And it looks like I need to get enough out of this old PC to save for a new one.
PC restarts with a Blue Screen Flash
#31
- Group: Member
- Posts: 334
- Joined: 18-July 09
Posted 29 April 2012 - 05:12 PM
And it looks like I need to get enough out of this old PC to save for a new one.
#32
- Group: Member
- Posts: 7,232
- Joined: 13-March 10
Posted 29 April 2012 - 05:21 PM
It looks like the cheapest unless you can find better is about $60
http://www.newegg.co...ves&Order=PRICE
As my colleague happyrock has said, it MAY be the case of - do you spend another $60 having already spent on the motherboard.
http://www.newegg.co...ves&Order=PRICE
As my colleague happyrock has said, it MAY be the case of - do you spend another $60 having already spent on the motherboard.
#33
- Group: Member
- Posts: 334
- Joined: 18-July 09
Posted 29 April 2012 - 07:45 PM
well I appreciate the help from you two. But it seems I have some decisions to make here. I can not get the repair disk to work, it says it can't find the EULA. I will continue to work on that. I will check back in a few days. I'm going to post the issue on the link and see if there some resolution.
#34
- Group: Member
- Posts: 7,232
- Joined: 13-March 10
Posted 30 April 2012 - 07:09 AM
butterice
To which link do you refer please?
If you mean the link that my colleague happyrock provided you with in his post 16
http://www.geekstogo...ws-XP-t138.html
please be advised that that link is a pinned topic on the subject of Repair installation of Windows and is not for active advice.
Why do you not just run the test of the drive I sent you, although you can see the results of the chkdsk for yourself, this will I feel provide you with the additional confirmation.
Additionally if you run the Avast uninstall, you may eliminate one of the errors.
Also you asked a question on your post 19 about the compatability of your computer for Windows Vista or 7.
The answer of course comes back to the reliability of your system as a whole
However to answer the question, without considering that aspect, albeit you would I think be ill-advised to ignore it, here is the link you need
http://windows.micro...roducts/upgrade
The online upgrade compatability check for Vista is no longer avilable, but if it wil run 7 it will run vista.
Quote
I'm going to post the issue on the link and see if there some resolution.
To which link do you refer please?
If you mean the link that my colleague happyrock provided you with in his post 16
http://www.geekstogo...ws-XP-t138.html
please be advised that that link is a pinned topic on the subject of Repair installation of Windows and is not for active advice.
Why do you not just run the test of the drive I sent you, although you can see the results of the chkdsk for yourself, this will I feel provide you with the additional confirmation.
Additionally if you run the Avast uninstall, you may eliminate one of the errors.
Also you asked a question on your post 19 about the compatability of your computer for Windows Vista or 7.
The answer of course comes back to the reliability of your system as a whole
However to answer the question, without considering that aspect, albeit you would I think be ill-advised to ignore it, here is the link you need
http://windows.micro...roducts/upgrade
The online upgrade compatability check for Vista is no longer avilable, but if it wil run 7 it will run vista.
#35
- Group: Member
- Posts: 334
- Joined: 18-July 09
Posted 01 May 2012 - 09:13 PM
I am going to run them. I'm just trying to figure out how to use that suggestion that Happy Rock sent. When I use the program and insert the disk, it will stop at the EULA. I'm told this disk only repairs. It's asking me what to repair and I don't know what put in the box. The instructions only tell you how run the disk if you hit enter.
#36
- Group: Moderator
- Posts: 9,285
- Joined: 16-May 06
Posted 02 May 2012 - 09:03 AM
you press the r key
#37
- Group: Member
- Posts: 334
- Joined: 18-July 09
Posted 02 May 2012 - 01:41 PM
Ok. What I'm trying to explain is this - I have pressed the "R" key. After doing so it askes "what do you want to repair?" I don't know what to enter. The instructions do not tell you that. The instructions only tell you what to do if you hit "enter".
I hit R again. It brings to a black screen showing c:/ then asks, what installation do I want to repair. I have not idea what put there.
I hit R again. It brings to a black screen showing c:/ then asks, what installation do I want to repair. I have not idea what put there.
#38
- Group: Member
- Posts: 334
- Joined: 18-July 09
Posted 03 May 2012 - 09:05 PM
MacBoatmaster -
I tried both Disk Checks you sent - Fujitsu and SeaTools. SeaTools wanted me to download Net Framework V 4.0. I did that. Twice. And the program kept telling me it needed it. I eventually uninstalled all of it. Fujitsu didn't work at all.
Is there any help on what Happy Rock wants me to run. After I hit "R", it's asking what I want to repair. I don't know what to put in.
I tried both Disk Checks you sent - Fujitsu and SeaTools. SeaTools wanted me to download Net Framework V 4.0. I did that. Twice. And the program kept telling me it needed it. I eventually uninstalled all of it. Fujitsu didn't work at all.
Is there any help on what Happy Rock wants me to run. After I hit "R", it's asking what I want to repair. I don't know what to put in.
