do you have the file:

C:\WINDOWS\inf\nettcpip.inf

IF so. Back up your registry:

http://pcsupport.abo...backupxpreg.htm

Then see if you can follow the steps in the Hardcore method when nothing else is working section on

http://smokeys.wordp...p3-tcpip-stack/

[Steven Gottlieb]

Ron,
Start, Run, cmd, OK Type with an Enter after the line:reset2.cmd--got the following error--'reset2.cmd' is not recognized as an internal or external command, operable program or batch file.

[RKinner]

Try

cd  "\Program Files\Windows Resource Kits\Tools"

then

reset2.cmd

[Steven Gottlieb]

Ron,
I ran the program.
net start afd is running.
Thank you,
Steven