#39
- Group: Member
- Posts: 7,232
- Joined: 13-March 10
Posted 04 May 2012 - 06:04 AM
But Fujitsu would not work because
I posted this
You then confirmed that it was a samsung drive, and I then posted
So use the Seagate for DOS
that will not ask you to install any net framework as it runs in dos
http://www.seagate.c...loads/seatools/#
then click downloads and select the Seatools for Dos
I posted this
Quote
I think Acer Travelmate had Fujitsu drives if so here is there disk check
http://storage.toshi...tware-utilities
If it is NOT a Fujitsu that will not run so use the Seatools for dos which will run on any hard drive but only in a limited test mode
http://www.seagate.c...loads/seatools/
Go Device Manager - expand disk drives, what is shown please as the identifier for C drive, you may well identify the make from there
http://storage.toshi...tware-utilities
If it is NOT a Fujitsu that will not run so use the Seatools for dos which will run on any hard drive but only in a limited test mode
http://www.seagate.c...loads/seatools/
Go Device Manager - expand disk drives, what is shown please as the identifier for C drive, you may well identify the make from there
You then confirmed that it was a samsung drive, and I then posted
Quote
Samsung have been taken over by Seagate, in so far as relates to Hard drives.
So you will have to use the Seagate dick check,
Seagate for dos will check any
Seagate for windows is compatible with samsung drives.
The original Samsung software has been withdrwawn by Seagate from their website.
So you will have to use the Seagate dick check,
Seagate for dos will check any
Seagate for windows is compatible with samsung drives.
The original Samsung software has been withdrwawn by Seagate from their website.
So use the Seagate for DOS
that will not ask you to install any net framework as it runs in dos
http://www.seagate.c...loads/seatools/#
then click downloads and select the Seatools for Dos
#40
- Group: Member
- Posts: 334
- Joined: 18-July 09
Posted 04 May 2012 - 06:07 PM
I understood what you posted, I just didn't know to use DOS with the Seatools. I only tried Fujitsu cause I thought - what the heck, maybe the computer didn't detect it right. Going to use the DOS now. THank you for clarifying, MacBoatmaster.
#41
- Group: Member
- Posts: 334
- Joined: 18-July 09
Posted 05 May 2012 - 11:36 AM
I honestly don't know why I'm having a tough time with this. It seems it should be so easy. When I download the SeaTool for DOS it d/l's as a WinRAR. Is it supposed to do that? And if so, what am I supposed to open - inside there is nothing but text files and .ima's. I even tried burning the download as it was - a WinRAR,thinking the set up will happen when it boots and of course it won't boot up.
Either way I do this - it doesn't boot up at all and I have changed the boot up order. I don't know what I'm doing wrong.
Either way I do this - it doesn't boot up at all and I have changed the boot up order. I don't know what I'm doing wrong.
#42
- Group: Member
- Posts: 7,232
- Joined: 13-March 10
Posted 05 May 2012 - 12:03 PM
Have you read the instructions it is an ISO file you have to burn the CD using an iso burner
Here are the instructions
http://www.seagate.c...ols-dos-master/
and to make it easier for you here is an iso burner you can use
http://www.terabyteu...ds/burncdcc.zip
Here are the instructions
http://www.seagate.c...ols-dos-master/
and to make it easier for you here is an iso burner you can use
http://www.terabyteu...ds/burncdcc.zip
- Open BurnCDCC with Windows Explorer
- Extract All files to a location you can remember
- Double Click
BurnCDCC - Click Browse and navigate to the Seagate ISO file you just downloaded
- Open/Double Click that file
IMPORTANT: Adjust the speed bar to CD: 4x DVD: 1x
- Click Start
- Your CD Burner Tray will open automatically
- Insert a blank CD and close the tray
- Click OK
#43
- Group: Member
- Posts: 334
- Joined: 18-July 09
Posted 05 May 2012 - 12:24 PM
Yes, I read the instructions. I'm to download Seatools for Dos to my Desktop (did that 3 times). From there, I burn it to my disc. Included in the instructions (that tell you how to burn)were links to Nero and Roxio. I have Nero. In Nero 10 Burnlite, I'm supposed to use the "data burn" option. Did that. It shows that it's burning to the disk (did this 3 times). Disk kicks out when complete. It does not boot up. I have changed the order as well, still nothing.
I will try the link you sent in the post and see it helps. I know you are likely becoming frustrated here, and I'm sorry.
I will try the link you sent in the post and see it helps. I know you are likely becoming frustrated here, and I'm sorry.
#44
- Group: Member
- Posts: 7,232
- Joined: 13-March 10
Posted 05 May 2012 - 03:46 PM
No I am not becoming frustrated I just want to try and solve that for you
I do not know the Nero 10, but it will not be data burn it will be ISO image or whatever words Nero use
I do not know the Nero 10, but it will not be data burn it will be ISO image or whatever words Nero use
#45
- Group: Member
- Posts: 334
- Joined: 18-July 09
Posted 05 May 2012 - 06:29 PM
Okay! SUCCESS! Unfortunately the long version detected way too many bad sectors and stopped at about 38%. At that point I believe the count was 77 issues. The program couldn't "repair". Now I'm trying to get the log so I can post it. I'm also reading the "Bad Sector Found" page. Thank you for hanging in there with me.
